• Journal of the Society of Naval Architects of Korea
• /
• 제55권6호
• /
• pp.482-489
• /
• 2018

Most of the numerical and experimental studies on supercavitating flows are focused on the cavitator only. However, the partial cavity growing into the supercavity is affected by the shape of the body placed behind the cavitator. In this paper, we develope a numerical method which is based on the boundary element method to predict supercavitating flow around three-dimensional axisymmetric bodies. We estimate the influence of the body shape on the supercavity growth. Here, we consider various parameters of the body such as cavitator shape, shoulder length and body diameter, and compare the results with the case of the cavitator only. In summary, it is found that the body may impede the cavity growth, the shoulder mainly affects the cavity length, and the supercavity occurring in the cone type cavitator is strongly influenced rather than that of the disk type cavitator.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제19권3호
• /
• pp.516-524
• /
• 1995

The purpose of this study was to analyze the variation of body shape and to. divide growth period into some age groups based on body type. Duncan Test, Heath-Carter's somatotyping method and allottery equation (y=baa) were applied to semiautomatic data concerning obesity/leakiness. The materials were 309 females aged from 12 to 17 years old. The following results were obtained: 1. In the Developmental trend of the human body, the 12-13 age groups belonged to the acceleration stage of adolescent growth spurt. The 14-15 age groups belonged to the latter period of adolescent growth. The 16-17 age groups belonged to the termination stage of adolescent growth. 2. In the Heath-Carter's somatotyping method, the average somatotype changed into M.M- C-C-M-D with age. 3. In the alphamerical analysis, the first critical point appeared at the stature 146 Cm in case of weight, LBM and fat. The second critical point appeared at the stature 154-157 Cm in case of LBM and Fat. All the three measurement showed positive allotmentty.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제17권1호
• /
• pp.119-128
• /
• 1993

This paper is to show the difference in body shape between 2 female groups; one group of 129 subjects is from 18 to 24 years old and the other group of 49 subjects from 25 to 29. Anthropometric somatotyping method by Heath-Carter and descriptive classification method by Sheldon are applied to classify somatotype. There is no difference in somatotype between 2 groups. The average somatotype is 443, which is the balanced type. By comparing the results of T-test, principal component analysis, and factor score, detailed differences in body shape between 2 groups are shown. The results of factor score for obesity factor of both groups are almost same and agree to somatotype results.

• Fashion & Textile Research Journal
• /
• 제10권5호
• /
• pp.660-667
• /
• 2008

The purpose of this study was to modify a Flared Skirt for women according to the somatotype of lower body. The subjects for the wear test were 3 students, who were in $mean{\pm}1{\sigma}$ each somatotype. The results of this study are as follows: First, the Flared Skirt pattern was modified according to each type. The front waist line rising measurement proposed for type 1 and type 2 were 0.5cm, because of lower front silhouette with waist shape. The back waist line rising measurement proposed for type 2 was 1cm and type 3 was 0.5cm, because of lower back shape with hip. Second, the wave-height of nodes were regular at front and back in type 1. Also, the wave-height of nodes were evenly distributed side and center. The variation ratio of wave-height of back nodes were lower than existing pattern in type 2 and type 3. It means the variation ratio of wave-height of back nodes were regular in modification pattern. Altogether, modification patterns were more regular and lower than existing pattern in the number of nodes, the distribution ratio of nodes, the wave-height of node, the variation ratio of wave height of nodes.

• Journal of the Korean Home Economics Association
• /
• 제30권3호
• /
• pp.15-32
• /
• 1992

The purpose of this study was to detect the effect of the lower body type on the shape of flare skirts. The subjects for the wearing test were 50 female students, who were controlled in their hip and waist shapes. The skirts used for wearing test were six types(three flar angles $\times$ two fabric types). The effect of lower body type on the shape of flare skirts was determind by the hemline trace method and the silhouette photography. The data were then analyzed by the repeated measures of analysis of variance and the SNK multiple range test. The results obtained from this study were as follows : 1) When a flare skirt made with larger flare angle and better drapable fabric was worn, the numeric of the nodes increased as the drop value(hip - waist) increased. When a flare skirt made with smaller flare angle was worn, the width of horizontal sectio of hemline increased as the drop value increased. The hemline uneveness decreased on the sides and back as the drop value increased. When a flare skirt made with worse drapable fabric was worn, the sides angle of the flarskirt increased as the drop value increased. 2) When a flare skirt made with larger flare angle was worn, the numeric of nodes increased as the ratio of dropped hip increased. The wave-height increased and the back variation ratio of wave-height was higher than the front variation ratio of wave-height as the ratio of dropped hip increased. The hemiline uneveness decreased on the back as the ratio of dropped hip increased. When a flare skirt made with larger flare angle was worn, the sides angle of the flare skirt increased as the ratio of dropped hip increased.

• The Research Journal of the Costume Culture
• /
• 제29권3호
• /
• pp.388-405
• /
• 2021

This study classifies the compositional methods of power shoulder jackets from 1980 to the present. It analyzes the relevance of jacket details according to how the power shoulder changes and its compositional methods by era. The research subdivides shoulder compositional techniques into seven, based on shoulder variation, sleeve variation, and the body and sleeve combination. The researcher investigates the frequency and trends of composing shoulders and analyzes details pertaining to the silhouette, jacket length, collar shape, and front closure. The most common method of shoulder composition is an angular shoulder variation. The others are a rounded shoulder variation, puffed sleeve, sleeve variation using pattern incision, raglan and kimono sleeves, and a shoulder variation that expanded the angle and width. The frequency differs slightly for each era. The relationship between shoulder compositional methods and details of power shoulder jackets is statistically significant, showing period-related differences. The homogeneity analysis results reveal that the shoulder composition of power shoulder jackets, the times, and details fall into distinct groups. This analysis shows that the silhouette, length, collar, and front closure of the power shoulder jacket differ depending on the power shoulder's compositional methods. Moreover, the shape of the power shoulder jacket is distinctly different. One can use this data to help develop the power shoulder jacket design by reflecting the details of shoulder compositional methods and changing trends over time.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.799-809
• /
• 2020

In this study, the supercavitating flow of a high-velocity moving body near air-water surface is calculated and analyzed based on a commercial CFD software ANSYS Fluent. The effect of regular wave parameters including both wave height and wavelength on the cavitating flow and force characteristics of a body at different velocities is investigated. It is found that the cavity shape, lift coefficient and drag coefficient of the body vary periodically with wave fluctuation, and the variation period is basically consistent with wave period. When the wavelength is much greater than the cavity length, the effect of wave on supercavitation is the alternating effect of axial compression and radial compression. However, when the wavelength varies around the cavity length, the cavity often crosses two adjacent troughs and is compressed periodically by the two wave troughs. With the variation of wavelength, the average area of cavity shows a different trend with the change of wave height.

• Journal of the Society of Naval Architects of Korea
• /
• 제40권1호
• /
• pp.63-68
• /
• 2003

Systematic geometrical variation method of hull forms, such as "1 -Cp", "Swinging" and "Lackenby" are widely used in the early stage of a new design from those of a similar parent ship, which shows a better performance through the model test and/or sea trials. This method is simple and easy to modify original hull forms without changing the main characteristics. The shape of the prismatic curie can be easily varied by these methods, however, the frame line shape in the body plan can′t be generated easily, when the section shapes are complicated or have discontinuities or the mismatch of the body plan and the stem and stern profiles. To overcome this drawback of the hull form variations, a simple and useful method has been proposed in the present study.

• The Research Journal of the Costume Culture
• /
• 제13권3호
• /
• pp.439-451
• /
• 2005

This study was to provide the fundamental data for the ease necessary to design clothes by investigating the variation of the upper body surface with the method of surgical tape. The subject were 8 young women in the standard somatotype. In the form of body surface according to arm movements, the shape of armscye circumference became gentle from the sunken form for the standing posture; scye depth became lower; lateral shoulder moved and rose toward the front center as the angle of arm movement became larger; scye depth is greatest in the standing. The items of horizontal ware largest in the standing posture except for front neck base circumference and front interscye breadth for side $90^{\circ}$ movement. In the items of vertical, while most of the front items increased but back ones generally decreased for all movement compared to the standing. After comparing differences in actual values between the form of body surface in the standing posture and the direct measurement, the following ease were suggested considering minimum measures to accommodate daily movements. Bust circumference/2 = 3cm; waist circumference/2 = 1.5cm; front interscye breadth/2 = 0.6cm; back interscye breadth/2 = 0.6cm; and underarm depth = 1.5cm

• Fashion & Textile Research Journal
• /
• 제10권5호
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.