• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.428-439
• /
• 2011

It is well known that the sound characteristics of Korean bell depend on the shape and the alloy constituents. Development of the methods to acquire exact shape data and alloy constituents of the whole body of the bell is very important for the study and systematic management of Korean bells. The practical scanning and modeling methods to get shape data from optical triangulation laser scanners are proposed. The 3D shape data by the proposed methods can be the basis of diverse measurements such as curvature, volume, thickness and the distance between any two points. A nondestructive alloy constituents measuring method which can overcome the limitations of partial data collection and damages to Korean bells is also suggested to get the whole alloy characteristics. Following the developed methods, the data of the shapes and alloy constituents of 18 Korean bells are collected and the errors of existing measurement data for the shape have been corrected.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.65-70
• /
• 2020

Partial reinforcement of sheet metal parts with CFRP patch is a technology that can realize ultra-lightweight body parts while overcoming the high material cost of carbon fiber. Performing these patchworks with highly productive press equipment solves another issue of CFRP: high process costs. The A-pillar is the main body part and has an undercut shape for fastening with other parts such as roof panels and doors. Therefore, it is difficult to bond CFRP patches to the A-pillar with a general press forming tool. In this paper, a flexible system that applies uniform pressure to complex shapes using ceramic particles and silicone rubber is proposed. By benchmarking various A-pillars, a reference model with an undercut shape was designed, and the system was configured to realize a uniform pressure distribution in the model. The ceramic spherical particles failed to realize the uniform distribution of high pressure due to their high hardness and point contact characteristics, which caused damage to the CFRP patch. Compression equipment made of silicone rubber was able to achieve the required pressure level for curing the epoxy. Non-adhesion defects between the metal and the CFRP patch were confirmed in the area where the bending deformation occurred. This defect could be eliminated by optimizing the process conditions suitable for the newly developed flexible system.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.37-46
• /
• 2011

To design a beautiful hood fitting an unspecific individual, focusing on body parts such as the head, neck and shoulder requires body size and type information, which applied by physical factors like size, types, and movements, etc. These parts consist of complicated types and structures. Accurate information should be a priority due to great individual differences and low correlation with other body parts. However, there is not a lot of detailed physical information nor design methods for hood design. Therefore, the purpose of this study is to select a study sample "hood" which is a recently emerging fashion item and to expand the necessary physical information for pattern design and draw body size of wearing part on Hood like head, cerbical portion and shoulder. Extract factors to consist on types and after divided into several types, a study comparing each type's physical characteristics was conducted. In order to do that, body measurement data have been collected by statistical treatment and analyzed reference with statistical treatment. The results of the study are predicted to be important data to develop various hood designs for the recent fashion trend. Factor analysis was conducted through main composition analysis about direct measured item on human body and index items. The results of factor analysis, composed factors of body type in this research object were extracted in total of 3 factors. To categorize the head, neck and shoulders of women in their early 20s women and determine their characteristics, variances with factor analysis became operative for Cluster analysis. With these clusters, women in their early 20s were categorized into three types. The results of this study are considered to affect largely for higher physical suitability on unspecified individuals when allowed absence of reference and the fact that body size only limited to item 'head circumstance' in terms of making hat and hood in the case of recent Korea. For the future, an experimental study of hood production should be conducted by using basic data from this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.6
• /
• pp.24-33
• /
• 2009

The present study deals with the optimization of the leading edge shape around a wing-body junction to minimize the strength of the horseshoe vortex, which is one of the main factor generating the secondary flow losses. For this purpose, approximate optimization method is used for the optimization. The study is performed by using $FLUENT^{TM}$ and $iSIGHT^{TM}$. The total pressure coefficient for the optimized model was decreased about 9.79% compared with the baseline model.

• The Research Journal of the Costume Culture
• /
• v.8 no.6
• /
• pp.930-939
• /
• 2000

This study was done to provide the fundamental data for scientific and rational children's clothing sizing system by investigating their somatometric characteristics and classifying somatotypes. The subjects were 269 elementary schoolgirls aged from 7 to 8 years old living in Pusan and Kyungsangnam-do. Data from each girl comprises 28 anthropometic measurments and 4 photographic measurments, related to the lower half of body. To analyze somatotypes of the lower half of body, factor analysis, cluster analysis, discriminant analysis were performed for statistical analysis of the data. As to the analysis to draw somatometric factors by this age group, five factors which explain 76.85% of the whole variances were extracted. The first and second factors which explain more than 60% of the whole variances represent 'horizontal size'and 'vertical size', which characterize most aspects of the body shape of the subjects. On the basis of the cluster analysis, three different lower half of body types were categorized. Type Ⅰ has biggest horizontal size, average vertical size and most protruded belly. Type Ⅱ has average degree of horizontal size, quite big vertical size and most protruded hips. Type Ⅲ has smallest horizontal and vertical size. According to the analysis to discriminate somatotypes of the lower half of body of this age group, weight and waist circumference of discriminant function 1 and abdominal circumference of discriminant function 2 have coefficient values.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.35-43
• /
• 2012

In this study, underwater behaviors of negative buoyant body and positive buoyant body, which are ejected from a platform, are compared through eject test and simulation. CFD(Computational Fluid Dynamics) method is used to calculate the hydrodynamic derivatives of negative buoyant body with varied hull. Hydrodynamic derivatives that cannot be calculated with CFD are used with the same values of base shape. The pitch angles of test data are much bigger than those of simulated data, and the reason is supposed to be the trailing air effect. A more accurate simulation is possible via modified force modeling which reflects this phenomenon. The underwater behaviors of positive buoyant body and negative buoyant body are somewhat different with each other at the same eject condition, but it may not be a problem in the view of operation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.1
• /
• pp.51-64
• /
• 2019

This study provides basic information for the convenient size selection of shirts in the online purchasing environment. The preferred shirt fit was compared according to body size group. The subjects were 111 students majoring in clothing. After setting a virtual model with her own body sizes, subjects chose the best preferred fit among four sizes shirts which included the shirt suitable to her bust circumference, one size smaller shirt, one size larger shirt, and a two size larger shirt. They generally preferred the original size, but the preferred shirt fit was different by the body characteristics such as stature, waist height, or the ratio of Biacromion and drop. Shirt length was affected by stature and sleeve length was affected by waist height. The shoulder ease was mostly affected by the ratio of the shoulder length. Waist fit and hip fit were influenced by waist and hip. Therefore, the body parts affecting the preferred fit of each shirt part were different and the effect of body shape was stronger than body size.

• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.615-625
• /
• 2023

This study aimed to analyze the characteristics of the lower-body shape of middle-aged males with abdominal obesity by type and consider dimensional distribution to present a suit-pants size. The criteria were having a waist circumference greater than 90 cm and a waist-to-hip ratio(WHR) greater than 0.90; a total of 566 middle-aged males were surveyed. The findings revealed that, first, compared to standard lower-body types, the average body size of abdomenobese middle-aged males was significantly larger, especially in the horizontal area than in the vertical ares. Second, through a cluster analysis, a total of three categories of abdominal obesity were defined: small oval, large cylinder, and trapezoid type. The coverage rates of each type were 93.8%, 75.9%, and 93.0%, respectively. Finally, the suit-pants size system established according to lower-body types indicated the basic body size and reference body size were different for each type and also for the KS K 0050 male adult's garments size system. According to the definition of abdominal obesity, the types of abdominal obesity and the dimensions of each area are different, even if they belong to the same obesity group, suggesting that it is necessary to develop a pattern based on the analysis of obesity types.

• Journal of the Korean Society of Visualization
• /
• v.18 no.2
• /
• pp.39-45
• /
• 2020

Problems related with flows around structures are typical in various engineering fields. The characteristics of these flow structures depend strongly on the shape of the body. The flow regime around square cylinders which are also employed in various applications has also been investigated. In addition to a single body, flows past closely spaced structures arranged in tandem are observed in numerous practical applications. In this study, the flow characteristics around the circular and the square cylinder were investigated according to S/D. The velocity fields and Reynolds stress of the single cylinders were acquired to explain the flow behaviors between tandem cylinders. The differences observed in the flow behaviors of square and circular cylinders were studied. The flow patterns around two tandem cylinders can be classified into three types of wake interference behaviors according to S/D. This is related with the flows between cylinders.

• The Research Journal of the Costume Culture
• /
• v.7 no.1
• /
• pp.154-164
• /
• 1999

The purpose of this study is to provide total information for elderly women\`s clothing construction by classifying and analyzing the characteristics of their lower body types. Three hundred three subjects, between the ages of 60 and 82, were chosen. The data were collected from 37 anthropometric measurements of each subject and analyzed by the multivariate method. Through the factor analysis of principal component model, eight factors were extracted from anthropometric measurements. The most important factors were obesity, vertical size, and shape of below waistline to hip. The subjects were classified into 5 types according to cluster analysis by Ward\`s minimum variance method. The dominent types were type 1, 2. The chracteristics of type 1 are average height and sized tyoes, a greater difference between hip and waist. The charateristics of type 2 are shorter height and comparatively fat types, fatness of the waist and abdomen.