• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of Chest Surgery
• /
• v.39 no.2 s.259
• /
• pp.127-133
• /
• 2006

Background: In the studies of the distribution of time to death in trauma patients, the early deaths within several hours after injury were a large component of total trauma deaths. Due to the development of trauma system, overall mortality of trauma was decreased, but trauma is still the major cause of deaths. Material and Method: From January 1994 to December 2003, trauma patients who had been admitted and had expired at tertiary hospital were enrolled. There was a total of 400 cases, a retrospective study was done to determine the distribution of trauma mortality according to the part of the body that were severely injured part and compared the difference between early deaths within 6 hours and late deaths after 6 hours. We also analysed the risk factors of early deaths due to trauma. Result: In severe injury to the head and abdomen, the distribution of mortality was bimodal. But, in severe chest injuries, the distribution was log-shape and most early deaths were almost of trauma related. The average of GCS were 5.86$\pm$4.15 for the early deaths and 8.24$\pm$5.02 for the late deaths (p < 0.05). The AIS of thorax were 2.66$\pm$1.87 for the early deaths and 1.55$\pm$1.76 for late deaths. The risk factors for early mortality were non-EMS transportation (odds ratio 3.474), high AIS (odds ratio 1.491) and GCS (odds ratio 0.859). Conclusion: In trauma patients, the causes of early mortality were severe brain injury and massive hemorrhage. Also severe chest injuries were the major cause of the early deaths in truama. Early diagnosis of chest injury can frequently be missed in the acute trauma setting. Therefore, high index of suspicion, a careful examination, and aggressive surgical treatment are important in multiple trauma patients.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.228-232
• /
• 2006

Purpose: electrophilic $^{18}F(T_{1/2}=110\;min)$ radionuclide in the form of $[^{18}F]F_2$ gas is of great significance for labeling radiopharmaceuticals for positron omission tomography (PET). However, its production In high yield and with high specific radioactivity is still a challenge to overcome several problems on targetry. The aim of the present study was to develop a method suitable for the routine production of $[^{18}F]F_2$ for the electrophilic substitution reaction. Materials and Methods: The target was designed water-cooled aluminum target chamber system with a conical bore shape. Production of the elemental fluorine was carried out via the $^{18}O(p,n)^{18}F$ reaction using a two-step irradiation protocol. In the first irradiation, the target filled with highly enriched $^{18}O_2$ was irradiated with protons for $^{18}F$ production, which were adsorbed on the inner surface of target body. In the second irradiation, the mixed gas ($1%[^{19}F]F_2/Ar$) was leaded into the target chamber, fellowing a short irradiation of proton for isotopic exchange between the carrier-fluorine and the radiofluorine absorbed in the target chamber. Optimization of production was performed as the function of irradiation time, the beam current and $^{18}O_2$ loading pressure. Results: Production runs was performed under the following optimum conditions: The 1st irradiation for the nuclear reaction (15.0 bar of 97% enriched $^{18}O_2$, 13.2 MeV protons, 30 ${\mu}A$, 60-90 min irradiation), the recovery of enriched oxygen via cryogenic pumping; The 2nd irradiation for the recovery of absorbed radiofluorine (12.0 bar of 1% $[^{19}F]fluorine/argon$ gas, 13.2 MeV protons, 30 ${\mu}A$, 20-30 min irradiation) the recovery of $[^{18}F]fluorine$ for synthesis. The yield of $[^{18}F]fluorine$ at EOB (end of bombardment) was achieved around $34{\pm}6.0$ GBq (n>10). Conclusion: The production of $^{18}F$ electrophilic agent via $^{18}O(p,n)^{18}F$ reaction was much under investigation. Especially, an aluminum gas target was very advantageous for routine production of $[^{18}F]fluorine$. These results suggest the possibility to use $[^{18}F]F_2$ gas as a electrophilic substitution agent.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.41-51
• /
• 2014

Cauliflower mushroom widely known high concent of ${\beta}$-glucan for farm cultivation invigoration verified characteristics of mycelia growth, genetic diversity, resistance to Trichoderma by replacement culture with Trichoderma and growth characteristics of new variety crossbleeding strain. The result of replacement culture with Trichoderma for verification resistance about Trichoderma, 6951 (T. viride) strain did not show special change after formation of confrontation line and 6952 (T. spp.) strain was showed more formation of spore after formation of confrontation line. But 6426 (T. harzianum) strain found to encroach part of growth area of cauliflower mushroom mycelia. Among 10 kinds cauliflower mushroom strain, JF02-06 strain collected by Gurye, found did not spore of Trichoderma and thought to be resistant to Trichoderma. The result of crossbleeding after selected that mother strain good growth and formation of fruit body, verified good mycelia growth at JF02-47, 49 and 50 strain in Korean pine of wood-chip media. The result of gene sequence about ITS1, 5.8S and ITS4 for analysis of genetic diversity at crossbleeding strain, found high significance to other cauliflower mushroom in registered Genebank. The result of growth characteristic of spore and mycelia of cauliflower mushroom by observation microscope, size of spore showed water drop shape to major axis $6{\mu}m$ and minor axis $5{\mu}m$ and clamp showed 3 types in mycelia. The wide of mycelia was $3{\mu}m$. The characteristic of mycelia of cauliflower mushroom found to grow mycelia in clamp at approximately 50%. The growth speed of mycelia was $0.507{\mu}m/min$ and 2nd mycelia grown similar speed to mother mycelia at parallel with mother mycelia after growth speed at $0.082{\mu}m/min$. The formation of clamp made small clamp for 5 hours after shown transfer of electrolyte in mycelia inside. The septum formation started after 3 hours and then finally completed after 2 hours. In this study, strain of cauliflower mushroom verified resistance of Trichoderma, genetic diversity and characteristic of mycelia growth. Therefore, basic knowledge of cauliflower mushroom will improve and further contribute to development of mushroom industry.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.197-204
• /
• 2019

In this study, smart farm technology was used by farmers cultivating 'CHIKUMASSHU T-011' in order to develop an optimal growth model for the precision cultivation of bottle-grown winter mushroom and the results of the same are mentioned herein. Farmers participating in the experiment used 60 ㎡ of bed area with 4 rows and 13 columns of shelf shape, 20 horsepower refrigerator, 100T of sandwich panel for insulation, 6 ultrasonic humidifiers, 12 kW of heating, and 20,000 bottles of Flammulina velutipes mushroom spores. The temperature, humidity, and carbon dioxide concentrations, which directly affect the growth of the mushroom, were collected and analyzed from the environmental sensors installed at the winter mushroom cultivation area. The initial temperature was found to be 14.5℃, which was maintained at 14℃ to 15℃ until the 10th day. In the restriction phase, the initial temperature was 4℃ and was maintained between 2℃ and 3℃ until the 15th day, while during the growth phase, it was maintained between 7.5℃ to 9.5℃. Analysis of the humidity data revealed initial humidity to be 100%, which varied between 88% to 98% during primordia formation period. The humidity remained between 77% to 96% until the 15th day, in the restriction phase and between 75% to 83% during the growth phase. The initial carbon dioxide concentration was 3,500 ppm and varied between 3,500 ppm to 6,000 ppm during primordia formation period and was maintained at 6,000 ppm until the 15th day. During the growth phase, the carbon dioxide concentration was found to be over 6,000 ppm. Fruiting body characteristics of 'CHIKUMASSHU T-011' cultivated in the farmhouse were as follows: Pileus diameter of 7.5 mm and thickness of 4.1 mm, stipe thickness of 3.3 mm, and length of 154.2 mm. The number of valid fruiting bodies was 1,048 unit per 1,400 mL bottle, and the individual weight was 0.71 g per unit. The yield of fruiting bodies was 402.8 g per 1,400 mL bottle.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.625-639
• /
• 2019

Microplastics are one of the substances threatening the marine ecosystem. Here, we summarize the status of research on the effect of microplastics on marine life and suggest future research directions. Microplastics are synthetic polymeric compounds smaller than 5 mm and these materials released into the environment are not only physically small but do not decompose over time. Thus, they accumulate extensively on land, from the coast to the sea, and from the surface to the deep sea. Microplastic can be ingested and accumulated in marine life. Furthermore, the elution of chemicals added to plastic represents another risk. Microplastics accumulated in the ocean affect the growth, development, behavior, reproduction, and death of marine life. However, the properties of microplastics vary widely in size, material, shape, and other aspects and toxicity tests conducted on several properties of microplastics cannot represent the hazards of all other microplastics. It is necessary to evaluate the risks according to the types of microplastic, but due to their variety and the lack of uniformity in research results, it is difficult to compare and analyze the results of previous studies. Therefore, it is necessary to derive a standard test method to estimate the biological risk from different types of microplastics. In addition, while most of the previous studies were conducted mostly on spheres for the convenience of the experiments, they do not properly reflect the reality that fibers and fragments are the main forms of microplastics in the marine environment and in fish and shellfish. Furthermore, studies have been conducted on additives and POPs (persistent organic pollutants) in plastics, but little is known about their toxic effects on the body. The effects of microplastics on the marine ecosystems and humans could be identified in more detail if standard testing methods are developed, microplastics in the form of fibers and fragments rather than spheres are tested, and additives and POPs are analyzed. These investigations will allow us to identify the impact of microplastics on marine ecosystems and humans in more detail.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.404-417
• /
• 2017

In this study, we analyzed response patterns of rotifer community to eutrophic state, and estimated the applicability of rotifer community as an environmental indicator for highly eutrophicated reservoirs. In order to evaluate the relationships among spatial and temporal distributions and the water quality of rotifer community, we selected the Jundae Reservoir and Chodae Reservoir in Chungcheongnam-do, Korea, which are geographically adjacent but have different water quality, particularly in their eutrophic states. For the analyses on their correlations, monthly survey of water quality and rotifer community, was conducted from April to November 2013 in both reservoirs. The rotifer community was divided into different compositions of functional groups as well as species. Functional groups were classified according to the structure and shape of trophi which can represent feeding behavior of rotifer genus. To reflect ecological characteristics of species, body size and habitat preferences were also considered. Species-based composition did not show a consistent tendency with water quality parameters related with eutrophication. On the contrary, functional group composition showed relatively clear group-specific patterns, increasing or decreasing according to the parameters. The results suggest the possible application of rotifer functional group composition as an indicatorforthe lentic systems, especially hyper-eutrophicated reservoirs. The present study can suggest the applicability based on the field observations from the limited time scale and sites, and further studies on feeding behavior of the rotifer functional group and its interactions with environmental variables are necessary for the further application.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.73-82
• /
• 2005

This study was conducted, based on the field survey and laboratory observations, to elucidate egg developmental processes and their characteristics of the Korean slender gudgeon, Squalidus gracilis majimae. For the experiments, the mature adults were collected at the Woongcheon-Cheon Stream and Boreung Reservoir located in Boreung City, Chungnam Province and eggs were obtained from the natural spawning area. Morphological characteristics of the egg and embryonic development were summarized as follows: The shape of the fertilized egg was spherical, adhesive and transparent. The fertilized egg was 2.9${\pm}$0.3 mm (n = 30) in mean diameter under water temperature of $26{\pm}1.5^{\circ}C$, light white in color and had no oil droplets. After 20 minutes from the time of fertilization, a blastodisc was formed and divided into two cells at 48 minutes after fertilization. The blastular stage occurred at 5 hours 40 minutes after fertilization and the gastrular stage was detected at 8 hours 41 minutes after fertilization. The beginning of embryo formation was observed at 12 hours 58 minutes after fertilization and optic vesicles and 9 somites were discovered at 17 hours 05 minutes after fertilization. Differentiation of brains and embryo wiggling were observed at 37 hours 27 minutes after fertilization. Heart beating and the formation of melanophores in optic vesicles were detected at 44 hours 46 minutes after fertilization. The formation of pectoral fins and melanophores in the body were discovered at 50 hours 36 minutes after fertilization. Hatching occurred at 57 hours 49 minutes after fertilization. The newly hatched larvae were 3.3${\pm}$0.2 mm (n = 120) in total length. We believe that these results may contribute the species and population conservations under the situation of accelerated water pollution and the decreases of its diversity.

• Applied Microscopy
• /
• v.18 no.1
• /
• pp.1-20
• /
• 1988

There's been arguments on the different morphological status between the nucleus accumbens septi and nucleus fundus striati of ventral striatum. Authors carried out the comparative study on the neuronal cell types of these nuclei, in the chick and the rat. Results are summarized as follows: In the nucleus accumbens septi of the chick, there found 3 main cell types. Type I cells are oval or spindle-shaped. They are the most abundant cell types, comprising more than 80% of neurons. The pale nucleus is usually indented. The cytoplasm is also pale and contains small amount of mitochondria, rough r-ER and Golgi complexes. This cell has a few symmetric synapses on the cell membrane. Type II cells are pale large cells. They are polygonal or irregularly-shaped. They contain pale spherical nucleus, and the pale cytoplasm with relatively large amount of mitochondria, free ribosomes and well-developed Golgi complexes. Some axo-somatic synapes are found on the cell. Type III cells are oval or spherical-shaped. The nucleus is relatively pale and large, In the dense cytoplasm, well developed. r-ER formed typical Nissl's body, and there found many mitochondria, ribosomes and lysosomes. In the chick fundus striati nucleus, there also found 3 main cell types. Type I cells are small and spindle-shaped. This type is the most abundant one and constitutes more the 80% of the neurons. Morphological features other than it's shape, is generally similar with that of Type I cell in the nucleus accumbens. Type II cells are irregularly shaped large cells. Dense cytoplasm contains large amount of cell organelles. Some axo-somatic synapses are found. Type III cells are small dense cells. This oval cell contains the oval nucleus, and the plentiful cytoplasm with well developed r-ER, ribosomes and mitochondria. In the nucleus accumbens septi of the rat, there found 4 main cell types. Type I cells are small, oval or spherical cells, comprising more than 90% of all the neurons. Spherical nucleus shows typical chromatin rim along the nuclear membrane. Dense cytoplasm contains many ribosomes and mitochondria. Type II cells are large oval cells. The eccentric nucleus is deeply invaginated. Pale cytoplasm contains large amount of ribosomes, Golgi complexes, mitochondria, and dense bodies. Type III cells are pale, large, oval cells. They contain moderate amount of ribosomes and mitochondria, and some scattered stacks of r-ER. Type IV cells are small pale cells. Small oval nucleus is indented and shows chromatin rim. Only small amount of ribosomes and mitochondria can be found. In the nucleus fundus striati of the rat, there also found 4 main cell types. Type I cells are spherical or oval cells, comprising more than 90% of the neurons. The chromatin rim of the spherical nucleus is not so prominent as compared to the rim of type I cell in the nucleus accumbens septi. The cytoplasm contains moderate amount of mitochondria, ribosomes and some scattered r-ER. A few axo-somatic synapses were found. Type II cells are small round or polygonal cells. Golgi complexes are especially well-developed in this cell type. The cytoplasm also contains moderate amount of mitochondria, ribosomes, and dense bodies. Type III cells are small cells. The large nucleus shows prominent chromatin rim. The cytoplasm contains many ribosomes and mitochondria. Type IV cells are large, spheircal or oval cells. The nucleus is deeply indented. The plentiful cytoplasm contains large amount of ribosomes, mitochondria, Golgi complexes, neurotubules, but not r-ER. In the present study, it is clear that the nucleus accumbens septi and the nucleus fundus striati are independant cell groups, according to their cytoarchitectonics and the ultrastructural features of their cell types.

• The Journal of Dong Guk Oriental Medicine
• /
• v.8 no.2
• /
• pp.131-154
• /
• 2000

Nan Jing(Difficult Classic), as a catechism, describes in detail and deeply the ideas in Nei Jing(Huangdi's Internal Classic). The description of Nan Jing is focused on basic theories including theories about some disease and is excellent in identification and analysis. The contents of Nan Jing are as follows: 1-23 Nan-pulse and pulse condition, 24~29 Nan-channels and collaterals, 30~47 Nan-viscera and bowels(Zang Fu organs), 48~61 Nan-disease, 62~68 Nan-acupuncture points, 69~91 Nan-acupuncture. Especially, diagnosis techniques in Nan Jing make 'Only method of cunkou pulse taking' that is a technique for feeling the pulse widely applied in these days in Oriental medicine clear. Thus, this book adjusts the theory of pulse and pulse condition given in 1~23 Nan of 'The Study of Nan Jing' in order to enhance an understanding about the theory of pulse and pulse condition. The text of 1~23 Nan about pulse lore centers on all pulse of human body interconnected each other and cunkou, both ends of the pulse, and contrasts regular pulse with irregular pulse. 1. 10 Nan describes the theory about five kinds of evils and hardness and softness, and unique pulse condition of each bowels. 2. 13 Nan explains that the relative difficulty of medical treatment is determined by the degree of balance or unbalance among three factors-colors, pulse and pulse condition, flesh shape. 3. 14 Nan divides pulse and pulse condition into slow pulse and rapid pulse, and explains separately abnormality, great loss of semen, death caused by slow pulse, and abnormality, great loss of semen, death caused by rapid pulse. 4. 15 Nan about taut pulse(弦), full pulse(鉤), floating pulse(毛), deep pulse(石脈) describes that pulse and pulse condition differs according to four seasons. Therefore, Nan Jing establishes clearly techniques of feeling the pulse in 'Only method of cunkou pulse taking(獨取寸口)' and advances the theory of Nei Jing. Futhermore, Nan Jing is more valuable in that it suggests unique theory different with Nei Jing.