• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.9-18
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount of the chaange of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone. 2) As for the change of the standard line according to the movement, we found that the waist line, the center front line, the center back line, the bust width line, the upper back width line and the back width line became longer. Special consideration must be given to the function of the clothing for an abnormal type of figure. 3) The difference of the measurements between the cubic cutting and the body measurement regardless of the body movement is due to a gap by an acute angle at the jutted place between the developed pattern and the body surface. We found that the body measurement of the upper back width line, the back width line and the bust line became larger. Consequently, in making an original clothing pattern, it is desirable that we must not place the front and the back waist darts at the jutted place on the back from the functional and the aesthetic viewpoint of clothing. It is also desirable that we must widen the neckhole because the shoulder angle is close to a straight line due to a jut of the upper back width line.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.4
• /
• pp.5-13
• /
• 1992

The vibration of a vehicle, which is caused by and transmitted from the engine, has significant effect on the ride comfort and the dynamic characteristics of the engine mount system has direct influence on the vibration and noise of the vehicle. This paper examines the body shake caused by the engine excitation force on engine key-off of a jeep by experiment and computer simulation using a general purpose mechanical system program, DADS. The computer simulation model consists of the engine, body including frame, and front and rear axles and each axle has right and left tires. The force element between body and suspension is modeled as a combination of suspension spring and damper, and the unsprung mass has roll and pitch motion. The body shake obtained from experiment was compared with the result of computer simulation. Parametric study of the body shake on engine key-off is performed with changing the stiffness of engine mount rubber, the engine mount installation angle and position of engine mounts by using the verified computer simulation model.

• The Journal of Korean Physical Therapy
• /
• v.6 no.1
• /
• pp.23-35
• /
• 1994

In this research, the mentally-handicapped children being able to be trained were investigated the actual condition of train function making 40 mentally-handicapped children in Kummi Hyedang Spacial Education School, to exmine the effect of physical exercise function when training the mentally-handicapped children who can be trained as applying exercise education programs, and trains for 10 weeks by assigning to both experiment group and control group according to children who are similar to training functions from pre-examination. The results are in following: First, the results of test in the exercise ability of mentally-handicapped children with the degree of being able to trained are very delayed in comparison with normal mental children through the both top and bottom examination. The developments of 5 exercise functions classified by domain, have the order of eyesight exercise, softness, physical strength, quickness, parallelism, the interaction of both eye and hand, and, have the exercise function being equal to the level of between 6 and 12 years old. In 13 bottom test, throwing bean-bag is equal to the nomal 12 years old boy. the board jump, sitting position / bending forward / closing are equal to the level of 12 years old boy. standing with only leg is the level of 9 years old, threading pearls is 7 years old, transfering the wood building, picking the upper body up, walking board, balancing one leg with opened, eye, fist / opening palm / palm, bending and opening arm with postrating on chair, are the exercise functions of below 6 years old. Second, there are great effects in carrying out the exercise education program to the mentally-handicapped children with the level of being able to trained. In experiment group, it is elevated to the middle level of 12 years old nomal children. Classified by domain of test the board jump, training, the bean-bag are far higher level than 12 years old normal children, and are elevated the level of 11 years old boy. Balancing only leg with closed eye is below the level of 10 years old boys, fist / opening palm / palm are the level of 9 years old boys. There and back running, picking the upper body is the level of 9 years old girls. Walking board is the level of 8 years old boys. Bending and opening arm with postrating on chair is the level of 7 rears old boy. Balancing one leg with opened eye is elevated to the level of f years old girls. These functions have the more balanced exercise function rather than pre-examination. In control group, they have little change by classified the bottom test, but have the exercise function on the time of pre-examination, go backward in physical strength. quickness. Third, the exercise function being learned by exercise education program on the mentally-handicapped children of the level with being able to train is appeared to maintain continuately. Softness, physical strength, quickness, eyesight training are maintained the learned exercise function, the interaction of both eye and hands, parallelism are delayed a little. Classified by the bottom test. threading pearls, transfering the wood building, throwing the bean-bag, sitting position / rolling forward / reaching, the broad jump and picking upper body up, there and bark running, picking upper body up, balancing with only leg as opened eye, bending and opening arm with postrating on chair, etc. are maintained. Fist / opening palm / palm, balancing with only leg as opened eye are delayed a little. The change of body position is elevated. Seeing these results, it is appeared to the mentally-handicapped children that the exercise education programs, which is suitable their actual condition and acomplishes in voluntary participation, have very positive effect. So, to develop the function of body exercise in mentally-handicapped children with the level of being to able to be trained, the measures must be groped so that the exercise education programs can be practiced positively, and the ,body exercise can be experienced more.

• Journal of the Korean Home Economics Association
• /
• v.28 no.1
• /
• pp.1-7
• /
• 1990

This study was carried out to investigate the influence of the various physiological function caused by girdle wearing. The four experimental methods used in this study are as follows. For example, the Reentgen photographing, body measurement by Sliding Gauge, mensurement of the electrocardiogram, measurement of the pulse and the blood pressure. The results of the investigation were as follows; 1. In the change of the various organs by Roentgen photographing, the diaphragm rised a little than normal position. The heart and stomach inclined to right side and the shape of stomach and duodenum are longer than the length of normal shape. Especially the phlorus of stomach was pressured strongly. 2. In the experimental change by the Sliding gauge and body measurement, the waist, hip and theigh girth of wearing-girdle reduced than at the no-girdle. The protruson of abdomen and hip section of wearing-girdle and the phenomenon of Hip-Up showed. 3. The difference by measurement of the electrocardiogram wasn't showed. The pulse of the wearing-girdle was increased slightly than the no-girdle. 4. The blood pressure of the wearing-girdle decreased slightly than the no-girdle.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.586-588
• /
• 2004

Although stable control algorithm has been implemented to the biped robot, the stability is not guaranteed because of encoder errors and/or rigid body elastics. Hence precise body pose estimation is required for more natural and long term walk. Specially pelvis sloping by gravity or uneven ground on landing place are most critical reason for undulated motion. In order to overcome these difficulties an estimation system for foot position and orientation using PSD sensors and Gyro sensors is proposed along with calibration algorithm and experimental verification.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.19-26
• /
• 1997

The manufacture of an impeller typically requires the 5-axis CNC machining, since the impeller is usually under working conditions such as high speed, high temperature, and high pressure. Thus, this study contributes to development of an exclusive CAM system for effective 5-axis CNC machining of a ruled surface type impeller. In this study, the sampled impeller is made of blades and a body and the blade consists of ruled surfaces between hub curve and shroud curve. In the post processing for 5-axis NC part program, the cutter axis direction vector is the straighten vector on ruled surface. The position of ball center in ball end mill cutter is decided on the interference check between the cutter and body surface of impeller using with the modified z-map method that z-axis is the same of cutter axis direction vector. The exclusive CAM system for an impeller developed in this study was very effective for designs and 50-axis machining of a ruled surface type impeller.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.81-89
• /
• 2005

A chair is a necessary tool in modern life and people spend a lot of time on it. But there Ere so many chairs which the human body size Is not considered that many users usually feel fatigue. The purpose of this study is to analyze the fundamental items human factors engineering which have to be applied to chairs and then to make user choose chairs, considering them as an index. The extent of this study is limited to chairs for office work used for sitting for a long time to work. We also profoundly analyze functional matters of chairs, user's posture and so on. We'll present all suitable factors and the assumed tentative plan by inferring items', the function chairs have coincides with the human body.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.137-145
• /
• 2002

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. a lightweight vehicle body is salutary to save operating costs and fuel consumption. Therefore this study is to perform the size and the shape optimization of crossbeam for electric vehicle using the method of topology optimization to introduce the concept of homogenization based on optimality criteria method which is efficient for the problem having the number of design variables and a few boundary condition. this provides the method to determine the optimum position and shape of circular hole in the cross beam and then can achieve the optimal design to reduce weight.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.705-710
• /
• 1998

We describe a multigrid wavelet-based natural pixel (WNP) method for image reconstruction in emission computed tomography (ECT). The ECT is used to identify the tagged radioactive material's position in the body for detection of abnormal tissue such as tumor or cancer, as in SPECT and PET. With ECT methodology in parallel beam mode, we formulate a matrix-based reconstruction method for radionuclide sources in the human body. The resulting matrix for a practical problem is very large and nearly singular. To overcome this ill-conditioning, wavelet transform is considered in this study. Wavelets have inherent de-noising and multiscale resolution properties. Therefore, the multigrid wavelet-based natural pixel (WNP) method is very efficient to reconstruct image from projection data that is noisy and incomplete. We test this multigrid wavelet natural pixel (WNP) reconstruction method with the MCNP generated projection data for diagnosis of the simulated cancerous tumor.