• Korean Journal of Medicinal Crop Science
• /
• v.18 no.1
• /
• pp.51-55
• /
• 2010

This study was conducted to investigate the effect of planting position on the growth characteristics, yield and ginsenoside content in Panax ginseng C.A. Meyer at different growth stages. Referring to shoot growth characteristics, stem length, stem diameter and leave area were higher at front than rear, increasing as the proceeding of growth stages. But a lower chlorophyll contents was caused at front compared to rear and decreased as the proceeding of growth stages contrarily. According to root characteristics, root length and main body length were higher at front, with a positive correlation to growth stages, which was also shown on fresh root weight and dry root weight with the maximum in August. Meanwhile, the effect of planting position on ginsenoside content could also be definite by the highest content at front showing high light intensity, increasing as the proceeding of growth stages as well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.5112-5128
• /
• 2016

Tracking human body is an important problem in computer vision field. Tracking failures caused by occlusion can lead to wrong rectification of the target position. In this paper, a robust human tracking algorithm is proposed to address the problem of occlusion, rotation and improve the tracking accuracy. It is based on Tracking-Learning-Detection framework. The key auxiliary information is used in the framework which motivated by the fact that a tracking target is usually embedded in the context that provides useful information. First, face localization method is utilized to find key face location information. Second, the relative position relationship is established between the auxiliary information and the target location. With the relevant model, the key face information will get the current target position when a target has disappeared. Thus, the target can be stably tracked even when it is partially or fully occluded. Experiments are conducted in various challenging videos. In conjunction with online update, the results demonstrate that the proposed method outperforms the traditional TLD algorithm, and it has a relatively better tracking performance than other state-of-the-art methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1350-1353
• /
• 2015

In this paper, we have researched about how to detect the fish robot objects in aquarium. We had used designed fish robots DOMI ver1.0, which had researched and developed for aquarium underwater robot. The model of the robot fish is analysis to maximize the momentum of the robot fish and the body of the robot is designed through the analysis of the biological fish swimming. We are planned to non-external equipment to find the position and manipulated the position using creating boundary to fish robot to detect the fish robot objects. Also, we focused the detecting fish robot in aquarium by using boundary algorithm. In order to the find the object boundary, it is filtering the video frame to picture frames and changing the RGB to gray. Then, applied the boundary algorithm stand of equations which operates the boundary for objects. We called these procedures is kind of image processing that can distinguish the objects and background in the captured video frames. It was confirmed that excellent performance in the field test such as filtering image, object detecting and boundary algorithm.

• Journal of Fashion Business
• /
• v.26 no.2
• /
• pp.83-94
• /
• 2022

The purpose of this study was to analyze the reality of clothes-wearing among physically disabled women and propose trouser designs. As a research method, an in-depth interview method was adopted for 10 women in their 30s and 50s with lower limb disabilities who could wear trousers and use wheelchairs. The study results identified the following factors that should be considered in the design of trousers. First, a semi-casual design that could hide physical deficiencies, was not different from ready-made clothes and enabled various looks was desirable. Second, the proper material would have little transformation in the form, have remarkable durability and laundry fastness, two-directional stretch, and hide deficiencies with a sense of thickness and density. Third, an "L-frame" pattern in a sitting position, and a straight fit were desirable. Finally, pockets can impose pressure according to their form, size, position, and sewing method, highlighted the need for a sewing approach to minimize seams in the fabric. For adjustment, an elastic band would be a good choice in terms of type, length, position, and material as it could satisfy both the convenience of putting on and taking off and comfort in wearing at the same time. Decorative design details can also impose pressure according to a sense of thickness, which means that they should be avoided in parts that are close to the body or can impose pressure according to posture.

• Geomechanics and Engineering
• /
• v.36 no.1
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• Biomolecules & Therapeutics
• /
• v.11 no.2
• /
• pp.109-111
• /
• 2003

The single oral toxicity of Jeju citrus rind pectin (Jeju pectin) was studied in Spraque-Dawley rats of both sexes. In this study, rats were administrated orally with dosages of 100, 250 and 500 mg/kg of Jeju pectin. We daily examined number of deaths, clinical signs, body weights and gross findings for 14 days after Jeju pectin administration. When we administered different doses of 100, 250 and 500 mg/kg. We found no rats died in both sex after administration. Some clinical signs (decrease locomotor activity, salivation, soft stool, prone position, lacrimation, crouching position, convulsion, ataxic gait, incontinence of mine) were also observed during the experimental period.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.91-97
• /
• 2005

Bones are dynamic structures, being supported by muscles, tendons, and ligaments. When some or all the structures are disturbed i.e. in fractures, the alignment of the bone in respect to the rest of the body is deranged. This gives rise to axial as well as rotational deformity in three dimensional planes. The correct alignment and position of the long bones are to be maintained to heal the bone in the best possible anatomical and functional position. The objective of this research is to address the problems in the current practice involving surgeon, assistant, fluoroscopy and crude mechanical means and to see if a robotic solution exists to solve the problems of manipulating and reducing long bone fractures. This paper presents various design aspects of the proposed surgeon-instructed, image-guided and robotic system including the system design specification, robot design and analysis, motion control and implementation, and x-ray image processing and incorporation in CAD environment.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.32-34
• /
• 1994

An automatic multiframe procedure for tracking signalized points on multiple, differently moving discontinuous surface is described. The position of markers which attached on human body give us some important information such as velocity, acceleration, angular velocity and angular acceleration, etc, of the rigid objects. Generally, the detected objects occufying some area in images rather than a point because of the generic size of the marks or the smeared effects of the camera. To solve the problem we used a modified clustering algorithm.

• The Journal of Korea Robotics Society
• /
• v.9 no.4
• /
• pp.250-257
• /
• 2014

In this paper, a new mobile robot, so called a rollerbot, is presented, which has single body and rugby-ball shaped roller wheel. A rollerbot has single point contact on ground and low energy consumption in motion because of the reduced friction. By changing center of mass using a balancing weight, a rollerbot is able to get steering force. The vertical position of mass center of the rollerbot in this paper is designed to lie inside radius of the roller wheel, so that to have stable equilibrium position. Thus, the posture and the steering control of the rollerbot can be easily done by changing the center of mass. Kinematics of the rollerbot is derived by transformation of differential motion in this paper.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.227-230
• /
• 2005

A specific anthropomorphic mannequin (SAM) model was used to investigate the relation between local specific absorption rate (SAR) and head size. The model was scaled to 80 to 100% sized models at intervals of 5%. We assumed that the shell of the SAM model has the same properties as the head-equivalent tissue. Five handsets with a monopole antenna operating at 835 MHz were placed in the approximate cheek position against the scaled SAM models. The handsets had different antenna lengths, antenna positions, body sizes, and external materials. SAR distributions in the scaled SAM models were computed using the finite-difference time-domain method. We found that a larger head causes a distinct increase in the spatial peak 1-voxel SAR, while head size did not significantly change the peak 1-g averaged-SAR and 10-g averaged-SAR values for the same power level delivered to the antenna.