• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.33-38
• /
• 2008

Purpose: The Gated cardiac blood pool scan is non-invasive method that a quantitative evaluation of left ventricular function. Also this scan have shown the value of radionuclide ejection fraction measurements during the course of chemotherapy as a predictor of cardiac toxicity. Therefore a reliable method of monitoring its cardiotoxic effects is necessary. the purpose of this study is to minimize the overestimate of left ventricular ejection fraction (LVEF) by modified body position to reduce the influence of scattered rays from surrounding organs of the heart in the background region of interest. Materials and Methods: Gated cardiac blood pool scan using in vivo $^{99m}Tc$-red blood cell (RBC) was carried out in 20 patients (mean $44.8{\pm}8.6$ yr) with chemotherapy for a breast carcinoma. Data acquisition requires about 600 seconds and 24 frames of one heart cycle by the multigated acquisition mode, Synchronization deteriorates toward the end of the cycle and with the distance from the trigger signal (R-wave) by ECG gating. Gated cardiac blood pool scan was studied with conventional method (supine position and the detector head in $30-45^{\circ}$ left anterior oblique position and caudal $10-20^{\circ}$ tilt) and compared with modified method (left lateral flexion position with 360 mL of drinking water). LVEF analysis was performed by using the automatically computer mode. Results: The ROI counts of modified scan method were lower than LV conventional method ($1429{\pm}251$ versus $1853{\pm}243$, <0.01). And LVEF of modified method was also decrease compared with conventional method ($58.3{\pm}5.6%$ versus $65.3{\pm}6.1%$, <0.01). Imaging analysis indicated that stomach was expanded because of water and spleen position was changed to lateral inferior compared with conventional method. Conclusion: This study shows that the modified method in MUGA reduce the influence of scattered rays from surrounding organs. Because after change the body position to left lateral flexion and drinking water, the location of spleen, left lobe of liver and stomach had changed and they could escaped from background ROI. Therefore, modified method could help to minimize the overestimate LVEF (%).

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.125-126
• /
• 1998

Pulse conduction velocity is determined by areterial compliance, which is changed by lateral pressure of arterial wall. Hydrostatic pressure of the limb vessel is changed by body position, especially in elevated arm. The arterial pulse in the finger causes the blood volume to change, changing the optical density of the blood. Photoplethysmograph of index finger was obtained by LED and phototransistor. Pulse transmission time(PTT) was measured by the interval between the peak of ECG R wave and the peak of the finger plethysmogram. PTT was increased by upward position of arm, and decreased by downward position of the arm compared to horizontal position. This result suggests that relationship between finger plethysmography and postural change could be applied to evaluate clinical cardiovascular status.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.1
• /
• pp.1406-1412
• /
• 2018

This study aimed to measure the grip strength of the dominant and non dominant hands of right-handed normal adults in the supination, pronation, and neutral positions of the forearms. The subjects of this study were instructed to make the standard posture suggested by the American Society of Hand Therapists (ASHT) in order to minimize the impact of changes in the posture of the body as follows. The grips strength was statistically different between groups (p<.05). In the follow up test using Scheffe test, the grips in the neutral position and supinator position did not show any difference, while the grip in the pronation was smaller than those of the above two other positions. The grips of the mainly used forearm and non-mainly used forearm of the study target did not show any statistically significant difference in the neutral, supinator and pronation positions of the forearm. This study is expected to provide basic information for studying the impact of the positions of the forearms on grip strength, assessing the prehensility of patients in clinical settings, and setting therapeutic goals.

• The Journal of Korean Physical Therapy
• /
• v.31 no.5
• /
• pp.298-303
• /
• 2019

Purpose: This study examined the effects of slashpipe exercise on reducing the thickness of the left and right external oblique, internal oblique, transverse abdominis, erector spinae, and multifidus muscles. Methods: A total of 29 healthy adult men and women were included in the study. They performed trunk flexion in the supine position and trunk extension in the prone position with a slashpipe and weight bar. The external oblique, internal oblique, and transverse abdominis muscles were measured in the supine position, while the erector spinae and multifidus muscles were measured in the prone position. The data were analyzed using the SPSS ver 21.0 statistical program. The difference in thickness between the right and left sides of the trunk muscle was analyzed by repeated measures analysis. The statistical significance level was set to p<0.05. Results: The results showed that the slashpipe exercise reduced significantly the difference in thickness of the oblique internus and erector spinae muscles compared to the weight bar exercise. Conclusion: The chaotic fluidity of the fluid filled inside the slashpipe could be used as sensory feedback information on body mal-alignment, which would have positively affected the symmetrical contraction of the trunk muscles as a trigger for self-correction. Therefore, it will have a useful effect not only on the health of the general public, but also on low back patients and athletes with muscle asymmetry.

• The Journal of Korean Physical Therapy
• /
• v.31 no.3
• /
• pp.147-150
• /
• 2019

Purpose: The purpose of this study was to compare the reliability of unilateral hip abductor strength assessment in side-lying with break and make test in subjects with pelvic drop. Hip abduction muscles are very important in the hip joint structures. Therefore, it is essential to evaluate their strength in a reliable way. Methods: Twenty-five subjects participated in this study. Unilateral isometric hip abductor muscle strength was measured in side-lying, with use of a specialized tensiometer using smart KEMA system for make test, of a hand held dynamometer for break test. Coefficients of variation, and intra class correlation coefficients were calculated to determine test-retest reliability of hip abductor strength. Results: In make test, maximal hip abductor strength in the side-lying position was significantly higher compared with break test (p<0.05). Additionally, Test-retest reliability of hip abductor strength measurements in terms of coefficients of variation (3.7% for make test, 16.1% for break test) was better in the side-lying position with make test. All intraclass correlation coefficients with break test were lower than make test (0.90 for make test, 0.73 for break test). Conclusion: The side-lying body position with make test offers more reliable assessment of unilateral hip abductor strength than the same position with break test. Make test in side-lying can be recommended for reliable measurement of hip abductor strength in subjects with pelvic drop.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.97-102
• /
• 2008

The vibration of a vehicle, which is caused by and transmitted from the engine, has significant effect on the ride comfort and the dynamic characteristics of the engine mount system have direct influence on the vibration and noise of the vehicle. This paper examines the body shake caused by the engine excitation force on engine key on/off of a medium truck by experiment and simulation. The analysis model consists of the engine, a body including the frame, front and rear suspensions and tires. The force element between the body and the suspension is modeled as a combination of a suspension spring and a damper. The engine shake obtained from the experiment was compared with the result of the computer simulation, and by using the verified computer model, parametric study of the body shake on engine key on/off is performed with changing the stiffness of an engine mount rubber, the engine mount angle, and the position of engine mounts.

• Structural Engineering and Mechanics
• /
• v.37 no.5
• /
• pp.475-487
• /
• 2011

In a flexible multi-body dynamic system the typical topological optimization method for structures cannot be directly applied, as the stiffness varies with position. In this paper, the topological optimization of the flexible multi-body dynamic system is converted into structural optimization using the equivalent static load method. First, the actual boundary conditions of the control system and the approximate stiffness curve of the mechanism are obtained from a flexible multi-body dynamical simulation. Second, the finite element models are built using the absolute nodal coordination for different positions according to the stiffness curve. For efficiency, the static reanalysis method is utilized to solve these finite element equilibrium equations. Specifically, the finite element equilibrium equations of key points in the stiffness curve are fully solved as the initial solution, and the following equilibrium equations are solved using a reanalysis method with an error controlled epsilon algorithm. In order to identify the efficiency of the elements, a non-dimensional measurement is introduced. Finally, an improved evolutional structural optimization (ESO) method is used to solve the optimization problem. The presented method is applied to the optimal design of a die bonder. The numerical results show that the presented method is practical and efficient when optimizing the design of the mechanism.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.223-227
• /
• 2014

This paper presents an improvement method for human body sensing module and management system, specifically focused on the human body detection module with ultrasonic sensors to detect the usage of toilets and the management system to control the state of the toilets of the entire building. The proposed human body sensing module consists of the detection sensor to detect the movement of human body and the contact sensor to detect the position in a certain distance. The management system is configured of the control unit to process the signal transmitted from sensors, opening and closing valves according to the sensing signal, and the short range wireless communication unit to save the operational status data as well as transmit the data at regular intervals.

• Journal of Fashion Business
• /
• v.18 no.2
• /
• pp.54-65
• /
• 2014

This study developed basic pattern for competition figure skating wear for school girls. Figure skating wears are difficult for making basic patterns based on standard size chart, because girls' body size are slimmer and more slender compared to the general girl's and the competition wears such as, swim suit with sleeves are, closely in contact with the player's body. The competition wears for school girl was made with consideration of changing of the body shape, physical exercises, and various specificities according to stretch material. To raise artistic effect while doing beautiful motions, and to assist in facile technique motions, competition wears need to have enough ease on the side line from waist to armpit, from armpit to wrist, and in trunk girth including crotch girth. Also, to stand out in beauty, a costume designing has a proper skirt position, length, flare width, and a tight bodice according to the player's body proportion. Most of the customers are displeased at the high price, unfitness of size, insufficient design, and difficulty in access, since they are not sold in sporting goods store. Therefore, a competition wear's basic pattern was made through scientific and emotional process including concerns on material properties, room for activities, and ideal body proportion. Systemizing the basic patterns of production method will solve high repairing expenses, unsuitable sizing, and improve accessibility for purchase.

• PNF and Movement
• /
• v.18 no.1
• /
• pp.87-95
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of whole-body vibration training on the flexibility and agility of professional soccer players. Methods: Sixteen professional soccer players participated voluntarily in the study. Subjects were allocated to two groups: the experimental group received whole-body vibration (WBV) and team training, and the control group received only team training. Team training was conducted in 15 sessions of 70 min duration over 3 weeks. WBV training was applied at 40 Hz frequency, 5 sets (1 min-training, 1 min-resting) in a squatting position. Outcomes from sit-and-reach, side-step test, burpee test, and T-test were measured before and after training. To examine pre- and post-intervention differences between the two groups, a paired t-test was used. Independent t-tests were performed to compare pre- and post-test scores and the time difference of the two groups. Results: Significant improvements in sit-and-reach and agility variables were observed in the experimental group (p < 0.05). In particular, flexibility (sit-and-reach) and agility (the side-step test and the burpee test) were significantly different between the two groups (p < 0.05). Conclusion: These findings suggest that whole-body vibration training has a positive effect on performance enhancement for professional soccer players.