• 패션비즈니스
• /
• 제16권1호
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• 복식
• /
• 제65권2호
• /
• pp.157-175
• /
• 2015

The study was aimed to develop a torso-type dress form representing body features of the female fashion models in Korea. To fulfill this purpose, 5 female fashion models aged between 20 and 26 having the average body measurements of professional fashion models in Korea were selected and their 3-D whole body scanned data were analysed. The 3-D whole body scanning method enabled to generate a virtual female fashion model within the CAD system by measuring the subjects' body shapes and sizes. In addition, the virtual model's body data led the development of a standard female fashion model dress form for the efficient fashion show preparation. In order to manufacture the real dress form for female fashion models, 3-D printing technology was adopted. The consequent results are as follows: (1) the body measurements (unit: cm) of the developed dress form were: biacromion length, 36.0, bust point to bust point, 16.6, front/back interscye lengths, 32.0/33.0, neck point to breast point, 26.0, neck point to breast point to waist line, 41.5, waist front/back lengths, 34.5/38.5, waist to hip length, 24.0, bust circumference, 85.0, underbust circumference, 75.0, waist circumference, 65.0, hip circumference, 92.0. (2) the body measurements differences between the developed and existing dress forms were highlighted with the body measurements of neck point to breast point and waist to hip length. (3) the body shape features of the developed dress form showed that bust, shoulder blade, shoulder slope, abdomen and back waist line to hip line parts were more realistically manufactured.

• 복식문화연구
• /
• 제9권6호
• /
• pp.893-907
• /
• 2001

The main purpose is to study the effects of princess lines on different body types and to disguise any imperfection by using diverse princess lines. We separated testers body shapes into specific body types, H, Y by applying both the direct and the indirect measurements. These designs were evaluated by using the point ranking system method, and then average scores were obtained from these evaluations. Following are the results of the study: 1 These are the resulting illusion effects when the shoulder width of the Princess line was fixed. When the Princess line originated from 1/3 point of the armhole, body types Y appeared to show narrow waist width. A-line silhouette appeared to display the narrowest shoulder width. When the Princess line originated from 2/3 point of the armhole, body types H and Y appeared to exhibit narrowest waist widths, and the A-line silhouette once again displayed the narrowest shoulder width. When the Princess line originated from 1/2 point of the armhole, body type H appeared to exhibit narrow width; and H-line silhouette displayed the narrowest shoulder width 2. When the Princess lines waist w'4th was fixed in order to study illusion effects of waist widths. In this experiment, locations of Princess lines and widths of the skirt were varied. When the waist width was fixed at 6.5 cm, For the H body type, the Princess line location of 1/3 point of the armhole in H-line silhouette design exhibited the narrowest waist width. For the Y body type in A-line silhouette design, the Princess line locations of 1/3 and 1/2 points of the armhole exhibited the narrowest waist width because it displayed the hourglass effect. When the waist width was fixed at 10 cm, H body type did not exhibit any significant differences between designs. For Y body type, A-line silhouette design with the Princess line origination point at 1/3 down the armhole exhibited the narrowest waist width. 3. The illusion effects of the hip were studied by fixating the width of the skirt and varying the locations of Princess line and waist widths. In H-line skirt silhouette designs, all two body types exhibited narrow hips when the Princess line origination points were at 1/3 and 1/2 way down the armhole. For A-line skirt silhouette, H body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/2 point in the shoulder was shown. Y body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/3 point of the armhole and 2/3 point of the shoulder. 4. With both waist and skirt widths fixed, all two body types exhibited taller and slender postures when the Princess line originated from the shoulder compare to the armhole.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.253-259
• /
• 2002

The rigid body characteristics (value of mass, Position of center of mass, moments and products of inertia) of mechanical systems can be identified from FRF data or vibration spectra of rigid body motion. Therefore the accuracy of rigid body characteristics is connected directly with the accuracy of measured data for rigid body motions. In this paper, a method of improving accuracy of measurement of rigid body motion is presented. Applying rigid body theory, ail translational and rotational displacements at a tentative point on the rigid body are calculated using the measured translational displacements for several points and transfer matrix. Then the estimated displacements for the identical points are calculated using the 6 displacements of the tentative Point and transfer matrix. By using correlation coefficient between measured and estimated displacements, we can detect the existence of errors that are contained in a certain measured displacement. Consequently, the improved rigid body motion with respect to a tentative point can be obtained by eliminating the contaminated data.

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.534-543
• /
• 2002

The purpose of this study was to identify the body proportions of girls in middle and high school who have been a major sales target of clothing manufacturers and thus to provide the basic information on the proportion of human body, which is essential for manufacturer to produce clothing and for individual consumers to select right apparels to wear and purchase. The subjects were 133 girls in middle school and 141 girls in high school. As measuring instruments, the Martin's anthropometer, tapelines, and belts for marking waistline were used. In order to analyze the data, t-test and factor analysis were used. The measurement of vertical distance between vertex and measuring points, showed a significant difference between the high school group and middle school group in every item. In the comparison of eight head proportion between the two groups, middle school students had 7.2 head proportion while girls in high school had 6.9 head proportion in detail. The factor analysis of major divided body parts of the two groups indicated that waist-hip and hip-crotch, constituting lower trunk together, vertex-apex nasi, and apex nasi-back neck point, constituting head together, back neck point-spina scapula and spina scapula-waist, constituting posterior of upper body together, and mentum-bust point and bust point-waist, constituting anterior of upper body together, were in inverse proportion.

• 대한한의정보학회지
• /
• 제14권2호
• /
• pp.47-57
• /
• 2008

This paper aims at the comparative study of practicing Buddhism and Taoism related to "life gate". The term "life gate", as a physiological entity of disputed morphological identity, first appears in The Inner Canon where it refers to the eyes. Reference to a "life gate" as an internal organ body first appears in The Classic of Difficult Issues which states, "The two kidneys are not both kidneys' The left one is the kidney, and the right is the life gate." Successive scholars refers to life gate as a gi point of Taoists.. The question of the life gate invited little discussion until the Myeong and Cheong Dynasty, when various different theories were put forward. Especially Jin Sa-taek says "life gate" is the governor of the twelve place in the human body, throwing light on the meaning of it. Not that life gate denotes a local point, it does a system of life gate. Generally speaking, life gate designates cinnabar field. I think that the human body produces essence by way of life gate. That is, the human body is unified by the system of life gate. Life gate is not only the source of infusing the engine of the human body with vital energy but also as well as gi-point.

• 한국의류산업학회지
• /
• 제11권5호
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• 패션비즈니스
• /
• 제24권1호
• /
• pp.29-42
• /
• 2020

The purpose of this study is to analyze the body size and body characteristics of short-statured females in their 20s and 30s using direct measurement data from the 7th size Korea, and to analyze the differences in body dimensions and proportions between the regular and tall groups of short groups. The goal is to identify the dimension areas that need attention when designing and grading patterns for this short groups. As a result, it was found that the short group was shorter in height than the regular group, and the circumferential dimension was similar to the regular group. When designing patterns the tops, the grading of the Bust point-bust point is not necessary for the height, and it is not necessary to grade the Neck point to breast point in the short and regular group. These groups showed a difference in the front silhouette but not in the side silhouette. Based on these findings, the body types were classified into the following three types: 'most bulky and heavy', 'long lower body and small shoulder', and 'small and thin'. The type 1 population was the least distributed, and the relatively small and slim type was the most common. It is expected that the results of this study can be used as a reference when setting pattern designs, grading values, and production ratios by size for short women.

• 한국의상디자인학회지
• /
• 제20권4호
• /
• pp.31-40
• /
• 2018

The purpose of this study is to identify the body type characteristics of fashion models by comparing body dimensions and body types of fashion models with ordinary women in their 20s in Korea. To that end, the study selected 71 people, with 28 being female university students in the Seoul area and 43 professional fashion models. One hundred and fifty-seven ordinary woman were selected who ranged from 20 to 29 years old, and 588 women from the 7th Size Korea fit for research purposes. Body measurement items were selected for the direct measurement data for Size Korea, which included 20 items of body size and 10 items of calculation needed for clothing production. The results of the study were as follows. According to the analysis of fashion models and ordinary woman in their 20s, their body size showed significant differences in 25 out of 30 items. The five items that do not show significant differences are bust point-bust point, waist back length, front interscye length, hip circumference-bust circumference, and neck point to bust point to waistline-waist front length. If you integrate the results, the fashion model is much taller than the ordinary woman, has a longer lower body, and has an 8.05 head figure. Also, the fashion model found itself to be the ideal type that ordinary women prefer because of the slimmer waist and bent shape, which is more than that measured in normal women.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.287-294
• /
• 2011

Purpose: Reduction malarplasty is one of the common aesthetic procedures performed in the Orient. We have analyzed effective operative methods according to the pivot point for the osteotomy and reposition of the zygoma for reduction malarplasty after confirming the shapes of the individual zygomas. Methods: Thirty-six patients had been received malarplasty over the last 10 years. The average follow-up period was 16 months. We categorized the patients into three groups according to their prominent appearance features. Group I had a prominently protruded zygomatic body, group II had a prominently protruded zygomatic arch, and group III had a prominently protruded body and zygomatic arch. In the group I, two parallel oblique osteotomies on the body, the middle portion was removed, and with the zygomatic arch as the pivot point, the body was repositioned inwards. In the group II, the zygomatic body and arch osteotomy is performed, with the body as the pivot point, and the arch is depressed medially. In the group III, using the two aforementioned methods, the zygoma was repositioned medially. In each case, postoperative complications and patients satisfaction over the surgery were surveyed. Results: Each group had 25, 5 and 12 patients respectively. No significant complications were found except for one patient who experienced a non-union of zygomatic bone. In the case of group I, four patients underwent a secondary operation. Conclusion: Reduction malarplasty is popular as an effective facial contouring surgery. In order to obtain more effective results,however, the zygomatic shape should be identified, and appropriately repositioned by different operative technique according to pivot points.