• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.565-573
• /
• 2018

Cyclotron for medical purposes generates nuclear reaction by accelerating protons in high speed, in order to produce radiopharmaceuticals, and unnecessary neutrons are generated through such nuclear reaction. Neutrons cause activation in the parts of cyclotron which then cause exposure to radiation for people working in the field. This study, in that regard, aims to analyze exposure level by finding out the degree of activation of aluminum body, silver body, and havar foil which are the parts of Targetry where the nuclear reaction takes place. The results of the experiment showed that aluminum body and silver body had no problems re-using them as the energy and half-life of activated nuclides were small and short, making the affect on the people working in the field extremely low. However for havar foil, its activated nuclides had a high level of energy which resulted in high level of affect to the people working in the field. The activation factors of the cyclotron were analyzed, and the results showed that the Havar foil was activated the most among the targetry parts, and greatly exposed workers due to regular replacement, and needed special management as radioactive waste.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.163-167
• /
• 2008

This paper presents the analysis of tactile effects on different body parts according to the various vibration patterns. The experiments use a vibration pad made of 16 vibration elements in the form of $4{\times}4$ array. The vibration elements are controlled by a 8-bit microprocessor. The sound of gunshot initiates a vibration pattern on different body parts and its sensitivity is measured. The analysis of the experiments lead us to conclude that the vibration pad is the most realistic interface for shooting games and the shoulder part is the most sensitive part in the body. In addition, the most effective vibration pattern is the for the pattern which gives the sensation of spreading out from the center to the outside. This study analyzes the relationship between the human body parts and the tactile sensations by the various vibration patterns. The result of this study will be a good reference for user studies in the field of haptics based on the vibration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.335-342
• /
• 2003

In this study, the effects of oxide layer formed on the contact parts of TiN coated ball and steel disk in sliding are investigated. Also wear mechanism to from the oxide layer and the characteristics of the oxide layer formation are investigated. AISI 52100 steel ball is used for the substrate of coated ball specimens. Two types of coated ball specimens were prepared by depositing TiN coating with 1 and 4 ${\mu}{\textrm}{m}$ in coating thickness. AISI 1045 steel is used for the disk type counter-body. To investigate the effect of oxide layer on the contact parts of the two materials, the tests were performed both in air for forming oxide layer on the contact parts and in nitrogen environment to avoid oxidation. And to study the effects of surface roughness of counter-body, TiN coating thickness and contact load of sliding test on the characteristics of oxide layer formation on counter-body, various tests were carried out. From the results, the friction characteristics between the two materials was predominated by iron oxide layer that formed on wear track on counter-body and this layer caused the high friction. And the formation rate of the oxide layer on wear track increased as the real contact area between the two materials increased as the contact load increased, the TiN coating thickness decreased and the surface of counter-body smoothened.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.109-116
• /
• 2001

In this study, the effects of oxide layer formed on the contact parts of TiN coated ball and steel disk in sliding are investigated. Also wear mechanism to form the oxide layer and the characteristics of the oxide layer formation are investigated. AIS152100 steel ball is used for the substrate of coated ball specimens. Two types of coated ball specimens were prepared by depositing TiN coating with 1 and 4um in coating thickness. AISI1045 steel is used for the disk type counter-body. To investigate the effect of oxide layer on the contact parts of the two materials, the tests were performed both in ambient for forming oxide layer on the contact parts and in nitride environment to avoid oxidation. And to study the effects of surface roughness of counter-body, TiN coating thickness and contact load of sliding test on the characteristics of oxide layer formation on counter-body, various tests were carried out. From the results, the friction characteristics between the two materials was predominated by iron oxide layer that formed on wear track on counter-body and this layer caused the high friction. And the formation rate of the oxide layer on wear track increased as the real contact area between the two materials increased as the contact load increased, the TiN coating thickness decreased and the surface of counter-body smoothened.

• Korean Journal of Human Ecology
• /
• v.7 no.3
• /
• pp.35-48
• /
• 2004

In this study, by determining lower limb movements which cause significant changes in body surface lines, body parts with the greatest maximum expansion and contraction rate respectively were illustrated in descending order. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Movements which cause measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. Among average expansion and contraction rates in such movements, maximum average expansion and contraction levels, maximum average expansion and contraction rate, and classes of expansion and contraction rate were determined per body part. The results of this study are as follows. First, 5 lower limb movements; F2, F5, F6, F7, F8, which caused significant changes in body surface lines were determined and illustrated in table 4. Second, the levels, rates, and classes of expansion and contraction rate per body part are illustrated in Tables 5 and 6. Body parts with the greatest maximum expansion rate were, in descending order: upper segment of center back leg line, upper segment of inner leg line, middle segment of center front leg line, posterior crotch length, anterior knee girth, anterior thigh girth, center back leg line, girth at crotch height, anterior midway thigh girth, hip girth, anterior crotch length, knee girth, waist girth, inner leg line, thigh girth, and crotch length. Those with the greatest maximum contraction rate were, in descending order: anterior crotch length, upper segment of center front leg line, lower segment of center back leg line, center front leg line, and posterior thigh girth. The maximum expansion rates and maximum contraction rates, which ranged from 2.05 to $35.95\%$ and from -0.20 to $-30.16\%$ respectively, were classified per body part into 4 ABCD classes. The body part with maximum expansion was the upper segment of the center back leg line at vertical body surface line, expanding by $35.95\%$ or 16.03cm in F5 flexion movement. In contrast, the body part with maximum contraction was the anterior crotch length at vertical body surface line, contracting by $-30.16\%$ or -10.54cm in F5 flexion movement. Both, however, were the body parts to expand or contract the most among all horizontal and vertical body surface lines.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.768-776
• /
• 2017

This study analyzed the relationships among actual body types, perceived body types, body-image discrepancy(difference between perceived and ideal body), and body satisfaction, and their effects on jacket fit satisfaction at 17 body parts of women in their 20s. To apprehend the actual body type of subjects, total 18 items were measured according to the anthropometric method of the 6th anthropometric survey project. The relationship between body-image discrepancy and body satisfaction was correlated in all body parts. Body-image discrepancy and body satisfaction were more affected by perceived body size than actual body size. The fit satisfaction level of the jacket was found to be lower as the discrepancy between the body type and the ideal body type was recognized. As the waist girth, hip girth, armscye girth, and upper arm girth were smaller, the height was taller, bust girth and breast size were larger, these body sizes were considered as closer to the ideal body shape and the jacket fit of the area was more satisfied. When the perceived body sizes and the actual body sizes were compared, the women in their 20s tended to perceive their waist, abdomen, and hip as larger, their shoulder length and front/back interscye as longer, their breast size as smaller, and their waist height as lower than the actual size.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.109-113
• /
• 2004

The present study attempted to consider the effects of cutting lines in the knee parts of slacks on the clothing pressure and comfort. The study compared and analyzed the pressure imposed to the body in a stooping position and the consequent sensations felt by the wearer according to the slack shapes. The conclusion was drawn as follows: The pressure imposed by the slacks to the body is greater on the two points slightly upper and lower from the knee point than on the knee point itself, regardless of the slack shapes. Clothing pressure was lower in the slacks with 10 cm-wide and 14 cm-wide cutting lines in the knee parts than those with 18 cm-wide cutting lines. Subjective sensations felt in the knee parts were analyzed according to slacks shapes. As a result, it was found that slacks without cutting lines on the knee parts or with sewing lines far from the knee points were more comfortable. In slacks construction, the use of cutting lines in the knee parts can decrease pressure imposed to the knee area or improve the comfort of the slacks. When designing slacks, however, overall appearance should be considered and the weakness of cutting line that makes legs look shorter should also be complemented.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2007

In recent years, many robotics researches have been focused on developing human-friendly robots, that is, humanoid biped robots. The researches of humanoid robots include various areas such as hardware development, control of biped locomotion, artificial intelligence, human interaction, etc. The present work concerns the hardware development of a mid-size humanoid robot, BONOBO, focusing on rapid development of outer body parts with integrated application if CAD/CAM/CAE/RP. Most parts are three-dimensionally designed using 3D CAD, and effectively connected with CAE analyses using both kinematic simulation and structural analysis. In order to reduce lead time and investment cost for parts developments, Rapid Prototyping (RP) and CAM are selectively utilized for manufacturing body parts. These master parts are then replicated using the vacuum casting process, from which we can obtain plastic parts repeatedly. Through this integrated approach, the first prototype of BONOBO can be successfully developed with relatively low time and investment costs.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.106-109
• /
• 2008

The aim of this study is to develop a model of layering system for future soldier system. Future soldier has been supposed to carry various digital devices embedded into the combat uniform. The combat uniform must be developed to be fit to soldier's body and movement, and can be felt comfortable to soldier. The Uniform must be studied in ergonomic and physiological component because it is different from the present one. It has many devices inside, so there are some unknown barriers to set the devices on to the body. For making the ergonomic aspect of future combat suits clear, the movement of the body was researched. The size of arms(3 parts), torsos(4 parts), and legs(3 parts) of people were measured by movement. Many dots were drawn on the testees' bodies every 3cm. Each time they made compulsory poses, the distances between dots be measured and analyzed. For making the physiological aspect of future combat suits clear, the thermo-map and sweating map of body were made. The 3 maps - movement, thermo and sweating- were overlapped. The devices for future soldier were arranged on the overlapped map considering relations between devices. The final layering system developed on the arrangement of devices.

• Fashion & Textile Research Journal
• /
• v.3 no.5
• /
• pp.409-414
• /
• 2001

The purpose of this study was to determine the relationship between body cathexis and clothing satisfaction. The questionnaire was administered to 458 female college students in Daegu and Sangju and the results were obtained as follows. From the questionnaire, the 14 body parts were categorized into 4 factors, these being weight/girth, lower body, face, height/length. The bust girth was not included into one of these 4 factors. Subjects were dissatisfied with all of their body parts, especially with thigh, hip girth in the lower part of the body, as well as their weight. According to the Rohrer Index distribution, 99.2% of respondents were thin or normal, but means of respondents' satisfaction scores on weight and height were very low. To measure clothing satisfaction two factors were included, these being 'satisfaction with one's clothing selection ability' and 'satisfaction with one's own clothes'. The respondents were quite neutral on their clothing selection ability and their own clothes. Two factors about clothing satisfaction were correlated negatively. All of body cathexis factors were correlated positively with 'satisfaction with one's clothing selection ability' and were correlated slightly negatively with 'satisfaction with one's own clothes'.