• Korean Journal of Acupuncture
• /
• v.29 no.3
• /
• pp.385-395
• /
• 2012

Objectives : Meridian sinew theory was introduced in Miraculous Pivot, Huangdi's Internal Classic, to explain in relation with locations of meridian sinews, causes, mechanisms, and treatment of diseases. The meridian sinews are understood to include muscles, tendons and ligaments, or muscles in the superficial body made up with muscles, ligaments, tendons, fascia etc. This theory shows the similarity or organic relationship between the meridian sinews and muscles. From the Hippocrates(460-385 BC) ages, traction therapy was used as a treatment method on muscular diseases such as low back pain, scoliosis, etc in western medicine. The effects of traction therapy, however, were unclear so that this study was purposed to illustrate the effectiveness of continuous traction therapy and to develop meridian sinews treatment. Methods : We made 2 hypotheses to explain the cause of scoliosis occurrence, muscles contraction and relaxation. As the hypothesis, we made the spinal model having 3 joints with wood and rubber bands. Each of the three joints in the spinal model represents the case of normal(NT; control), contraction(AT 1)and relaxation(AT 2) condition, and distance between the vertebrae joints was measured. Results : Under normal circumstance models, the normal type 1(NT 1; muscle relax state) and normal type 2(NT 2; muscle contract state) all joints were being towed equally. But in an unusual contracted situation, regardless of the relationship of joint area, contracted part of joint was not released. And in a relaxed situation, regardless of joint areas, released parts of joint were further released. These observation results mean that the effects of traction might be different from the purpose of traction therapy of Hippocrates. Conclusions : To explain the effect of traction therapy for scoliosis, the spinal cord model and scoliosis model were made. After vertebral bodies were pulled with different tensile forces, we compared the observed length of the each joints pulled. The results suggested that there were no effects of traction in objected parts with traction method from Hippocrates' design, continuous traction method. Moreover, it may worsen the symptom in worst case. Of course, our results are just the result of experimental models and clinical results may be different. More careful studies, therefore, are required.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.21-34
• /
• 2005

The initial conditions that generate bounded motion in eccentric reference orbit are determined for satellite formation flying. Because Hill's equations cannot describe the relative motion between two satellites in eccentric orbit, a new relative dynamics utilizing the nonlinearity and eccentricity correction for Hill's initial conditions is implemented. The constraint that matches angular rates of chief and deputy satellites is used to obtain the bounded motion between them. The constraint can be applied to satellite formation motions in eccentric orbit, since it implicates J2 perturbation due to the central body's aspherical gravitational forces. The periodic bounded motions are analyzed for the orbit with the eccentricity of less than 0.05 and about 0.5 km relative distance between chief and deputy satellites. It is mainly illustrated that the satellite formations in small eccentric orbits can have hounded motions; consequently, the formation can be kept by matching angular rates of the satellites. These results demonstrate an useful method that reduces the cost for operating satellites by providing effective initial conditions for satellite formation flying in eccentric orbit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6610-6617
• /
• 2013

This study examined the current and future Indoor Air Quality (IAQ) control device markets and analyzed the recent studies on indoor air pollutantr emoval to develop a new technology for fine dust control. Currently, the mechanical filter technique occupies the bulk of the IAQ control market but the electronic technique is emerging as an alternative to control fine dust efficiently. Among the gaseous VOCs and fine dust particles contaminating the indoor air quality, fine dust particles are more problematic because they threaten human health by penetrating deep into the body and producing secondary contaminants by chemical reaction with VOCs. The electronic IAQ control device using dielectrophoretic and electrostatic forces is a good option for public spaces where many people pass, and at the same time, it needs to consider temperature, humidity, and the particle properties of specific areas to highlight the control efficiency. Electronic-related technology is expected to be used widely in many public/private spaces wherever a dust-free environment is required.

• Journal of Korean Society of Archives and Records Management
• /
• v.15 no.3
• /
• pp.169-191
• /
• 2015

The purpose of this study is to examine the driving forces and main contents of the reform of the records and archives management system in Japan from the 2009 enactment of the Public Records and Archives Management Act. The key essentials of the reform can be explained in two ways. First is through the legal system, a multilayer structure of the law and guidelines to the institutional documents management regulations for an effective application to each administrative institution. The other is the Public Records and Archives Management Commission, a deliberative body that guarantees the rigorous application and enforcement of the rules and regulations. One of the remarkable outcomes from the reform is the compulsory creation of minutes of the countermeasure meetings in government agencies related to the Great East Japan Earthquake Disaster, as well as the various significant cabinet meetings through a revision of the Guidelines for Public Administrative Records Management. In addition, the new construction of the National Archives of Japan and its meaning have been examined. It is being pushed ahead, with the active support of the ruling party members, through activities such as research and review meetings for improving the functions and facilities of the National Archives of Japan.

• Korean Security Journal
• /
• no.44
• /
• pp.139-167
• /
• 2015

It is known that Psychopathy is excessively selfish, using as a tool to achieve the purpose to others, irresponsible, easy liars in common. They were recognized that it is people of harmful to society, impulsive, attacking others body, ignorant others safety, enjoying or callousing others suffers. But, another aggressive behaviors are described as pro-social aggressive acts as the cops bring under control by firearms to hostage committing a crime in social norms. The proper aggression is related with national security and safety of the people that is pro-social aggression for nation and human society. Security service with the legal grounds and the convinced commitment needs self-giving works, self-sacrificial security-activity is in the center of security service. These days, psychologists reveal the people of psychopathy are CEO, politician, broadcaster, surgeon, special forces, police officer. And they distinguish themselves and contribute to a community in various fields. Therefor, this research wanted to find out the relationship between fearlessness, coldheartedness in the PPI-R(applying to the university student for checking psychopathy, except anti-social traits) and pro-social aggression, self-sacrificial security-activity.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.127-138
• /
• 1996

The strip method, unified theory and 3-D panel method are commonly used methods for the seakeeping analysis of high-speed vessels. The strip method which is basically 2-dimensional method is known to give incorrect hydrodynamic coefficients and motion responses for the cases of high speed and low frequency region. And the unified theory which uses two dimensional approach in inner domain and slender body theory in outer domain is very complicate in computational modelling. Though the 3-D panel method requires comparatively long computation time, it is believed that the method gives good results without any limitation in ship speed and range of frequency for computation. In the 3-D panel method the source singularity representing translating and pulsating Green function is used and Hoff's method is adopted for the numerical calculation of the Green function. The computation time can be reduced by using the symmetry relationship with respect to longitudinal axis. In this paper the strip method and the 3-D panel method are compared for the seakeeping analysis of a high-speed catamaran. The Compared items are the hydrodynamic coefficients, wave exciting forces, frequency response functions and short-term responses in irregular waves.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.280-287
• /
• 2011

Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. Results: No miniscrews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. Conclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.825-837
• /
• 2017

This paper describes a novel type of a walking rehabilitation robot that applies robot technologies to crutches used by patients with walking difficulties in the lower body. The primary features of the developed robot are divided into three parts. First, the developed robot is worn on the patient's chest, as opposed to the conventional elbow crutch that is attached to the forearm; hence, it can effectively disperse the patient's weight throughout the width of the chest, and eliminate the concentrated load at the elbow. Furthermore, it allows free arm motion during walking. Second, the developed robot can recognize the walking intention of the patient from the magnitude and direction of the ground reactive forces. This is done using three-axis force sensors attached to the feet of the robot. Third, the robot can perform a stair walking function, which can change vertical movement trajectories in order to step up and down a single stair according to the floor height. Consequently, we experimentally showed that the developed robot can effectively perform walking rehabilitation assistance by perceiving the walking intention of the patient. Moreover we quantitatively verified muscle power assistance by measuring the electromyography (EMG) signals of the muscles of the lower limb.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.335-342
• /
• 2015

Objective : The purposes of this study was to analyze the effects of the stirrup length fitted to the rider's lower limb length and it's impact on less skilled riders during trot in equestrian events. Methods : Participants selected as subjects consisted of less skilled riders(n=5, mean age: $40.02{\pm}10.75yrs$, mean heights: $169.77{\pm}2.08cm$, mean body weights: $67.65{\pm}7.76kg$, lower limb lengths: $97.26{\pm}2.35cm$, mean horse heights: $164.00{\pm}5.74cm$ with 2 type of stirrups lengths(lower limb ratio 74.04%, and 79.18%) during trot. The variables analyzed consisted of the displacement for Y axis and Z axis(head, and center of mass[COM]) with asymmetric index, trunk front-rear angle(consistency index), lower limb joint(Right hip, knee, and ankle), and average vertical forces of horse rider during 1 stride in trot. The 4 camcorder(HDR-HC7/HDV 1080i, Spony Corp, Japan) was used to capture horse riding motion at a rate of 60 frames/sec. Raw data was collected from Kwon3D XP motion analysis package ver 4.0 program(Visol, Korea) during trot. Results : The movements and asymmetric index didn't show significant difference at head and COM, Also, 74.04% stirrups lengths in trunk tilting angle showed significant difference with higher consistency than that of 79.18% stirrups lengths. Hip and knee joint angle showed significant difference with more extended posture than that of 74.04% stirrups lengths during trot. Ankle angle of 79.18% stirrups length showed more plantarflexion than that of 74.04% stirrups lengths. Average vertical force of rider showed significant difference with higher force at 79.18% stirrups lengths than that of 74.04% stirrups lengths during stance phase. Conclusion : When considering the above, 74.04% stirrups length could be effective in impulse reduction with consistent posture in rather less skilled horse riders.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.13-20
• /
• 2017

Unreinforced masonry buildings are vulnerable to lateral forces, such as earthquakes, owing to the nature of the building materials, yet numerous masonry buildings remain in South Korea. Since the majority of the existing masonry buildings were constructed more than 20 years ago, it is necessary to develop economical reinforcement methods for disaster reduction. In this study, external reinforcement of masonry walls using adhesive stiffeners was proposed as a reinforcement method for such age-old masonry buildings. Six specimens were fabricated with different aspect ratios (L/H = 1.0, 1.3, and 2.0) and used in static load tests to verify the reinforcement effect. The experimental results showed that the masonry walls before and after reinforcement were ruptured by rigid body rotation and slip. In addition, the maximum strength, maximum displacement, and dissipated energy of the walls were shown to increase after applying the adhesive stiffeners, thereby verifying the excellent reinforcement effect. Furthermore, an adhesive stiffener design for unreinforced masonry walls was proposed based on the increased shear strength achieved by using conventional glass fibers. The proposed design can be used as a basis for the application of adhesive stiffeners for unreinforced masonry walls.