This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.
개인별 신체 특성을 나타내는 가상피팅모델을 이용하여 제공되는 가상 착용 서비스는 웹을 기반으로 한 인터넷 의류 쇼핑의 흥미를 더해준다. 본 연구의 연구자들은 2000년과 2002년에 개발된 미국의 가상피팅모델과 국내에서 개발되었던 가상피팅모델의 개발 기술의 특성과 변화를 분석하였다. 연구결과는 가상피팅모델의 구축을 위해서는 인체의 치수, 형태, 얼굴의 특징들에 관한 정보 입력이 필요하며, 이때 요구되는 정보는 미국과 한국의 사이트에서 차이가 있음을 밝혔다. 미국의 사이트는 정면이나 측면의 실루엣에 대한 정보의 입력이 요구되는 반면 한국의 사이트는 더 많은 인체 치수 관련 정보를 요구하였다. 2000년에 개발되었던 한국의 가상피팅모델은 길고 좁은 프로포션으로 표현되어 사실적인 표현이 부족하였던 반면 2002년 미국에서 개발한 가상피팅모델은 다양한 인종의 특성을 반영하며, 그래픽 기술의 발전으로 사실적으로 표현된 가상피팅모델을 제공하는 것으로 나타났다.
This study was conducted to develop a basic pants pattern reflecting the average body shape of Chinese women in their 20s by using a virtual fitting method. A formula for the research pattern was derived by applying the measured value based on the drafting method of existing patterns. The final pattern was presented through two actual fitting processes. The suitability of the final pattern was then verified through a functional evaluation and an appearance evaluation based on an actual fitting and a virtual fitting. As a result of the evaluations, the final pattern reflected the body shape of Chinese women in their 20s and was evaluated as a higher quality pattern compared to existing patterns. The final pattern was based on the omphalion waist circumference. Ease amounts were set to be the omphalion waist circumference + 1.0 cm, hip circumference + 2.0 cm, and the pants length was set to 94 cm.
The purpose of this study is to find the Dart Manipulation with good fitting and evaluate the aesthetics of Dart Manipulation that is used in the designs of the original tops for women in their 30's. Subsequently, it suggests dart manipulation with good body fitting and physical fitness when designing original tops. The findings of this study are as follows. First, in the fitting of Dart Manipulation for different body types, cross direction Dart Manipulation received good marks in the Square Body Type while mixed direction and diagonal direction Dart Manipulation received high evaluation in the Standard Body Type. Also, for the Reverse Triangle Body Type, mixed direction Dart Manipulation received high marks. Since there are only small changes in fitting for the Square Body Type, the position of Dart Manipulation should be determined in regards to the aesthetic view as well as the fitting of the Standard Body Type and Reverse Triangle Body Type. Second, in the fitness of Dart Manipulation for different body types, an approach from the aesthetic view should be considered for Square Body Types because of the differences in fitness according to the position of dart manipulation. The fitness should be considered when positioning Dart Manipulation for the Standard Body Type and Reverse Triangle Body Type because of these differences. Third, for the greater variance of drop for these different body types, the change of the amount of dart received lower evaluation in fitting since the amount of dart increased when the dart was located higher than B.P. The number of dart should likely increase when gathering or tucking is necessary when there is an excessive amount of dart in Dart Manipulation for the different body types. Fourth, as for the changes of wrinkles in accordance with the body type, wrinkles were likely to be formed at the breast or neck area when there was a larger difference in drop. To prevent such problems, one more dart should be made on the wrinkle. In conclusion, the study suggests designing the original top with a better look and comfort by setting the balance between aesthetics and fitting in the design stage.
의류상품의 전자상거래 시장이 확대됨에 따라 인터넷쇼핑에서 의류를 구매할 때 선택한 의류를 착용한 자신의 모습을 확인하는 도구로 가상피팅모델이 제공되고 있다. 본 연구에서는 가상피팅모델 구축 시 사용자의 주관적인 체형인식을 반영할 필요가 있는지 알아보기 위하여 여성의 신체 치수나 체형에 대한 인식이 어떻게 다른지 연구하였다. 의류학 전공 여자대학원 50명을 대상으로 실험한 본 연구의 결과는 인체부위에 대한 개인의 치수인식이 체형에 따라 다름을 보여준다. 연구자들은 인터넷 의류 쇼핑용 가상피팅모델을 구축하기 위해서는 사용자 신체치수뿐만 아니라 사용자가 인지하는 자신의 체형특성을 반영할 필요가 있다고 결론지었다 특히 배가 많이 나온 체형도 자신이 실제보다 배가 나오지 않은 체형으로 생각하는 경향이 있으므로 여성이용자에게 거부되지 않는 가상피팅모델을 구축하기 위해서는 지나치게 극단적인 체형의 가상피팅모델의 구축은 신중하게 고려해야함을 시사하였다.
The purpose of this study is to investigate the relationship between body-types and skirt-patterns by analyzing various fitting conditions of the skirt patterns in relation to the body-types. To achieve this, fitting tests were done on six types of skirt-patterns. The tests included four body-types selected according to the existing classification of the types of under part of the body. Sensory tests were performed on the existing patterns and new drafting method based on the results of the fitting tests. The results of the fitting tests and sensory test are as follows. 1. The existing skirt-patterns were relatively well-fitted except for certain parts in standard somatotype (body-type A). 2. The new drafting method, designed on the basis of the fitting test on the existing patterns, scored high on all of the eighteen items included in the test This signifies the excellence of the new drafting method. 3. In the case of the allocation between the front and the back, which is the difference between the educational patterns and industrial patterns, the best silhouette was achieved when the hip-line and the waist-line were same sized both in the back and in the front. However, in the case of body-type D it was better when there was a 1cm difference between the back and the front. 4. The number of darts that best fits young persons were found to be eight, to keep their side hip-curve smooth. Further, it is desirable to set the center line of the dart as the vertical waist-line. 5. The best length of the darts were determined to be 12.5cm, 11ch in the back, and 11cm, 9.5cm in the front. Adjustments would be made according to the differing body-types in the range of 0.5cm. 6. The lowerness of the back waist-line for the normal was determined at 1.5cm, with some variations in other body-types. 7. The front waist-line was needed to be 1cm lowered in the case of body-type B, whereas, in the case of body-type D, it was needed to be 1cm raised.
In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.
With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.
This study analyzed a somatotype that was more suitable to a virtual fitting model and to improve the reality of a virtual model size. We analyzed 1,868 women 18-59 years old from the 6th Size Korea data. First, factor analysis was done for abstracting new criteria for dividing the somatotype; subsequently, we selected the waist height proportion to stature (body proportion) and drop (torso shape). Next, the cluster analysis was done with these criteria and 7 body proportion types and 11 torso shapes were distinguished. A virtual model size for the most common somatotype was also developed by a regression analysis of constituting sizes of each factor that was compared with body sizes well as with Clo's virtual model size. The model of this research showed a high similarity in sizes with body as well as improved better realisty than the Clo model which presented size problems such as longer limbs, bigger bust, smaller waist and a smaller arm circumference than the real body.
The purpose at this study is to develop the appropriate bodice model for Chinese women in order to contribute to the improvement of fitness at clothing products that are exported to China. The sample group was the subject of 149 persons with the standard body shape at 19-24 years old women who reside in Beijing and Shanghai, China. The data analysis is processed for statistics using SPSSWIN 10.0 PROGRAM, and the used analysis methods are technical statistics analysis, factor analysis, group analysis, and one-way ANOVA. The outcome of this study is summarized as follows. 1. Prior to develop the tight-fitting shape of bodice model, the body classification approach by the posture and type of bending and stretching is selected to use 6 index items, and the body types are classified into bent body, right body, and pull-back body. 2. The average body size of standard body shape had 3 times of wearing experiment based on the tight-fitting shape of ESMOD bodice block drawing, and the system was corrected and supplemented to present the final bodice block drawing. 3. Comparisons have been made based on the center front line, center back line and chest circumference for each of existing bodice block for Chinese women, existing bodice block for Korean women and the combination of the bodice block under this study.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.