• 한국약용작물학회지
• /
• 제21권2호
• /
• pp.118-123
• /
• 2013

This study was carried out to select optimal shade materials among four-layered polyethylene (PE) net (FLPN), aluminium-coated PE sheet (APSS), and blue PE sheet (BPSS) in condition of paddy field cultivated 6-year-old ginseng. The order of light-penetrated ratio and air temperature by shade materials was BPSS > APSS > FLPN. Light-penetrated ratio of BPSS before two fold shade was more 3 times and 2 times than that of FLPN and APSS, respectively. Air temperature of BPSS was also higher $1.6^{\circ}C$ and $1.4^{\circ}C$ than that of FLPN and APSS, respectively. BPSS showed good cultural environment because all of light-penetrated ratio and air temperature were become higher in spring and fall season but lower in summer season by additional shade with two-layered PE net. Survived-leaf ratio was highest in BPSS and lowest in FLPN causing a little water leak on a rainy day. Rusty-root ratio was also highest in FLPN because soil moisture content was increased by water leak. The order of root yield was BPSS > APSS > FLPN, and the cause of highest yield in BPSS was higher light-penetrated ratio during spring and fall season, higher survived-leaf ratio, and lower rusty-root ratio than that of APSS and FLPN. BPSS showed highest total ginsenoside content because of high light-penetrated ratio, blue light effect, and the difference in dry matter partitioning ratio such as low taproot ratio, and high lateral root ratio.

• 한국약용작물학회지
• /
• 제16권6호
• /
• pp.434-438
• /
• 2008

To selection of optimal shading material, two-year-old ginseng (Panax ginseng C. A. Meyer) of new cultivar, 'Cheonpoong' (CP), and native species 'Hwangsookjong' (HS) were cultured under three kinds of shading materials such as three-layered blue and a one-layered black PE (polyethylene) net (TBSB), blue PE sheet (BS), and aluminium coated PE sheet (AS) in imperfectly drained paddy soil. Growth characteristics, yield and ginsenoside contents were investigated under three shading materials. Yield and ginsenoside contents of ginseng were distinctly affected by intensity and quality of sunlight penetrated through shading materials. Light transmission ratio, air and soil temperature according to shading materials were higher in order of BS, AS, and TBSB. However, ratio of aerial phase and porosity of the soil were higher in order of AS, BS, and TBSB, respectively. There was no significantly difference in the ratio of rusty colored root by shading materials. CP showed higher stem length, leaf area, and root weight than that of HS, while the former showed distinctly lower discolored leaf ratio than that the other. Eight kinds of ginsenosides content of CP were higher than that of HS in $Rg_1$, Re, Rf, $Rb_1$ and Rc except $Rg_2$, $Rb_2$, and $Rb_3$. Total ginsenoside contents of CP was distinctly higher than that of HS. Total ginsenoside contents as affected by shading materials was higher in order of BS, TBSB, and AS in CP, while TBSB, BS, and AS in HS.

• 접착 및 계면
• /
• 제16권1호
• /
• pp.15-21
• /
• 2015

본 연구에서는 자동차 선도장 강판용 베이스코트 도료들의 유변물성 및 롤코팅 공정에서의 유동 특성을 고찰하였다. 베이스코트 3종 색상 도료들의 상온 조건에서 전단 점도와 열경화 조건에서 탄성/점성 모듈러스의 변화를 회전형 유변물성 측정기를 통해 분석하였다. 이를 통해 작용기의 배합비율과 열경화 이전의 전단 점도 특성이 경화에 의한 도료 내 가교구조 형성에 큰 영향을 주었음을 확인하였다. 또한, 3-롤코팅 공정에서 베이스코트 도료들의 코팅 특성 및 유동 불안성정을 관찰하여 코팅 운전 영역을 설정하였다. 이러한 유변학적 접근법은 비뉴튼성 도료의 친환경적 선도장강판 코팅 기술 개발 및 최적의 안정한 조건 설정을 위해 유용하게 활용될 수 있음을 보였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.56-59
• /
• 2011

The process conditions for high efficiency industrial crystalline Si solar cells with selective emitter were optimized. In the screen printed solar cells, the sheet resistance must be 50-60V/sq. because of metal contact resistance. But the low sheet resistance causes the increase of the recombination and blue response at the short wavelength. Therefore, the screen printed solar cells with homogeneous emitter have limitations of efficiency, and this means that the selective emitter must be used to improve cell efficiency. This work demonstrates the feasibility of a commercially available selective emitter process, based on screen printing and conventional diffusion process. Now, we improved cell efficiency from 18.29% to18.45% by transition of heavy emitter pattern and shallow emitter doping condition.

• Advances in nano research
• /
• 제15권4호
• /
• pp.295-304
• /
• 2023

In this paper, a powerful photocatalyst based on carbon nanocomposite is developed in order to obtain a new material applicable in water treatment and especially for the discoloration of effluents used in the textile industry. For that, TiO₂-graphene nanocomposites have been successfully synthesized by a mixture of Functionalized Graphene Sheet (FGS) and tetrachlorotitanium complexes to form FGS-TiO₂ nanocomposite. In the presence of an anionic surfactant, we used a new chemical process to functionalize graphene sheets in order to make them an excellent medium for blocking and preventing the aggregation of TiO₂ nanoparticles. The components of these nanocomposites are characterized by means of X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), which confirms the successful formation of the FGS-TiO₂ nanocomposite. It was found that the TiO₂ nanoparticles were dispersed uniformly on the graphene plane which possesses better charge separation capability than pure TiO₂. The FGS-TiO₂ nanocomposites exhibited higher photocatalytic activity compared to pure TiO₂ for the removal of three dyes: such as Methylene Blue (MB), Bromophenol Blue (BB) and Alizarin Red-S (AR) in water. The removal process was fast and more efficient with FGS-TiO₂ nanocomposite in daylight (in the absence of UV irradiation) compared to pure TiO₂ nanoparticles without and under UV in all pH range.

• 한국작물학회지
• /
• 제59권1호
• /
• pp.27-37
• /
• 2014

본 연구는 국내 밀 품종의 국수 색깔 및 이와 관련된 종실 및 밀가루 특성 평가를 통하여 국수 면대 색깔 향상을 위해 선발에 이용할 수 있는 방법을 개발하고, 특히 철함량이 국수면대 밝기에 미치는 영향을 평가하여 영양학적으로 우수한 철 고함유 계통 선발을 위한 간이검정법의 적용을 위해 수행하였다. 국내 밀 품종의 밀가루 밝기는 회분(r = -0.634, P<0.01), 단백질 함량(r = -0.635, P<0.01)및 총 폴리페놀함량(r = -0.493, P<0.05)과 부의 상관을 나타내었다. 면대 색깔은 밀가루 명도(r = 0.684, P<0.001)와 정의 상관을 보였고, 종실특성에서 리터중, 천립중, PPO 활성 및 총 폴리페놀 함량과는 부의 상관을 보였다. 또한 밀가루 특성에서 회분, 단백질 함량과 총 폴리페놀함량은 면대 밝기와 부의 상관을 보였고, 연차간 및 품종간 변이에 영향을 받는 것으로 나타났다. 철은 밀가루 색 및 국수 면대 밝기와 부의 상관을 나타냈고, 간이검정법으로 Potassium hexacyanoferrate(II) trihydrate(PHT) 처리를 한 결과 푸른색으로 염색되었다. 종실을 PHT로 염색하여 측정한 색도와 종실의 철 함량은 상관을 보이지 않았으나, 종실을 분쇄한 통밀가루에서는 PHT로 염색된 통밀가루의 적색도(r = -0.665, P<0.001)와 황색도(r = -0.658, P<0.001)와 부의 상관을 나타내었다. 또한 PHT로 염색된 밀가루의 밝기는 종실의 철 함량(r = -0.640, P<0.01)과 부의 상관을 나타내었다.

• 한국임상수의학회지
• /
• 제24권4호
• /
• pp.644-646
• /
• 2007

This report deals with a 9-year-old neutered male Yorkshire terrier that had been suffered from vomiting, bloody diarrhea, anorexia. On exploratory laparotomy, pale-pink $10{\times}6cm$ duodenal mass was found and submitted to the Department of Veterinary Pathology, College of Veterinary Medicine, Seoul National University. Histologically, the duodenal mass consisted of compact sheet of poorly demarcated, highly infiltrative neoplasm. The neoplastic cells were round to polygonal and contained scant to moderate amounts of granular basophilic cytoplasm and eccentrically located irregularly round nuclei with stippled chromatins. The neoplastic cells were positive to lamda light chain immunohistochemically but were uniformly negative for toluidine blue stain and giemsa stains. Based on these results, this case was diagnosed as primary extramedullary plasma cell tumor of duodenum.

• 한국의상디자인학회지
• /
• 제14권3호
• /
• pp.93-109
• /
• 2012

The purpose of this study is to examine the modern men's fashion coordination to see the image in the center of TV dramas in terms of Habitu that is formed within hierarchy and class. The subjects range is included fashion style, color, accessories, hairstyle and appearance. 950 pictures used in the analysis sheet. In research methods, content analysis and basic statistics were used. The results of this study were as follows. First, the hierarchy image formed by Habitus is significant difference. The upper layer is coordinating elite luxurious and prestigious image of the fashion styles. The middle layer is coordinating neat and capable image. The lower layer does not care about the appearance and image appearing weary life is coordinating. Second, the class image formed by Habitus, CEO often interests in fashion image coordination. Senior executive is represented clean and luxurious image. General white color dresses in a suite such as office look. Blue color does not care about the fashion coordination and is expressed an easy dress for labor. Architects of the unstructured free-spirited image is represented. Physician and resident physician dress in shirts, no pattern tie, pants, robe. And they is coordinating neat and tidy attire to represent professional and reliable image.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.41-48
• /
• 2005

In this study, to improve the formability of the rear floor in series stamping process, the method for predicting the temperature of tools and steel sheet is proposed using FE analysis. To do this, tensile tests and straight pulling friction tests of three steel sheets are carried out at temperatures up to $300^{\circ}C$, and the effect of temperature on the tensile properties and the characteristics of friction are examined. The steel sheets have a higher n-value in the temperature range of about $50^{\circ}C$, and it is related to the maximum uniform elongation. Also, the blue shortness occurs in the temperature range of about $150^{\circ}C$. When the temperature is higher than $200^{\circ}C$, the friction coefficient increase with increasing temperature. From the FE-simulation, the effects of the punch temperature considering heat expansion in the number of stamping are examined and discussed. The technique developed in this study fur estimating tool temperature can be used to develop more feasible ways to improve continuous productivity in series stamping process.

• 한국연초학회지
• /
• 제22권1호
• /
• pp.99-106
• /
• 2000

In order to investigate the applicability of lyocell fiber to filter paper, papper sheets were manufactured with the addition of lyocell fibers in various length(1.5 denier: 2, 3, 4mm) and content(10, 30, 50%) and their physical characters, such as fibrilation rate, adsorption efficiency of methylene blue(MB), paper formation, and crimping ability, etc, were tested. The level of main fibrilation from lyocell fiber was higher in wet beating process than that in free beating because of the higher strength of lyocell fiber compared with wood fiber. Fibrilation could be observed at the degree of beating over 30$^{\circ}$ SR in wet beating with Valley beater. The air permeability and tear factor of the paper increased and the paper formation index decreased according to the increase of fiber length. The weak binding force of lyocell fiber in spite of its higher fiber strength, might be a limitng factor in addition of lyocell fiber to the natural wood pulp in manufacturing the paper having the needed physical properties. High contents of wood pulp decreased air permeability, the breaking length, tear factor, the bursting strength, and paper formation index in paper sheets. As the contents of lyocell increased from 10% to 100%, the adsorption efficiency of MB was elevated to 1.7-7.9 times compared with that in 100% wood pulp. But the length of lyocell fiber did not affect the MB adsorption.