• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.415-419
• /
• 2010

A phosphor-conversion white light source is demonstrated using an InGaN-based blue laser diode (LD) and a yellow-emitting phosphor excited by the blue LD. The photometric and colorimetric properties of this blue-LD-based white light source are characterized. When injection current of the LD is 100 mA, luminous flux and luminous efficiency of the white light are found to be over 5 lm and 10 lm/W, respectively. When injection current is >90 mA, luminance is estimated to be larger than 10 Mcd/$cm^2$. In addition, color characteristics of the white light such as chromaticity coordinates, a correlated color temperature, and a color rendering index are found to be quite stable as current and temperature of the LD varies. The demonstrated LD-based white light source is expected to be used in high-brightness illumination applications with good color stability.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.22-26
• /
• 2013

The author analyzes the luminous efficiency of the phosphor-conversion white light-emitting diode (LED) that consists of a blue LED chip and a yellow phosphor. A theoretical model is derived to find the relation between luminous efficiency (LE) of a white LED, wall-plug efficiency (WPE) of a blue LED chip, and the phosphor absorption ratio of blue light. The presented model enables to obtain the theoretical limit of LE and the lower bound of WPE. When the efficiency model is applied to the measured results of a phosphor-conversion white LED, the limit theoretical value of LE is obtained to be 261 lm/W. In addition, for LE of 88 lm/W at 350 mA, the lower bound of WPE in the blue LED chip is found to be ~34%. The phosphor absorption ratio of blue light was found to have an important role in optimizing the luminous efficiency and colorimetric properties of phosphor-conversion white LEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.712-713
• /
• 2017

Clinically applicable light emitting diode (LED) has been widely investigated because of relatively low heat generation, low cytotoxicity, and non-invasiveness compared to other therapeutic methods. Therefore, we investigated the therapeutic effects of several wavelengths of light emitting diode against human cervical cancer cells and analyzed the individual inhibitory effect for the cancer cell proliferation. In the experiment, prepared HeLa cells were exposed by red, green and blue light-emitting diode for 10 minutes each. Relatively short-wavelength light-emitting diode (blue) showed stronger therapeutic effects than relatively long-wavelength light-emitting diodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.762-765
• /
• 2002

The bilayer organic light-emitting diode using Al (DBM) $_3$ (DBM=Dibenzoylmethane) as an emitting material and poly (N-vinylcarbazole) (PVK) as hole-transport material, emitted bright blue-green light instead of blue light. The blue-green emission is attributed to exciplex formation at the solid interface between Al (DBM) $_3$ and the hole-transport material. The exciplex formation was evidenced by the measurement of the photoluminescence spectra and lifetimes of Al (DBM) $_3$, PVK and an equimolar amount of mixture of Al (DBM) $_3$ and PVK.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.648-650
• /
• 2007

We demonstrate highly efficient White Polymer Electrophosphorescent Light-emitting Diode using newly developed green and red light emitting heteroleptic iridium complex, Ir-(pq)2tpy, and blue light emitting fluorescent dopant, BczVBi. The best luminous efficiency reached 28cd/A with maximum luminance of 87000cd/m2. The scheme for determining optimum device architecture and dopant concentrations were constructed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.6
• /
• pp.480-486
• /
• 2006

The radiation characteristics of a high-luminance light-emitting diode (LED) light source were studied to evaluate its potential as an energy-saving light source for fishing lamps. The angle of the LED light source with 50% illuminance was $8-15^{\circ}$, and it had strong directional characteristics. The wavelengths at which the radiance and irradiance were maxima were 709, 613, 473, 501, 525, and 465 nm for red, orange, blue, peacock blue, green, and white light, respectively. The underwater transmission characteristics of the LED light source were superior in the order blue, white, peacock blue, and green in optical water type I: blue, peacock blue, white, and green in optical water type II; and blue, peacock blue, green, and white in optical water type III. Setting the underwater transmission characteristics of the LED light source in optical water type I at 100%, the transmission of water types II and III decreased to 67 and 17%, respectively. Based on the underwater transmission characteristics calculated in optical water types I-III, the blue and peacock blue LED light sources can be used as an energy-saving light source for fishing lamps.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.606-609
• /
• 1999

We fabricated white light-emitting diode which have a mixed single emitting layer containing poly(N-vinylcarbazole), trois(8-hydroxyquinoline)aluminum and poly(3-hexylthiophene) and investigated the emission properties of it. It is possible to obtain a blue light from poly(N-vinylcarbazole). green light from tris(8-hydroxyquinoline)aluminum and red light from poly(3-hexylthiophene). The fabricated device emits white light with slight orange light. We think that the energy transfer in a mixed layer occurred from PVK to Alq₃ and P3HT resulted in decreasing the blue light intensity from PVK. We find that the efficiency of the white light electroluminescent device can be improved by injecting electron more effectively and blue light need to improve the color purity of white light.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1870-1878
• /
• 2021

Objective: The objective of this experiment was to investigate the effects of different colors produced by light emitting diode (LED) on Brown Tsaiya ducks. Methods: A total of 144 female Brown Tsaiya ducks were randomly allocated into three individual cage rearing chambers with different LED illumination colors as treatments. Three different treatments were: i) white color, ii) blue color, and iii) red color. The experiment periods were from ducks 21 to 49 weeks of age, determined traits included i) egg laying performance, ii) feed intake, iii) egg shell breaking strength, iv) egg shell thickness, v) egg Haugh unit, vi) egg weight, vii) serum Estradiol and Progesterone concentration, and viii) behavior pattern. Results: The results indicated that when compared with white and blue color, red color could stimulate ducks sexual maturation and raised the egg laying performance. The red light group was also observed to have the highest feed intake among three treatments. The blue treatment had the lowest egg shell breaking strength and the highest egg weight among three treatments, nevertheless, no significant difference was observed among three treatments on egg shell thickness and egg Haugh unit. The red light group had higher serum estradiol concentration than the white and blue groups, but no significant difference among treatments on the serum Progesterone concentration was found. The results of behavior pattern indicated that red light group showed more feeding and less resting behavior compared to the blue light group. Conclusion: We found a potential of applying red light illumination in the indoor laying duck raising system with positive results on egg laying performance and acceptable egg weight, equivalent egg qualities compared to white and blue light.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1377-1378
• /
• 1998

Blue light emitting electroluminescence(EL) diodes were fabricated utilizing Coronene and some organic materials. Coronene showed photoluminescence(PL) peak at 450nm in solution with high quantum efficiency. Multi layer system was applied to fabricate EL diode utilizing Coronene. The device showed didode-like applied voltage-current relationship. And blue light emitting was observed. The decay time of device was in a scale of some seconds. The trun-on voltage of device was about 9 V.