• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.305-316
• /
• 2003

Recently, an iterative algorithm for finding the interior eigenvalues of a definite matrix by CG-type method has been proposed. This method compares to the inverse power method. The given matrices A, and B are assumed to be large and sparse, and SPD( Symmetric Positive Definite) The CG scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for large sparse eigenproblems for smallest eigenvalue. Also, it is very amenable to parallel computations, like the CG method for the linear systems. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. But for parallel computations we need to find an efficient parallel preconditioner. Our candidates we ILU(0) in the wave-front order, ILU(0) in the multi-coloring order, Point-SSOR(Symmetric Successive Overrelaxation), and Multi-Color Block SSOR preconditioner. Wavefront order is a simple way to increase parallelism in the natural order, and Multi-coloring realizes a parallelism of order(N), where N is the order of the matrix. Another choice is the Multi-Color Block SSOR(Symmetric Successive OverRelaxation) preconditioning. Block SSOR is a symmetric preconditioner which is expected to minimize the interprocessor communication due to the blocking. We implemented the results on the CRAY-T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test problem was drawn from the discretizations of partial differential equations by finite difference methods. The results show that for small number of processors Multi-Color ILU(0) has the best performance, while for large number of processors Multi-Color Block SSOR performs the best.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.2
• /
• pp.25-36
• /
• 2020

The Korean government has a plan to mandate zero-energy buildings in 2020 for public and 2025 for private buildings. In order to design a zero-energy building, insulation and airtightness, which are the most basic elements of passive house technology, are required, and the government has been accomplished this through step-by-step strengthening of related standards. In passive house with high thermal insulation and airtightness performance, the heat introduced into the building through solar radiation can be stored for a long time to keep the inside warm during winter. On the other hand, during summer, heat introduced into the building cannot be easily released to outside, so it is necessary to actively block solar radiation and high temperature outdoor air to prevent an increase of indoor temperature. Therefore, this study aims to derive an appropriate operation condition of passive house to maintain the indoor temperature at an suitable level according to the ventilation methods and solar shading conditions. As a result, under the conditions that the outdoor temperature was 28℃ or less, the ventilation using a heat recovery ventilation system at daytime and natural ventilation at nighttime were selected for the most appropriate operation method. In addition, in the case of solar shading, it was found that blocking solar radiation at daytime using the blind and open the blind at nighttime to ensure natural ventilation were selected for the most appropriate solar shading condition.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.159-166
• /
• 2007

The Value Engineering(VE) well known as a way of Productivity Elevation is already the proven and outstanding management method in Construction Industry the inside and outside of country. The Value Engineering in domestic, revised by the method of the Construction Technique - Enforcement Ordinance ("the Examination of Design Economy") in 2005, is usually applicable to the Construction Work which cost over 10 billon won. But It is true that there is some differences between theory and reality to apply the Value Engineering in domestic. Therefore the differences are blocking process to enlarge and supply the VE in domestic. In this Study, through a case-analysis of the recently accomplished Design Value Engineering, we give a careful consideration to the problem and cause. And we are inclined to contribute to a successful stay of the Design Value Engineering in domestic as offering the solution about those.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.146-153
• /
• 2006

It is required to have researches on efficient resource allocation schemes in an integrated voice and data CDMA system with the spreading of high-speed wireless internets. In this paper, we proposed a efficient resouce allocation scheme for providing a high speed data service in an integrated CDMA system. In an integrated voice/data CDMA system, resources for voice users are allocated with high priority and residual resources are allocated to the data service. In this case, it is necessary to use a resource allocation scheme for minimizing interference. In this paper, we first explain about a interference minimizing method and define QoS requirements. Based on the method, we proposed a efficient resource allocation scheme which satisfy the QoS requirements. The proposed scheme controls the transmission rate and delay of data users with a priority information such as the number of packets in a queue. From the simulation results, we show that the proposed scheme reduce the blocking probability and delay and improve the performance.

• Current Photovoltaic Research
• /
• v.3 no.4
• /
• pp.130-134
• /
• 2015

The high efficiency cell research processes through the KF post deposition treatment (PDT) of the $Cu(In,Ga)Se_2(CIGS)$ thin film has been very actively progress. In this study, it CIGS thin film deposition process when KF PDT 300 to the processing temperature, 350, $400^{\circ}C$ changed to soda-lime glass (SLG) efficiency of the CIGS thin film characteristics, and solar cell according to Na presence of diffusion from the substrate the effects were analyzed. As a result, the lower the temperature of KF PDT and serves to interrupt the flow of current K-CIGS layer is not removed from the reaction surface, FF and photocurrent is decreased significantly. Blocking of the Na diffusion from the glass substrate is significantly increased while the optical voltage, photocurrent and FF is a low temperature (300, $350^{\circ}C$) in the greatly reduced, and in $400^{\circ}C$ tend to reduce fine. It is the presence of Na in CIGS thin film by electron-induced degradation of the microstructure of CIGS thin film is expected to have a significant impact on increasing the hole recombination rate a reaction layer is formed of the K elements in the CIGS thin film surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.447-453
• /
• 2004

In this paper, we propose a new system to block harmful Internet information based on IP spoofing. The proposed system is located on a organization's internal network and monitors all outgoing traffic and lets all this traffic go outside. Once the proposed system detects a host's access to a harmful site, it sends the host a pseudo RST packet that pretends to be the response from the harmful site, and prevents the connection between the host and the harmful site. The proposed software system is installed on only a server, and need not be installed on user hosts at all. Thus we can maintain and upgrade the blocking system easily. The performance evaluation of the proposed system shows that it effectively blocks the access to the harmful sites. Since the proposed system is based on IP spoofing, it can be used badly as a hacking tool. Finally we propose some methods to eliminate this possibility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1866-1874
• /
• 2008

Existing web server lowers the whole capacity of system because of the problem on the processing load of server by closing connection increasing code handshake operation, and remarkable decrease of server capacity if it is the state of overload. Also, there occurs disadvantages of increasing connection tine about client's request and response time because handling of client's multi-requests is not smooth because of thread block and it requests a lot of time and resources for revitalization of thread. Therefore, this paper proposes the extended web server which provides the technique for delay handling and improves the overload of server for better system capacity, communication support, and the unification which is the advantage of web service. And it evaluates the existing system(implemented at Tomcat 5.5) and the proposed mobile web server architecture. The extended server architecture provides excellent exchange condition for system capacity and evaluates improved web server architecture which combines multi-thread with thread pool. The proposed web service architecture in this paper got the better result of improved capacity benefit than the evaluation result of original Tomcat 5.5.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.12
• /
• pp.311-318
• /
• 2021

With the rapid development of the Internet of Things(IoT) technology recently, multi-access edge computing(MEC) is emerged as a next-generation technology for real-time and high-performance services. High mobility of users between MECs with limited service areas is considered one of the issues in the MEC environment. In this paper, we consider a vehicle edge computing(VEC) environment which has a high mobility, and propose a task migration algorithm to decide whether or not to migrate and where to migrate using DQN, as a reinforcement learning method. The objective of the proposed algorithm is to improve the system throughput while satisfying QoS(Quality of Service) requirements by minimizing the difference between queueing delays in vehicle edge computing servers(VECSs). The results show that compared to other algorithms, the proposed algorithm achieves approximately 14-49% better QoS satisfaction and approximately 14-38% lower service blocking rate.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.933-940
• /
• 2018

In this paper, we propose a multi-block deep learning structure for improving face recognition rate. The recognition structure of the proposed deep learning consists of three steps: multi-blocking of the input image, multi-block selection by facial feature numerical analysis, and perform deep learning of the selected multi-block. First, the input image is divided into 4 blocks by multi-block. Secondly, in the multi-block selection by feature analysis, the feature values of the quadruple multi-blocks are checked, and only the blocks with many features are selected. The third step is to perform deep learning with the selected multi-block, and the result is obtained as an efficient block with high feature value by performing recognition on the deep learning model in which the selected multi-block part is learned. To evaluate the performance of the proposed deep learning structure, we used CAS-PEAL face database. Experimental results show that the proposed multi-block deep learning structure shows 2.3% higher face recognition rate than the existing deep learning structure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.629-641
• /
• 2019

In order to limit the temperature rise of the structure to a certain level or less while maintaining the aerodynamic shape of solid rocket nozzle by effectively blocking a large amount of heat introduced by the combustion gas of high temperature and high pressure, the heat-resistant materials such as C/C composite having excellent ablation resistance are applied to a position in contact with the combustion gas, and the heat-insulating materials having a low thermal diffusivity are applied to the backside thereof. SiC/SiC composite, which has excellent oxidation resistance, is applied to gas turbine engines and contributes to increase engine performance due to light weight and heat-resistant improvement. Scramjet, flying at hypersonic speed, has been studying the development of C/SiC structures using the endothermic fuel as a coolant because the intake air temperature is very high. In this paper, characteristics, application examples, and development trends of various heat-resistant composites used in solid rocket nozzles, gas turbine engines, and ramjet/scramjet propulsions were discussed.