• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2037-2042
• /
• 2013

A TCO-less palladium (Pd) catalytic layer on the glass substrate was assessed as the counter electrode (CE) in a dye sensitized solar cell (DSSC) to confirm the stability of Pd with the $I^-/I_3{^-}$electrolyte on the DSSC performance. A 90nm-thick Pd film was deposited by a thermal evaporator. Finally, DSSC devices of $0.45cm^2$ with glass/FTO/blocking layer/$TiO_2$/dye/electrolyte(10 mM LiI + 1 mM $I_2$ + 0.1 M $LiClO_4$ in acetonitrile solution)/Pd/glass structure was prepared. We investigated the microstructure and photovoltaic property at 1 and 12 hours after the sample preparation. The optical microscopy, field emission scanning electron microscopy (FESEM), cyclic voltammetry measurement (C-V), and current voltage (I-V) were employed to measure the microstructure and photovoltaic property evolution. Microstructure analysis showed that the corrosion by reaction between the Pd layer and the electrolyte occurred as time went by, which led the decrease of the catalytic activity and the efficiency. I-V result revealed that the energy conversion efficiency after 1 and 12 hours was 0.34% and 0.15%, respectively. Our results implied that we might employ the other non-$I^-/I_3{^-}$electrolyte or the other catalytic metal layers to guarantee the long term stability of the DSSC devices.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.11-20
• /
• 2008

IEEE 802.16e has adopted sleep mode to minimize energy consumption of mobile nodes with high speed mobility. If the Base Station (BS) has no data to be sent to a Mobile Subscriber Station (MSS) at the instant of ending sleep window of the MSS, the MSS increases its sleep window interval by double until the window interval reaches to the maximum sleep window interval. Thus, during the operation of sleep mode, MSS repeatedly performs switch on/off action until there exist frames to be received from BS. The switch on/off operation significantly consumes energy of MSS. To effectively deal with the energy of the MSS, this paper proposes an algorithm which decides the minimum sleep window interval that will be used in next sleep mode based on the current sleep window interval. We evaluate the performance of IEEE 802.16e sleep mode algorithm and our proposed algorithm in terms of energy consumption and blocking probability. Compared with the current sleep mode algorithm used in IEEE 802.16e, the proposed algorithm decreases the energy consumption by about 30% without increasing blocking probability.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.441-449
• /
• 2002

For multimedia traffics to be supported successfully in wireless network environment, it is necessary to provide Qualify-of-Service(QoS) guarantees among mobile hosts(clients). In order to guarantee the QoS, we have to keep the call blocking probability below a target value during hand-off session. However, the QoS negotiated between the client and the network may not be guaranteed due to lack of available channels for traffic of a new cell, since on service mobile clients should be able to continue their sessions. In this paper, we propose an efficient load-balancing algorithm based on the adaptive bandwidth reservation scheme for enlarging available channels in a cell. Proposed algorithm predicts the direction of clients in a cell and adjusts the amount of the channel to be reserved according to the load status of the cell. This method is used to reserve a part of bandwidths of a cell for hand-off calls to its adjacent cells and this reserved bandwidth can be used for hand-off call prior to new connection requests. If the number of free channels is also under a low threshold value, our scheme use a load-balancing algorithm with an adaptive bandwidth reservation. In order to evaluate the performance of our algorithm, we measure metrics such as the blocking probability of new calls and dropping probability of hand-off calls, and compare with those of existing schemes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.12
• /
• pp.1752-1760
• /
• 2005

In this experiment, the effects of cage density (CD) and probiotic supplementation (PS) on laying performance, metabolic profile, and egg quality in peak-producing hens were evaluated. After blocking according to the cage location, Lohman layers (n = 180, 46 wks of age) were allocated randomly to two levels of CD (540 vs. 360 $cm^2$/hen) and three levels of PS (0, 0.15, and 0.30%). Probiotic contained Enterococcus faecium culture (10${\times}$10$^9$ cfu/g). Egg production (EP) and feed consumption (FC) were measured daily; egg weight (EW) was measured bi-weekly; BW was measured before and after the experiment; and blood samples were obtained at the end of the experiment. The data were analyzed using two-way ANOVA. Increasing CD decreased FC (125.0 vs. 120.8 g/d, p<0.0001) and FCR (1.93 vs. 1.87, p<0.0001) and did not alter EP, EW, and BW. Increasing level of PS linearly decreased FC (p<0.02) and FCR (p<0.006). Averages were 123.9, 123.2, and 121.6 g/d for FC and 1.91, 1.92, and 1.86 for FCR in hens supplemented with 0, 0.15, and 0.30% probiotic, respectively. Hens placed in high-density cages had greater serum corticosterone concentration than hens placed in normal-density cages (12.8 vs. 11.3 $\mu$g/dL, p<0.04); CD did not affect concentrations of other metabolites. Increasing level of PS linearly increased serum glucose, albumin, and creatine concentrations and quadratically increased total protein, globulin, Ca, and P concentrations. Average concentrations (mg/dL) were 260, 297, and 305 for glucose; 6.28, 8.09, and 7.58 for total protein; 1.98, 2.48, and 2.38 for albumin; 4.30, 5.62, and 5.19 for globulin; 0.40, 0.52, and 0.54 for creatine; 16.0, 16.5, and 16.3 for Ca; and 6.27, 8.14, and 7.17 for P in hens supplemented with 0, 0.15, and 0.30% probiotic, respectively. There was no effect of CD on egg quality. Increasing level of PS linearly improved yolk color (YC) and quadratically increased albumen index (AI) and Haugh unit (HU). The mean values were 9.67, 9.75, and 10.58 for YC; 8.94, 6.93, and 8.72% for AI; and 85.6, 74.9, and 82.9 for HU for hens supplemented with 0, 0.15, and 0.30% probiotic, respectively. There was also CD by PS effect on FC, EP, and serum glucose, total protein, albumin, globulin, creatine, Ca and P concentrations. In conclusion, increased CD partially depressed laying performance and caused stress. Probiotic supplementation improved laying performance and metabolic profile. It also partially alleviated the adverse effects of stress resulting from increased caging density.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.61-71
• /
• 2007

The instruction level parallelism, which has been used to improve the performance of processors, expose its limit. The change of a control flow by a branch miss prediction is one of the obstacles that restrict the instruction level parallelism. The single chip multiprocessors have been developed to utilize the thread level parallelism. However, we could not use the maximum performance of the single chip multiprocessor in case of executing the coded programs without considering the multi-thread. In order to overcome the two performance degradation factors, in this paper, we suggest the concurrent branch execution method that applies to the multi-path execution method at a single chip multiprocessor. We executes all two flows of the conditional branch using the idle core processor. Through this, we can improve the processor's efficiency with blocking the control flow termination by the branch instruction and reducing the idle time. We analyze the effects of concurrent branch execution proposed in this paper through the simulation. As a result of that, concurrent branch execution reduces about 20% of idle time and improves the maximum 10% of the branch prediction accuracy. We show that our scheme improves the overall performance of maximum 39% compared to the normal single chip multiprocessor and maximum 27% compared to the superscalar processor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.263-268
• /
• 2016

A rapid increase of data amount, used in ship-to-ship transmission of safety and logistics information, ships in the inland sea have trouble transmitting real-time information transmission due to an increase in traffic load caused by data transmitted by land station and offshore ships. In this study, therefore, communication is carried out by adaptively controlling the detailed beam width based on the distribution of offshore ships in land station durable in marine environment. Then after the adaptive sector system enabling real-time communication support between ships concentrated in an inland sea and land station is applied, the performance verification is conducted based on the respective Call Blocking Rates of an omnidirectional antenna, fisted sector system, and adaptive sector system. The performance verification result shows that adaptive sector system has better performance than the fixed sector system as the density of ship, q value, increases, and that the smaller the beam width is, the better performance of adaptive sector system will be.

• Composites Research
• /
• v.37 no.3
• /
• pp.238-245
• /
• 2024

In this study, as part of the development of a monitoring system for the efficient maintenance of steel pipes, an experimental study was conducted to evaluate the performance of steel pipes treated with modified polyethylene coating. In the case of the conventional mechanical pre-coating method, there was a deterioration in polyethylene adhesion during expansion testing, which led to the application of a chemical pre-treatment process using a calcium-mixed phosphate zinc film to resolve this issue. SEM and EDX analyses showed that the densest structure was observed at a Zn/Ca ratio of 1.0, and improved heat resistance compared to the conventional method was confirmed. Additionally, to prevent coating detachment during expansion, an evaluation of adhesion and elongation was conducted on steel pipes with modified polyethylene coating, incorporating materials such as elastomers based on maleic anhydride grafting, metal oxides, blocking agents, and slip agents. Experimental results showed that the specimen (S4) containing all modified materials exhibited more than a 25% performance improvement compared to the specimen (S2) containing only metal oxides. Lastly, the development and performance evaluation of wedge-shaped socketing and pressing wheels, which are part of the pipe fixing accessories, were conducted to prevent surface coating damage on the completed pipes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.129-136
• /
• 2020

A Cut Out Switch (COS) is used for line protection and pole transformer protection in power systems. The COS used to protect the pole transformer is installed on the power side of the pole transformer to protect the electric equipment from fault currents. The COS is composed largely of a body and a fuse holder, and when the fault current is energized, the element of the fuse link in the fuse holder is melted to block the fault current. The arc generated when the COS fuse link is blown causes fire and noise, causing discomfort to residents in the surrounding area, and the arc flame can cause secondary damage to the peripheral device. In this study, a current-limiting COS fuse with improved overcurrent blocking performance rather than explosion type was developed to solve the arc and noise problems during COS operation. The overcurrent breaking performance of the current-limiting COS improves the reliability by developing a striker and COS fuse bracket. In addition, this study aimed to verify the performance of the developed current-limiting COS fuse through a test at an authorized institution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1271-1276
• /
• 2004

For Exp. 1, one hundred twenty Duroc${\times}$ Yorkshire${\times}$Landrace pigs (6.34${\pm}$ 0.70 kg average initial BW) were used in a 35 d growth assay. There were six pigs per pen and four pens per treatment. Dietary treatments included 1) NC (negative control; basal diet), 2) PC (positive control; added 5% HP $300^{(R)}$, HAMLET PROTEIN A/S, as protein source), 3) PSP 2.5 (added 2.5% $Pepsoygen^{(R)}$, Genebiotech Co. Ltd., as protein source), 4) PSP 5.0 (added 5% $Pepsoygen^{(R)}$ as protein source), and 5) PSP 7.5 (added 7.5% $Pepsoygen^{(R)}$ as protein source). For d 21, ADFI was increased in pigs fed PSP diets compared with PC diet (p<0.05). ADG was tended to improve as concentration of PSP in the diets was increased. For d 21-35 and entire experimental period, pigs fed PSP diets had more feed intake than pigs fed NC or PC diets (p<0.05). For the whole period, ADG was improved in PSP treatments compared with NC treatment (Linear effect, p=0.05). On d 21 and d 35, digestibilities of DM and N were higher (p<0.05) for pigs fed PSP diets than pigs fed NC diet and PSP 2.5 treatment was the highest among the treatments. On d 21, digestibility of N was significantly improved in PSP treatments compared with PC treatment (p<0.05). For Exp. 2, five Duroc${\times}$Yorkshire${\times}$Landrace barrows (8.74${\pm}$0.22 kg average initial BW) were surgically fitted with a simple T-cannulas approximately 15 cm prior to the ileo-cecal junction. The experimental designs were 5${\times}$5 latin squares with pigs and periods as blocking criteria. Dietary treatments were same as Exp.1. Generally, apparent ileal digestibilities of DM and N were higher for pigs fed PSP diets than pigs fed NC or PC diets (p<0.05) and PSP 5.0 and 2.5 treatments were the highest among the treatments, respectively. Apparent ileal digestibilities of the whole amino acids were increased in PSP treatments compared with NC treatment (Quadratic effect, p${\leq}$0.05). Also, histidine, lysine and threonine digestibilities in essential amino acids and alanine, asparatic acid and glycine digestibilities in non essential amino acids were significantly higher for pigs fed PSP diets than pigs fed PC diets (p${\leq}$0.05). In conclusion, feeding processed soy protein to weanling pigs increased growth performance, nutrient digestibility and apparent ileal digestibilities of DM, N and most amino acids.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.3
• /
• pp.468-491
• /
• 2015

The major objective of this research is to suggest the proactive strategy and management of public R&D for the active transfer of technology based on the influential factor analysis of technology transfer. This study identified influential factors which make the greatest impact on the success of public technology transfer and commercialization through three points of view-technology supplier's view, technology adopter's view and view of commercialization-which contribute to successful technology transfer and commercialization. The core influential variables for blocking technology transfer are identified such as additional technological development, search for technology adopter followed by mass production technology and testing of confidence. Technology adopter is to create new markets or expand existing markets through the superiority (innovation) of licensing technology, increasing the internal innovation capabilities and maximizing the impacts of technology. This research suggests two effective strategies for improving technology transfer such as technology planning and marketing in the view of technology license. The strategy of technology planning should be established and executed to meet both technology trends and adopter's needs. And strong patents should be secured in terms of licensing of technology. Also the technological performance should be evaluated at mid-term appraisal, confirming the needs of adopter and competitive advantage of technology and patent. In addition to this, the customized technology marketing strategy for different fields of applications is also required in order to improve the likelihood of technology transfer. If the performance of R&D organization could be evaluated by global technological competitiveness and spillover effects of commercialization rather than quantitative output, the flow of technology transfer and commercialization would be accelerated.