• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.91-94
• /
• 2018

We develop a time-temperature indicator (TTI) that can determine whether thawing of fish and other fishery products has occurred during frozen storage. A polypropylene tube with an internal diameter of 3 mm was prepared and cut to a length of 14 to 20 mm. One end of the tube was thermally sealed and 0.1% acetic acid was injected into the other end; the tube was then frozen at $20^{\circ}C$. Then the open side of the frozen tube was blocked by sinking the tube into a 10% gelatin solution. The tube was attached to a polyvinyl packaging bag along blue litmus paper and the bag was put into a freezer at $-20^{\circ}C$. After freezing, the bag was removed to an ambient temperature of $20^{\circ}C$, and the time dependence of the color change of the litmus paper was observed. The color changed from blue to red, with the length of the red region increasing with time. Our TTI can be used as a part of a visible detection system and the detection program can conduct the elapsed time analysis on the length of the red region of the litmus paper indicating the degree of thawing. Thus, the TTI is a useful tool in the temperature management of frozen fish and fishery products.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.85-88
• /
• 2012

Studies on the effects of layered silicate content on the AC electrical treeing and breakdown behaviors of epoxy/layered silicate nanocomposites were carried out in needle-plate electrode geometry. Wide-angle X-ray diffraction (WAXD) analysis and transmission electron microscopy (TEM) observation showed that 1 wt% of the multilayered silicate was fully exfoliated into nano-sized monolayers in the epoxy matrix however, over 3 wt% of the silicate was in an intercalated state. When 1 wt% layered silicates were incorporated, an electrical tree was initiated in 439 min and propagated at a speed of 2.3 ${\mu}m$/min after applying 781.4 kV/mm, representing a decreased in starting initiation time by a factor of 11.0 and increase in propagation speed by a factor 8.2 in comparison with neat epoxy resin. These values were in great decline after the layered silicate content was increased to 3wt% which implies that the exfoliated silicate blocked the tree initiation and propagation processes effectively. However the effect was largely decreased in the intercalated state.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.257-260
• /
• 2002

This study is intended is to analyze the blocking performance with variation of the gap of bar and kinds of metal lath for construction joint when placing concrete. According to the results, passing ratio of concrete increases with increase of vibrating time. In the case of W/C 50%, when blocking concrete with bar of D10 and D20 which the gap of bar is below 200mm, or metal lath, passing ratio of concrete is below 10%, so blocking performance is favorable. In the case of W/B 30%, while concrete does not flow out without vibration at slump 21mm, concrete flows out at some degree before vibration at slump flow 65mm and then, as 5 seconds passes after first vibration, final passing ratio shows about 85~90%. When blocking concrete by bar D10 of the gap 20mm, bar D20 of the gap 10mm and metal lath, it is thought that concrete can be blocked effectively because final passing ratio is below 10%.

• Journal of the Korean Mathematical Society
• /
• v.35 no.3
• /
• pp.691-712
• /
• 1998

We consider an M$_1$, M$_2$/G/1/ K retrial queueing system with a finite priority queue for type I calls and infinite retrial group for type II calls where blocked type I calls may join the retrial group. These models, for example, can be applied to cellular mobile communication system where handoff calls have higher priority than originating calls. In this paper we apply the supplementary variable method where supplementary variable is the elapsed service time of the call in service. We find the joint generating function of the numbers of calls in the priority queue and the retrial group in closed form and give some performance measures of the system.

• Journal of computational fluids engineering
• /
• v.9 no.2
• /
• pp.62-69
• /
• 2004

The present work solved 3D incompressible RANS equations on a rotating, multi-blocked grid system to efficiently analyze ducted marine propulsor with the interaction of propeller guidevane and annular duct. To handle the interface boundary between the guidevane and the propeller, a sliding multiblock technique based on the cubic spline interpolation was applied. To validate the present code, a turbine flow was simulated and the time-averaged pressure coefficients were compared with experiment. After the code validation, the flowfield around a ducted marine propeller with pre-swirl guidevane was simulated.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.57-60
• /
• 2001

In order to extend the life time of building and civil infra-structure, nowadays, patch type fibrous composite materials are widely used. Retrofitted concrete columns and beams gain the stiffness and strength, but they lose toughness and show brittle failure. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, We try to detect peel out effect and find the strain difference between main structure and retrofitting patch material when they separate each other.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.924-931
• /
• 2016

In this paper, Various network adaptive MAC scheduling technique is proposed to effectively overcome limits of narrow bandwidth and low transmission speed in underwater. UPFC(Underwater Packet Flow Control) is a technique to reduce both the number of transmission and transmission time using three types (Normal, Blocked, Parallel) of data transmission. In this technique, the load information, in which a transmission node have, is transmitted to destination node using marginal bit in reserved header. Then the transmitted information is referred to determine weighting factor. According to the weighting factor, scheduling is dynamically changed adaptively. The performance of UPFC is analyzed and flow control technique which can be applied to Cluster Based Network and Ad Hoc network as well.

• Journal of the Korean Society of Costume
• /
• v.28
• /
• pp.205-212
• /
• 1996

This paper is to study the characteristics of fabrics dyed with astringent unripe persimmon juice. The cotton silk rayon and nylon fabrics were dyed with astringet unripe persimmon juice. The structures of natural fabrics dyed fabrics and dyed fabrics followed by washing were examined by scanning electron mi-croscopy. Surface reflexibility of VIS trans-mittance of UV VIS and NIR were analyzed. The study conclues as follows: 1. Colour of cotton fabrics dyed with persim-mon juice became darkended as a function of exposing time to sunlight. That colour was chaged after washing. 2. Blocking effect of ultraciolet light and visible ray was increased in all dyed fabrics. Especially dyed cotton fabric blocked UV light perfectly and the blocking effect was still remained after 9 washings. 3. Persimmon juice dyeing produced coating effect to fabrics besides dyeing effect accord-ing to the scanning electron micrographs. In a word the cotton fabric dyed with per-simmon juice has blocking effect of UV light stiffness. Therefore I think persimmon juice dyeing is a very useful textile finishing and ex-pect a wide application of the technique in fu-ture.

• Communications of the Korean Mathematical Society
• /
• v.11 no.2
• /
• pp.481-493
• /
• 1996

We consider a retrial queue with two classes of customers where arrivals of class 1(resp. class 2) customers are MMPP and Poisson process, respectively. In the case taht arriving customers are blocked due to the channel being busy, the class 1 customers are queued in priority group and are served as soon as the channel is free, whereas the class 2 customers enter the retrial group in order to try service again after a random amount of time. We consider the following retrial rate control policy, which reduces their retrial rate as more customers join the retrial group; their retrial times are inversely proportional to the number of customers in the retrial group. We find the joint generating function of the numbers of custormers in the two groups by the supplementary variable method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1024-1027
• /
• 1996

The cyclic production lines have the first machines starved and the last machine blocked due to the lack or the excess of empty pallets in the feedback buffer. A workpiece in the cyclic production lines is transported on a pallet, and the total sum of pallets in the system does not changed during the system operation time. Therefore, the production rate of the cyclic production lines are dependent on the total number of pallets in the system. In this paper, we suggest the performance analysis method for the cyclic production lines with inspection machines and the optimal total number of pallets in the system that maximizes the production rate of the system. Finally, we validate the suggested methods by simulations.