• Title/Summary/Keyword: blockage effects

Search Result 141, Processing Time 0.033 seconds

Evaluation of Hygienic Properties and Effects of Printing on Curcuma- and Coffee-Dyed Cotton Fabrics (강황, 커피염색 면직물의 위생학적 성능과 Printing의 영향 평가)

  • Park, Soon Ja
    • The Korean Journal of Community Living Science
    • /
    • v.28 no.1
    • /
    • pp.143-154
    • /
    • 2017
  • This study was conducted to develop fabrics using non-toxic and eco-friendly natural dyes made from curcuma and coffee extract. The natural dyes were applied to non-printed cotton fabrics using the dip dyeing method, and the pattern was hand-printed onto the dyed fabrics to make dyed printed-fabrics. The four types of developed fabric samples were compared to analyze the effects of the dyeing materials and printing on the hygienic properties of curcuma- and coffee-dyed fabrics. The findings were as follows. First, air permeability of both curcuma- and coffee-dyed fabrics was greatly affected by the presence of patterns, although the type of dye did not seem to have an effect. Printing greatly reduced air permeability of the fabric, and coffee-dyed fabric showed greater reduction of dyeing method than curcuma-dyed fabric. Moisture regain also tended to decrease with printing, but the change was much smaller compared to air permeability. Second, increased UV blockage was observed in curcuma- and coffee-dyed fabrics with patterns compared to non-printed fabrics, showing that printing enhanced UV blocking. Third, deodorization rate tended to increase sharply for both curcuma- and coffee-dyed fabrics until 30 minutes and gradually increased thereafter to yield 30% for curcuma and 50% for coffee at 120 minutes, demonstrating higher deodorization of coffee dye. Coffee-dyed fabric showed an antibacterial rate about twice as high as that of curcuma-dyed fabric, and the observed data suggest that curcuma-dyed fabric had an insignificant level of antibiosis. Fourth, printing significantly enhanced wash, sunlight, and compound colorfastness of the two types of dyed fabrics. The effect of printing was most dramatic on sunlight and compound colorfastness, which are aspects in which natural dyed fabrics perform poorly in general. Eventually, the development and application of biologically- and environmentally-friendly fabrics with natural dyes correspond with increased interest towards the wellness and healthy attitudes of modern society.

The Effects of Yunpyesan on Cell Proloferation, Apoptosis and Cell Cycle Progression of Human Lung Cancer A549 Cells (윤폐산에 의한 폐암세포 증식억제기전에 관한 연구)

  • Kang Yun-Keong;Park Dong Il;Lee Jun Hyuk;Choi Yung Hyun
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.16 no.4
    • /
    • pp.745-755
    • /
    • 2002
  • To examine the effects of Yunpyesan on the cell proliferation of A549 human lung carcinoma cell line, we performed various experiments such as dose-dependent effect of Yunpyesan on cell proliferation and viability, morphological changes, quantification of apoptotic cell death and alterations of apoptosis/cell cycle-regulatory gene products. Yunpyesan declined cell viability and proliferation in both a dose- and a time-dependent manner. The anti-proliferative effect by Yunpyesan treatment in A459 cells was associated with morphological changes such as membrane shrinking and cell rounding up. Yunpyesan Induced apoptotic cell death in a time-dependent manner, which was associated with degradation of poly-(ADP-ribose) polymerase (PARP), an apoptotic target protein, without alterations of the balance between Bcl-2 and Bax expressions. DNA flow cytometric histograms showed that population of G1 phase of the cell cycle was increased by Yunpyesan treatment in a dose-dependent manner. Western blot analysis revealed that cyclin D1 and A were reduced by Yunpyesan treatment, whereas cyclin dependent kinase (Cdk) inhibitor p27 was markedly increased in a time-dependent fashion. The level of tumor suppressor p53 proteins was also increased by Yunpyesan treatment and its increase might be linked to increase of Cdk inhibitor p27. In addition, Mdm2, negative regulator of p53, was down-regulated by Yunpyesan treatment. Since the expression of retinoblastome protein (pRB), a key regulator of G1/S progression, was reduced by Yunpyesan treatment, we supposed that phosphorylation of pRB might be also blocked. The present results indicated that Yunpyesan-induced inhibition of lung cancer cell proliferation is associated with the induction of apoptosis and the blockage of G1/S progression.

Induction of Apoptotic Cell Death by Insamsapye-tang Extract in Human Lung Cancer A549 Cells (인삼사폐탕 추출물에 의한 인체 폐암세포의 Apoptosis 유도 기전에 관한 연구)

  • Park Cheol;Lee Min Woo;Kim Won Il;Lee Won Ho;Park Dong Il;Choi Yung Hyun
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.17 no.3
    • /
    • pp.677-683
    • /
    • 2003
  • We investigated the effects of Insamsapye-tang (ISSPT) water extract on the growth of human lung carcinoma A549 cells. Upon treatment with ISSPT extract, a concentration-dependent inhibition of cell viability was observed and cells developed many of the hallmark features of apoptosis, including condensation of chromatin. Flow cytometry analysis confirmed that ISSPT treatment increased populations of apoptotic-sub G1 phase. In addition, proteolytic degradation of poly(ADP-ribose) polymerase (PARP) and β-catenin protein were observed after treatment of ISSPT extract. These apoptotic effects of ISSPT in A549 cells were associated with marked inhibition of Bel-xL expression in a dose-dependent manner, however the levels of Bcl-2 and Bax expression were not affected. ISSPT treatment also induced the expression of tumor suppressor p53 mRNA and inhibited the expression of caspase-3 mRNA. The previous and present results indicated that ISSPT-induced inhibition of lung cancer cell proliferation is associated with the blockage of G1/S progression and the induction of apoptosis.

Effects of the Inlet Boundary Layer Thickness on the Flow in an Axial Compressor (I) - Hub Corner Stall and Tip Leakage Flow - (입구 경계층 두께가 축류 압축기 내부 유동에 미치는 영향 (I) - 허브 코너 실속 및 익단 누설 유동 -)

  • Choi, Min-Suk;Park, Jun-Young;Baek, Je-Hyun
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.29 no.8 s.239
    • /
    • pp.948-955
    • /
    • 2005
  • A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the internal flow in a low-speed axial compressor operating at the design condition($\phi=85\%$) and near stall condition($\phi=65\%$). At the design condition, the flows in the axial compressor show, independent of the inlet boundary layer thickness, similar characteristics such as the pressure distribution, size of the hub comer-stall, tip leakage flow trajectory, limiting streamlines on the blade suction surface, etc. However, as the load is increased, the hub corner-stall grows to make a large separation region at the junction of the hub and suction surface for the inlet condition with thick boundary layers at the hub and casing. Moreover, the tip leakage flow is more vortical than that observed in case of the thin inlet boundary layer and has the critical point where the trajectory of the tip leakage flow is abruptly turned into the downstream. For the inlet condition with thin boundary layers, the hub corner-stall is diminished so it is indistinguishable from the wake. The tip leakage flow leans to the leading edge more than at the design condition but has no critical point. In addition to these, the severe reverse flow, induced by both boundary layer on the blade surface and the tip leakage flow, can be found to act as the blockage of flows near the casing, resulting in heavy loss.

Induction of S phase Arrest of the Cell Cycle by Oak Smoke Flavoring (Holyessing) in Human Prostate Carcinoma Cells (인체 전립선 암세포에서 참나무 목초액에 의한 세포주기 S기 arrest 유발에 관한 연구)

  • Park Cheol;Lee Won Ho;Choi Byung Tae;Kim Kyoung Chul;Lee Yong Tae;Choi Yung Hyun
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.17 no.5
    • /
    • pp.1309-1314
    • /
    • 2003
  • We examined the effects of Oak Smoke Flavoring (OSF, Holyessing) on the cell proliferation of DU145 and PC3 human prostate carcinoma cell line. OSF treatment resulted in a concentration-dependent inhibition of the cell viability in both DU145 and PC3 cell lines. The anti-proliferative effects by OSF treatment in DU145 and PC3 cells were associated with morphological changes such as membrane shrinking and cell rounding up. DNA flow cytometric histograms showed that population of S phase of the cell cycle was increased by OSF treatment in a dose-dependent manner. Western blot analysis revealed that cyclin B1 and cdc2 proteins were reduced by OSF treatment in DU145 cells, whereas cyclin A was markedly inhibited in PC3 cells. Furthermore, we observed an increase of Cdk inhibitor p16 and p27 protein, and an inhibition of phosphorylation of pRB by OSF treatment in a dose-dependent manner. The present results indicated that OSF-induced inhibition of human prostate carcinoma cell proliferation is associated with the blockage of S phase progression.

Induction of Apoptotic Cell Death by Sabaek-san Extract in Human Lung Cancer A549 Cells (사백산 추출물에 의한 인체 폐암세포의 Apoptosis 유도 기전에 관한 연구)

  • Lee Jae Hun;Kang Byong Ryeung;Kam Cheol Woo;Park Dong Il;Choi Yung Hyun
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.17 no.2
    • /
    • pp.451-456
    • /
    • 2003
  • We investigated the effects of Sabaek-san (SBS) water extract on the growth of human lung carcinoma A549 cells. Upon treatment with SBS extract, a concentration-dependent inhibition of cell viability was observed and cells developed many of the hallmark features of apoptosis. including condensation of chromatin. Flow cytometry analysis confirmed that SBS treatment increased populations of apoptotic-sub G1 phase. In addition. proteolytic cleavages of poly(ADP-ribose) polymerase and β-catenin protein were observed after treatment of SBS extract. These apoptotic effects of SBS in A549 cells were associated with marked inhibition of Bcl-2 and Bel-xL mRNA in a dose-dependent manner. however the levels of Bax expression were not affected, SBS treatment also induced a proteolytic activation of caspase-3. which is believed to play a central role In the apoptotic signaling pathway. The previous and present results indicated that SBS-induced inhibition of lung cancer cell proliferation is associated with the blockage of G1/S progression and the induction of apoptosis.

Protective Effects of Lipophilic Extracts from Different Colored Paprikas on Inhibition of $H_2O_2$-induced Gap Junctional Intercellular Communications ($H_2O_2$로 유도된 WB-F344 세포의 GJIC 억제에 대한 색상별 파프리카 추출물의 보호 효과)

  • Kim, Ji-Sun;Kim, Suna
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.24 no.3
    • /
    • pp.359-367
    • /
    • 2014
  • This study analyzed phytochemicals, including various carotenoids, tocopherol and L-ascorbic acid, in green, yellow and orange paprikas (GP, YP and OP) and measured the preventive effects of lipophilic extracts from different colored paprikas on the blockage of gap junctional intercellular communication (GJIC), which is known as a cellular event associated with tumor promotion. Main carotenoids were lutein and ${\beta}$-carotene in GP, lutein, ${\beta}$-carotene, capsanthin, violaxanthin, ${\beta}$-carotene and capsorubin in YP, and lutein, ${\beta}$-carotene, cryptoxanthin and zeaxanthin in OP. Total carotenoid contents were $65.54{\pm}15.87$ mg/100 g dw in OP, $11.98{\pm}0.69$ mg/100 g dw in YP and $10.30{\pm}1.43$ mg/100 g dw in GP. Tocopherol contents were highest in GP compared with in YP and OP, whereas L-ascorbic acid contents were very high in all paprikas. We determined the non-cytotoxic levels of paprika extracts by MTT assay, which showed less formation of reactive oxygen species (ROS) induced by $500{\mu}M$ $H_2O_2$ for 1h. Finally, we showed that pretreatment of paprika extracts prevented inhibition of GJIC induced by $500{\mu}M$ $H_2O_2$ by the scrape-loading/dye-transfer technique. In conclusion, each colored paprika has unique phytochemicals and showed a protective effect on inhibition of GJIC.

Air-Water Flooding in Multirod Channels : Effects of Spacer Grids and Blockages (다봉채널내의 공기-물 플러딩 : 스페이서 그릿 및 블럭키지의 영향)

  • Cha, Jong-Hee;Jun, Hyung-Gil
    • Nuclear Engineering and Technology
    • /
    • v.25 no.3
    • /
    • pp.381-393
    • /
    • 1993
  • This paper presents the experimental results on flooding of countercurrent flow in vertical multirod channels, which consists of falling water film and upward air flow. In particular, the effects of spacer grids, with and without mixing vane, and of blockage in the multirod bundle on the behaviour of flooding were investigated. The 5$\times$5 zircaloy tube bundle was used for the test section. The comparison of previous analytical models and empirical correlations with present data on flooding showed that the existing models and correlations predict much higher flooding curves. The spacer grid causes the lower flooding air flow rate to compare with the bare rod bundle. However, the mixing spacer grids need a higher flooding air flow rate for a constant liquid flow rate than the spacer grids without mixing vanes. The bundle containing blockages has the highest flooding air flow rate among the bundles with spacer grids and blockages. Empirical flooding correlations for the three types of test section have been made.

  • PDF

The Selective Oxidation of CO in Hydrogen Rich Stream over Alumina Supported Cu-Ce Catalyst (알루미나에 담지된 Cu-Ce 촉매상에서의 개질수소가스에 포함된 CO의 선택적 산화 반응에 관한 연구)

  • Park, J.W.;Jeong, J.H.;Yoon, W.R.;Lee, Y.W.
    • Journal of Hydrogen and New Energy
    • /
    • v.14 no.2
    • /
    • pp.155-170
    • /
    • 2003
  • $Cu-Ce/{\gamma}-Al_2O_3$ based catalysts were prepared and tested for selective oxidation of CO in a $H_2$-rich stream(1% CO, 1% $O_2$, 60% $H_2$, $N_2$ as balance). The effects of Cu loading and weight ratio(=Cu/(Cu+Ce)) upon both activity and selectivity were investigated upon the change in temperatures, It was also examined how the activity and selectivity of catalysts were varied with the presence of $CO_2$ and $H_2O$ in the reactant feed. Among the various Cu-Ce catalysts with different catalytic metal composition, Cu-Ce(4 : 16 wf%) /${\gamma}-Al_2O_3$ catalyst showed the highest activity(>$T_{99}$) and selectivities(50-80%) under wide range of temperatures($175-220^{\circ}C$). However, in the Cu-Ce(4 : 16 wt%)/ ${\gamma}-Al_2O_3$, the presence of $CO_2$ and $H_2O$ in the reactant feed decreased the activity and the maximum activity(>$T_{99}$) in terms of reaction temperature moved by about $25^{\circ}C$ toward higher temperature, the $T_{>99}$ window was seen between $210-230^{\circ}C$ (selectivity 50-75%). From $CO_2-/H_2O-TPD$, it can be concluded that the main cause for the decrease in catalytic activity may be attributed to the blockage of the active sites by competitive adsorption of water vapor and $CO_2$ with the reactant at low temperatures.

Measurements on Effects of Locations of Obstacles in an Explosion Chamber

  • Han, Jae-Beom;Lee, Young-Soon;Park, Dal-Jae
    • Journal of the Korean Institute of Gas
    • /
    • v.12 no.3
    • /
    • pp.68-74
    • /
    • 2008
  • Measurements were performed to investigate the effects on flame and pressure development by varying locations of multiple obstacles in a top-venting explosion chamber. The chamber dimension was 1000 mm in height with a $700\;{\times}\;700\;mm^2$ cross-section and a rectangular vent area of $700\;{\times}\;700\;mm^2$. Three different multiple obstacles with blockage ratio of 30% were used by changing from 200 mm, 500 mm to 800 mm in heights within the chamber. Temporally resolved flame front images were recorded by a high speed camera to investigate the interaction between the propagating flame and the obstacles. The results showed that the triangular bar caused the fastest flame developments at given times whereas the lowest was obtained with the cylindrical bar. It was also found that local flame displacement speeds of different obstacles were sensitive to the locations of obstacles. The local speed becomes larger in going from 200 mm, to 500 mm and to 800 mm in heights. The obstacles in height of 800 mm yielded the highest overpressure whereas the lowest was in height of 200 mm.

  • PDF