• Title/Summary/Keyword: block size

Search Result 1,413, Processing Time 0.028 seconds

Implementation of High-Throughput SHA-1 Hash Algorithm using Multiple Unfolding Technique (다중 언폴딩 기법을 이용한 SHA-1 해쉬 알고리즘 고속 구현)

  • Lee, Eun-Hee;Lee, Je-Hoon;Jang, Young-Jo;Cho, Kyoung-Rok
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.4
    • /
    • pp.41-49
    • /
    • 2010
  • This paper proposes a new high speed SHA-1 architecture using multiple unfolding and pre-computation techniques. We unfolds iterative hash operations to 2 continuos hash stage and reschedules computation timing. Then, the part of critical path is computed at the previous hash operation round and the rest is performed in the present round. These techniques reduce 3 additions to 2 additions on the critical path. It makes the maximum clock frequency of 118 MHz which provides throughput rate of 5.9 Gbps. The proposed architecture shows 26% higher throughput with a 32% smaller hardware size compared to other counterparts. This paper also introduces a analytical model of multiple SHA-1 architecture at the system level that maps a large input data on SHA-1 block in parallel. The model gives us the required number of SHA-1 blocks for a large multimedia data processing that it helps to make decision hardware configuration. The hs fospeed SHA-1 is useful to generate a condensed message and may strengthen the security of mobile communication and internet service.

The growth and productivity of native Indonesian rice progenies and its relationship with root development during dry-season

  • Zakaria, Sabaruddin;Fitrya, Farid;Kurniawan, Trisda;Hereri, Agam Ihsan;Maulana, Teuku
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.338-338
    • /
    • 2017
  • One of the problems in increasing rice production is getting lines or varieties that have high adaptability so that able to produce maximum production in a variety of environmental conditions. One strategy that can be done to get adaptive varieties is through the improvement of native varieties. This research was conducted in rain fed paddy field, Aceh province, Indonesia from June to September 2014. The texture of the soil was clay-loam with the soil pH ranged from 6.5-6.7. Five potential progenies of rice from crossing between native Indonesian rice with introduced rice varieties consist of C3, C4, S3, S5, S6 were used in this study. Besides that, one national rice variety Ciherang also used as a comparison. The plants were growth in the plot with the size of $2m{\times}1.4m$ with plant distance was $20cm{\times}20cm$. The fertilizers used in this study were Urea, NPK, and KCl. Randomized block design with 6 rice progenies/variety and 3 replications were used in this study. There were 18 experimental units and each experimental unit had 10 samples for the sources of data. The variables that were observed in this study including plant height at harvesting time, number of productive tiller, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per hectare. Analyzed were also conducted for the depth of root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio and its correlation with the weight of filled grain per hill. The research results show that there was significant difference on plant height at harvesting time, number of productive tillers, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per ha (p>0.01) among the treatments. In addition, depth root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio also had significant difference (p>0.01) among the treatment. The highest plant at harvesting time was found in S6, reaching 129.8 cm and the shortest plants was found in C3 reaching 107.5 cm. The largest number of productive tillers and the highest percentage of filled grains per panicle were found in Ciherang reaching 10.5 tillers and 80.7% respectively. Ciherang also had the heaviest weight of filled grains per hill and per plot reaching 21.1 g and 2.18 kg respectively. Whereas, S6 had the lowest number of tillers and the lowest percentage of filled grain per panicle.. The highest yield potential per ha was found in Ciherang reaching 7.79 tons. Among the progenies, S5 had the highest yield potential reaching 5 tons/Ha. The result also showed significant relationship between shoot-root weight ratio with weight of filled grains per hill. The highest value of shoot-root weight ratio (1.57) in Ciherang is thought had closed relationship with its yield potential.

  • PDF

Titanium Hemostatic Clip Tailoring Method to Overcome Vessel Caliber Discrepancy in Interposition Saphenous Vein Graft for Carotid Artery Resection (경동맥 절제술 후 재건에 사용된 복재정맥의 혈관구경 불일치를 극복하기 위한 Titanium Hemostatic Clip 봉합방법)

  • Kim Sun-Ho;Lim Young-Chang;Lee Sei-Young;Lim Jae-Yol;Choi Eun-Chang
    • Korean Journal of Head & Neck Oncology
    • /
    • v.20 no.2
    • /
    • pp.177-180
    • /
    • 2004
  • Objectives: To completely excise a malignant tumor which invades carotid artery walls, the resection and reconstruction of the carotid artery is essentially required. In most of the cases, interposition graft using a saphenous vein has been performed, however the vessel caliber discrepancy between a common carotid artery and the saphenous vein can result in a problem on surgical technique. We have introduced and evaluated a new titanium hemoclip tailing method to overcome vessel caliber discrepancy in interposition saphenous vein graft for carotid artery resection in the treatment of head and neck cancers. Method: After carotid artery resection, the calibers of the proximal common carotid artery and the vein were compared, and an orifice of the common carotid artery was gradually reduced to a little larger than or the same size as the orifice of the vein by using the titanium hemostatic clip. Subsequently, the common carotid artery was connected to the vein through anastomosis. The same method was also applied to the distal anastomosis site. There after, the vessels were connected through the anastomosis, and a circulation was restored by releasing a vascular clamp. Then, a titanium hemostatic clip-applied redundant portion on the outside of carotid artery was sutured by the blanket edge suture method, using 6-0 Prolene. Results: We have experienced this method in two patients with recurrent squamous cell carcinoma and neuroblostoma, respectively. The interposition saphenous vein graft of these patients was found to maintain good patency on the follow up angiography after one year, and they had no specific vascular complication, such as atherosclerosis. Conclusion: This method made it possible to simply perform the interposition saphenous vein graft (ISVG) within a short time and, therefore, was very useful for shortening the duration to block circulation.

Optimization of Electro-Optical Properties of Acrylate-based Polymer-Dispersed Liquid Crystals for use in Transparent Conductive ZITO/Ag/ZITO Multilayer Films (투명 전도성 ZITO/Ag/ZITO 다층막 필름 적용을 위한 아크릴레이트 기반 고분자분산액정의 전기광학적 특성 최적화)

  • Cho, Jung-Dae;Kim, Yang-Bae;Heo, Gi-Seok;Kim, Eun-Mi;Hong, Jin-Who
    • Applied Chemistry for Engineering
    • /
    • v.31 no.3
    • /
    • pp.291-298
    • /
    • 2020
  • ZITO/Ag/ZITO multilayer transparent electrodes at room temperature on glass substrates were prepared using RF/DC magnetron sputtering. Transparent conductive films with a sheet resistance of 9.4 Ω/㎡ and a transmittance of 83.2% at 550 nm were obtained for the multilayer structure comprising ZITO/Ag/ZITO (100/8/42 nm). The sheet resistance and transmittance of ZITO/Ag/ZITO multilayer films meant that they would be highly applicable for use in polymer-dispersed liquid crystal (PDLC)-based smart windows due to the ability to effectively block infrared rays (heat rays) and thereby act as an energy-saving smart glass. Effects of the thickness of the PDLC layer and the intensity of ultraviolet light (UV) on electro-optical properties, photopolymerization kinetics, and morphologies of difunctional urethane acrylate-based PDLC systems were investigated using new transparent conducting electrodes. A PDLC cell photo-cured using UV at an intensity of 2.0 mW/c㎡ with a 15 ㎛-thick PDLC layer showed outstanding off-state opacity, good on-state transmittance, and favorable driving voltage. Also, the PDLC-based smart window optimized in this study formed liquid crystal droplets with a favorable microstructure, having an average size range of 2~5 ㎛ for scattering light efficiently, which could contribute to its superior final performance.

Correction of Recurrent Ingrowing Toenail Using Partial Matricectomy and Paronychial Advancement Flap (부분기질절제술과 발톱주위전진피판을 이용한 재발성 내증식발톱의 교정)

  • Kim, Eui Sik;Kim, Sung Nam;Noh, Bok Kyun;Hwang, Jae Ha;Kim, Kwang Seog;Lee, Sam Yong
    • Archives of Plastic Surgery
    • /
    • v.33 no.3
    • /
    • pp.347-352
    • /
    • 2006
  • Ingrowing toenail has been treated conventionally by various surgical treatment modlities. However, none of these procedures are perfect to achieve esthetic results with low cost, recurrence, and complication rates. Although mild cases can be treated conservatively, in severe recurrent cases, surgical treatment is preferred. The purpose of this study is to evaluate the effectiveness and safety of using partial matricectomy and paronychial advancement flap for correction of recurrent ingrowing toenail. Eight patients suffering from recurrent ingrowing toenail were operated using partial matricectomy and paronychial advancement flap in our department from August 2004 to August 2005. The number of recurrent episodes ranged from 2 to 5. With digital nerve block, the excision area was marked on nailplate and inflammed lateral nail fold. The horizontally designed paronychial flap considering defect size was effective for wide exposure of the neighboring germinal matrix, which is later to be completely excised or cauterized because remnant germinal matrix made postoperative spicule formation. The nailplate on the affected side was removed about 3-5 mm width longitudinally, being cautious not to damage the proximal dorsal nail fold. The same width of the sterile matrix including germinal matrix was excised longitudinally with inflammed granulation tissue and partial lateral nail fold on the affected side. The subcutaneously elevated paronychial flap was advanced to cover the defect and was anatomically sutured with 5-0 nylon sutures. We evaluated our procedure's effectiveness by examining some factors such as cosmetic results, recurrence, spicule formation, postoperative pain and duration of return to normal activities. In eight patients, no complication was observed such as recurrence, severe pain and spicule formation except for 1 case of infection. Postoperative discomfort was minimal. Average duration of return to normal activities was 12 days. Cosmetically the results were acceptable in all patients. The partial matricectomy and paronychial advancement flap for correction of recurrent ingrowing toenail were found to be technically simple, efficient procedure with a relative low recurrence rate and better cosmetic results.

Architectural characteristics of Nakseonjae through Comparisons with Hanyang's Upper-Class Houses in Late Joseon Dynasty (조선후기 한양의 상류주택과 비교를 통한 낙선재의 건축특성 연구)

  • Cho, Kyu-Hyung
    • Journal of architectural history
    • /
    • v.21 no.1
    • /
    • pp.7-26
    • /
    • 2012
  • Nakseonjae in Changdeokgung Palace was established at The King Hunjong's 13rd year (1847), the mid-19th century. It was constructed for own rests of King Hunjong and the residence of Kyungbin (king's concubines), and is showing features of upper-class houses from several points such as rustic architectural types by getting out of authoritative aspects as king's shelter space within the palace, block and floor distribution that separated spaces for men and women, simplicity in structures and styles, and non-colorful painting etc. This study aims at tracing on which architectural types did the upper-class houses within Hanyang (modern Seoul) at late Joseon Dynasty have and what was characteristics of Nakseonjae. The resemblance between Nakseonjae and the upper-class houses was very little differences from scale aspects, and floor plan shapes of Anchae (women's quarters) and Sarangchae (men's quarters) were followed basic common styles. Also, resemblance could be confirmed in the structural styles too. Characteristics of Nakseonjae are showing apparent differences from clearance compositions such as hall configuration etc. Nakseonjae was king's dwelling place, and spaces for house's collateral functions such as kitchen, stable, and warehouse etc together with shrine were unnecessary, and such places were substituted into servants' quarters for assisting the Royal family. In detailed structural styles, column's size was larger 3cm or more than the upper-class houses, and its height was higher to the degree of 30~60cm. Besides, formality as king's shelter space was raised more in decorating aspects, and Nakseonjae was implemented by getting architectural influences from Qing Dynasty of China. This study induced features of Hanyang's upper-class houses at the 19th century by supplementing distribution and space configurations at existing cases of Seoul and Gyeonggi area together with house diagrams having been collected by Gaokdohyung (site and floor plan) of Jangseogak Library, and confirmed resemblances and differences with Nakseonjae, that is, features of Nakseonjae. Through the result, this study judges a fact that architecture of Nakseonjae seemed to be affected from conveniences of upper-class houses within Hanseong, and also architectural styles and distribution types of Nakseonje would give influences to the upper-class houses.

Optimized Hardware Design of Deblocking Filter for H.264/AVC (H.264/AVC를 위한 디블록킹 필터의 최적화된 하드웨어 설계)

  • Jung, Youn-Jin;Ryoo, Kwang-Ki
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.1
    • /
    • pp.20-27
    • /
    • 2010
  • This paper describes a design of 5-stage pipelined de-blocking filter with power reduction scheme and proposes a efficient memory architecture and filter order for high performance H.264/AVC Decoder. Generally the de-blocking filter removes block boundary artifacts and enhances image quality. Nevertheless filter has a few disadvantage that it requires a number of memory access and iterated operations because of filter operation for 4 time to one edge. So this paper proposes a optimized filter ordering and efficient hardware architecture for the reduction of memory access and total filter cycles. In proposed filter parallel processing is available because of structured 5-stage pipeline consisted of memory read, threshold decider, pre-calculation, filter operation and write back. Also it can reduce power consumption because it uses a clock gating scheme which disable unnecessary clock switching. Besides total number of filtering cycle is decreased by new filter order. The proposed filter is designed with Verilog-HDL and functionally verified with the whole H.264/AVC decoder using the Modelsim 6.2g simulator. Input vectors are QCIF images generated by JM9.4 standard encoder software. As a result of experiment, it shows that the filter can make about 20% total filter cycles reduction and it requires small transposition buffer size.

P Wave Detection Algorithm through Adaptive Threshold and QRS Peak Variability (적응형 문턱치와 QRS피크 변화에 따른 P파 검출 알고리즘)

  • Cho, Ik-sung;Kim, Joo-Man;Lee, Wan-Jik;Kwon, Hyeog-soong
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.8
    • /
    • pp.1587-1595
    • /
    • 2016
  • P wave is cardiac parameters that represent the electrical and physiological characteristics, it is very important to diagnose atrial arrhythmia. However, It is very difficult to detect because of the small size compared to R wave and the various morphology. Several methods for detecting P wave has been proposed, such as frequency analysis and non-linear approach. However, in the case of conduction abnormality such as AV block or atrial arrhythmia, detection accuracy is at the lower level. We propose P wave detection algorithm through adaptive threshold and QRS peak variability. For this purpose, we detected Q, R, S wave from noise-free ECG signal through the preprocessing method. And then we classified three pattern of P wave by peak variability and detected adaptive window and threshold. The performance of P wave detection is evaluated by using 48 record of MIT-BIH arrhythmia database. The achieved scores indicate the average detection rate of 92.60%.

2D-to-3D Stereoscopic conversion: Depth estimation in monoscopic soccer videos (단일 시점 축구 비디오의 3차원 영상 변환을 위한 깊이지도 생성 방법)

  • Ko, Jae-Seung;Kim, Young-Woo;Jung, Young-Ju;Kim, Chang-Ick
    • Journal of Broadcast Engineering
    • /
    • v.13 no.4
    • /
    • pp.427-439
    • /
    • 2008
  • This paper proposes a novel method to convert monoscopic soccer videos to stereoscopic videos. Through the soccer video analysis process, we detect shot boundaries and classify soccer frames into long shot or non-long shot. In the long shot case, the depth mapis generated relying on the size of the extracted ground region. For the non-long shot case, the shot is further partitioned into three types by considering the number of ground blocks and skin blocks which is obtained by a simple skin-color detection method. Then three different depth assignment methods are applied to each non-long shot types: 1) Depth estimation by object region extraction, 2) Foreground estimation by using the skin block and depth value computation by Gaussian function, and 3)the depth map generation for shots not containing the skin blocks. This depth assignment is followed by stereoscopic image generation. Subjective evaluation comparing generated depth maps and corresponding stereoscopic images indicate that the proposed algorithm can yield the sense of depth from a single view images.

Peripheral Dose Distributions of Clinical Photon Beams (광자선에 의한 민조사면 경계영역의 선량분포)

  • 김진기;김정수;권형철
    • Progress in Medical Physics
    • /
    • v.12 no.1
    • /
    • pp.71-77
    • /
    • 2001
  • The region, near the edge of a radiation beam, where the dose changes rapidly according to the distance from the beam axis is known as the penumbra. There is a sharp dose gradient zone even in megavoltage photon beams due to source size, collimator, lead alloy block, other accessories, and internal scatter ray. We investigate dosimetric characteristics on penumbra regions of a standard collimator and compare to those of theoritical model for the optimal use of the system in radiotherapy. Peripheral dose distribution of 6 W Photon beams represents penumbral forming function as the depth. Also we have discussed that the peripheral dose distribution of clinical photon beams, differences between calculation dose use of emperical penumbral forming function and measurements in penumbral region. Predictions by emperical penumbral forming functions are compared with measurements in 3-dimensional water phantom and it is shown that the method is capable of reproduceing the measured peripheral dose values usually to within the statistical uncertainties of the data. The semiconductor detector and ion chamber were positioned at a dmax depth, 5cm depth, 10cm depth, and its specific ratio was determined using a scanning data. The effective penumbra, the distance from 80% to 20% isodose lines were analyzed as a function of the distance. The extent of penumbra will also expand with depth increase. Difference of measurement value and model functions value according to character of the detector show small error in dose distribution of the peripheral dose.

  • PDF