• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.157-163
• /
• 2009

With the wide usage of internet in many fields, networks are being exposed to many security threats, such as DDoS attack and worm/virus. For enterprise network, prevention failure of network security causes the revealing of commercial information or interruption of network services. In this paper, we propose a method of prevention of DDoS attacks for enterprise network based on traceback and network traffic analysis. The model of traceback implements the detection of IP spoofing attacks by the cooperation of trusted adjacent host, and the method of network traffic analysis implements the detection of DDoS attacks by analyzing the traffic characteristic. Moreover, we present the result of the experiments, and compare the method with other methods. The result demonstrates that the method can effectively detect and block DDoS attacks and IP spoofing attacks.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.341-344
• /
• 2002

The importance of protection for information is increasing by the rapid development of information communication and network. Asymmetric crypto-system is the mainstream in encryption system rather than symmetric cryptosystem by above reasons. But asymmetric cryptosystem is restricted in applying to application fields by the reason it takes more times to process than symmetric cryptosystem. In this paper, the proposed cryptosystem uses an algorithm that combines block cipherment with stream ciphcrment. Proposed cryptosystem has a high stability in aspect of secret rate by means of transition of key sequence according to the information of plaintext while asymmetric /symmetric cryptosystern conducts encipherment/decipherment using a fixed key Consequently, it is very difficult to crack although unauthenticator acquires the key information. So, the proposed encryption system which has a certification function of asymmetric cryptosystcm and a processing time equivalent to symmetric cryptosystcm will be highly useful to authorize data or exchange important information.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.71-78
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.2
• /
• pp.229-237
• /
• 2003

The flow and heat transfer characteristics at the surface of two-dimensional protruding heated blocks using confined impingement multiple slot jets were computationally investigated Numerical predictions were made for round-edged nozzles at several nozzle-to-target plate spacings and jet-to-jet distances, with turbulent jet Reynolds numbers ranging from 2000 to 7800. The commercial finite-volume code FLUENT was used to solve the heat transfer characteristics and flow fields using a RNG $\textsc{k}-\varepsilon$ model. The computed heat transfer characteristics at the surface of heated blocks were in good qualitative agreement with previous experimental data The results of heat transfer characteristics on the surface of protruding heated blocks are important considerations in electronics Packaging design.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.71-78
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.113-116
• /
• 2001

Reed-Solomon(RS) code is the most powerful burst error correcting code. In Ois paper, the architecture for the adaptive RS encoder adaptable for multi QoS requirements or time-varying channel environments has been designed. In the adaptive RS code, the message length k and the error correction capability t are allowed to be variable so that the block length n is also variable. We proposed the architecture of the adaptive RS encoder by designing the optimal structure of Galois fields multiplier with comparison of fixed multiplier and variable multiplier. The proposed architecture is implemented in VHDL and verified with the simulation tool

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.21-24
• /
• 2005

Numerical analysis were made for the unsteady flow fields of the rotor system of a Tilt-Rotor aircraft in cruise mode. The Reynolds-averaged thin-layer Wavier-Stokes equations were discretized by Roe's upwind differencing scheme and integrated in time by the LU-SGS algorithm. The computational domain of the rotor system was constructed by seven multi-block Chimera grids. Comparison of pressure coefficient on the surface of the main wing and blades were made for 3cases of advance ratio(0.325, 0.350, 0.375) and thrust and power coefficients for the rotor were compared with experimental data.

• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.41-47
• /
• 2015

Hydraulic manipulators have been widely used in many different fields due to their high force/torque to inertia ratio. The increased speed of hydraulic manipulators requires solutions to problems ranging from mechanical design to the need to determine a robot model suitable for model-based control. As a solution, this paper presents the integration of SolidWorks with Simscape for designing and controlling hydraulic manipulators. The integration provides a platform for the rapid control prototyping of a hydraulic robot without the need to build actual prototypes. The mechanical drawings of a manipulator are first created using Solidworks and are then imported into Simscape, where the manipulator is represented by connected block diagrams based on the principle of physical modeling. Simulation examples for a 3D manipulator made by KNR SYSTEM INC are verified to show the effectiveness of the presented platform.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.408-412
• /
• 2009

In this paper, a new efficient algorithm for global motion estimation is proposed. This algorithm uses a previous 4-parameter model based global motion estimation algorithm and M-estimator for improving the accuracy and robustness of the estimate. The first algorithm uses the block based motion vector fields and which generates a coarse global motion parameters. And second algorithm is M-estimator technique for getting precise global motion parameters. This technique does not increase the computational complexity significantly, while providing good results in terms of estimation accuracy. In this work, an initial estimation for the global motion parameters is obtained using simple 4-parameter global motion estimation approach. The parameters are then refined using M-estimator technique. This combined algorithm shows significant reduction in mean compensation error and shows performance improvement over simple 4-parameter global motion estimation approach.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.546-553
• /
• 2001

A Parametric study is numerically carried out for flow fields in a two-dimensional plane channel with thin obstacles(“baffles and blocks”) mounted symmetrically in the vertical direction and periodically in the streamwise direction. The aim of this investigation is to understand how various geometric conditions influence the critical characteristics and pressure drop. A range of BR(the ratio of baffle interval to channel height) between 1 and 5 is considered. Especially when BR is equal to 3, for which the critical Reynolds number turned out to be minimal, we add blocks in the center region in order to study their destabilizing effects on the flows. It is revealed that the critical Reynolds number is further decreased by the presence of the block.