• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• ETRI Journal
• /
• v.39 no.5
• /
• pp.672-682
• /
• 2017

Video compression exploits statistical, spatial, and temporal redundancy, as well as transform and quantization. In particular, the transform in a frequency domain plays a major role in energy compaction of spatial domain data into frequency domain data. The high efficient video coding standard uses the type-II discrete cosine transform (DCT-II) and type-VII discrete sine transform (DST-VII) to improve the coding efficiency of residual data. However, the DST-VII is applied only to the Intra $4{\times}4$ residual block because it yields relatively small gains in the larger block than in the $4{\times}4$ block. In this study, after rearranging the data of the residual block, we apply the DST-VII to the inter-residual block to achieve coding gain. The rearrangement of the residual block data is similar to the arrangement of the basis vector with a the lowest frequency component of the DST-VII. Experimental results show that the proposed method reduces the luma-chroma (Cb+Cr) BD rates by approximately 0.23% to 0.22%, 0.44% to 0.58%, and 0.46% to 0.65% for the random access, low delay B, and low delay P configurations, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.1
• /
• pp.13-19
• /
• 2019

The accuracy of machine learning is greatly affected by amount of learning data and quality of data. Collecting existing Web-based learning data has danger that data unrelated to actual learning can be collected, and it is impossible to secure data transparency. In this paper, we propose a method for collecting data directly in parallel by blocks in a block - chain structure, and comparing the data collected by each block with data in other blocks to select only good data. In the proposed system, each block shares data with each other through a chain of blocks, utilizes the All-reduce structure of Parallel-SGD to select only good quality data through comparison with other block data to construct a learning data set. Also, in order to verify the performance of the proposed architecture, we verify that the original image is only good data among the modulated images using the existing benchmark data set.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.3
• /
• pp.30-36
• /
• 2012

block truncation coding(BTC) image compression is known as a simple and efficient technology for image compression algorithm. In this paper, we propose RMC-BTC algorithm(RMC : reduction method chrominace data) for color image compression. To compress chrominace data, in every BTC block, the RMC-BTC coding employs chrominace data expressed with average of chrominace data and using method of luminance data bit-map to represented chrominance data bit-map. Experimental results shows efficiency of proposed algorithm, as compared with PSNR and compression ratio of the conventional BTC method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.3970-3990
• /
• 2021

In view of the problems of insufficient data collection and processing capability of multi-source heterogeneous equipment, and low visibility of equipment status at the ship block construction site. A data collection method for ship block construction equipment based on wireless sensor network (WSN) technology and a data processing method based on edge computing were proposed. Based on the Browser/Server (B/S) architecture and the OneNET platform, an online monitoring system for ship block construction equipment was designed and developed, which realized the visual online monitoring and management of the ship block construction equipment status. Not only that, the feasibility and reliability of the monitoring system were verified by using the intelligent tire frame system as the application object. The research of this project can lay the foundation for the ship block construction equipment management and the ship block intelligent construction, and ultimately improve the quality and efficiency of ship block construction.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.175-184
• /
• 2002

In this paper, diallel crosses block designs for control versus test comparisons among the lines are proposed. These block designs are constructed by using partially balanced incomplete block designs with C-properties. Also, the efficiencies of the diallel crosses block designs obtained through this method are tabulated for number of lines 22 or less.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.78-81
• /
• 1991

Digital radio data is composed of groups which are divided into 4 blocks of 26 bits. And each block is made up of information word and check word. Check word of digital radio data that is composed ofcode word and offset word is used for group/block synchronization and error correction. In this paper, we have investigated the group/block synchronizer using offext word and shortened cyclic decoder for correcting error produced during the radio data transimission. Also, we have simulated the decoding process of the proposed decoder. From the simulation results, we have confirmed that the proposed decoder most with the required coding capcbility.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.3
• /
• pp.23-30
• /
• 2008

A data hiding method based on least significant bit (LSB) substitution and multi-pixel differencing (MPD) is presented on the proposed method to improve the capacity of the hidden secret data and to provide an imperceptible visual quality. First, a sum of different values for four-pixel sub-block is calculated. The low value of the sum can be located on a smooth block and the high value is located on an edged block. The secret data are hidden into the cover image by LSB method in the smooth block, while MPD method in the edged block. The experimental results show that the proposed method has a higher capacity and maintains a good visual quality.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.187-196
• /
• 2017

The size of raw data has dramatically increased due to the recent trend of Synthetic Aperture Radar(SAR) development plans for high resolution and high definition image acquisition. The large raw data has an impact on satellite operability due to the limitations of storage and transmission capacity. To improve the SAR operability, the SAR raw data shall be compressed before transmission to the ground station. The Block Adaptive Quantization (BAQ) algorithm is one of the data compression algorithm and has been used for a long time in the spaceborne SAR system. In this paper, an optimization method of BAQ threshold table is introduced using real SAR raw data to prevent the degradation of signal quality caused by data compression. In this manner, a new variation estimation strategy and a new threshold method for block type decision are introduced.

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.397-408
• /
• 2003

Existing indexing mechanisms of XML data using numbering scheme have a drawback of rebuilding the entire index structure when insertion, deletion, and update occurs on the data. We propose a new indexing mechanism based on split blocks to cope with this problem. The XML data are split into blocks, where there exists at most a relationship between two blocks, and numbering scheme is applied to each block. This mechanism reduces the overhead of rebuilding index structures when insertion, deletion, and update occurs on the data. We also propose two algorithms, Parent-Child Block Merge Algorithm and Ancestor-Descendent Algorithm which retrieve the relationship between two entities in the XML hierarchy using this indexing mechanism. We also propose a mechanism in which the identifier of a block has the information of its Parents' block to expedite retrieval process of the ancestor-descendent relationship and also propose two algorithms. Parent-Child Block Merge Algorithm and Ancestor-Descendent Algorithm using this indexing mechanism.