• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1161-1168
• /
• 2009

This research was conducted on characteristic of offensive odors in Shihwa industrial complex. Result of blocks distribution of TVOC indicates that mechanic block, site D, was the highest concentration (74 ppb). Chemistry block, site A, was the second highest concentration (50 ppb). Also, mixed blocks, metal blocks and park etc. were measured almost similar concentration about 30 ppb, but mixed block, site F, was the place where concentrations were the smallest. Average of TVOC was shown about 35 ppb concentration. Aldehydes including acetaldehyde, butyraldehyde and hydrogen sulfide concentrations were prevalent among offensive odors in Shihwa industrial complex. Comparing the offensive odor intensity mostly about acetaldehyde, butyraldehyde and hydrogen sulfide which contain high offensive odor intensity showed results that sites A, B (chemistry block) and site D, I (mechanic block) site H (metal block) have showed the intensity over 1. In the case of acetaldehyde, relatively the high odor intensities over '2' were able to obtain in many cases. The correlation coefficient (r) for hydrogen sulfide was 0.91, so that high positive correlation exists between offensive odor intensity and the hydrogen sulfide element. Butyraldehyde also showed high positive correlation coefficient, as 0.82. Correlation coefficient of acetaldehyde that had the highest value as offensive odor substance was 0.62, had somewhat correlation with offensive odor intensity.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.1013-1020
• /
• 2000

In this paper, we propose an algorithm which segments hierarchically blocks of image using discrete cosine transform(DCT) and execute finite-state vector quantization (FSVQ) for each block. Using DCT coefficient feature, image is segmented hierarchically to large smooth block and small edge block, then the block hierarchy informations are transmitted. The codebooks are respectively constructed for each hierarchical blocks, the encoder transmits codeword index using FSVQ for reducing encoded bit with hierarchical segmentation. Compared with side match VQ(SMVQ) and hierarchical FSVQ(HFSVQ) algorithm, about Zelda and Boat image, the new algorithm shows better picture quality with 1.97dB and 2.85 dB difference as to SMVQ, 1.78dB and 1.85dB diffences as to HFSVQ respectively.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.193-198
• /
• 2009

The H.264/ AVC video coding standard supports the intra prediction with various block sizes for luma component and a 8x8 block size for chroma components. This new feature of H.264/AVC offers a considerably higher improvement in coding efficiency compared to previous compression standards. In order to achieve this, H.264/AVC uses the Rate-distortion optimization (RDO) technique to select the best intra prediction mode for each block size, and it brings about the drastic increase of the computation complexity of H.264 encoder. In this paper, a fast block size decision algorithm is proposed to reduce the computation complexity of the intra prediction in H.264/AVC. The proposed algorithm computes the smoothness based on AC and DC coefficient energy for macroblocks and compares with the nonparametric criteria which is determined by considering information on neighbor blocks already reconstructed, so that deciding the best probable block size for the intra prediction. Also, the use of non-parametric criteria makes the performance of intra-coding not be dependent on types of video sequences. The experimental results show that the proposed algorithm is able to reduce up to 30% of the whole encoding time with a negligible loss in PSNR and bitrates and provides the stable performance regardless types of video sequences.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.2
• /
• pp.28-38
• /
• 2000

This paper proposes a fractal compression method using the domain classification and local searching, which utilize DCT coefficient characteristic Generally, the fractal Image encoding method has a time consuming process to search a domain to be matched with range block In order to reduce computation complexity, the domain and range regions are respectively classified into 4 category by using the characteristics of DCT coefficients and each range region is encoded by a method suitable for the property of its category Since the bit amount of the compressed image depends on the number of range blocks, the matching of domain block and range block is induced on the large range block by using local search, so that compression ratio is increased by reducing the number of range block In the local search, the searching complexity is reduced by determining the direction and distance of searching using the characteristics of DCT coefficients The experimental results shows that the proposed algorithm have 1 dB higher PSNR and 0 806 higher compression ratio than previous algorithm.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.160-167
• /
• 2017

The purpose of this study is to identify the possibility of developing the 100% Recycled-resources Absorbent-Pervious Alkali-activated Blocks using both the alkalli-binder and the recycled aggregate. In addition, It established a test method such as Void ratio, compressive strength, coefficient permeability, absorption, and evaporation. As a result, an alkali-activated using recycled aggregate block was able to manufacture an 24 MPa class absorbent-pervious blocks with a liquid type sodium silicate and early high temperature curing. In this case, water-holding capacity, absorption and relative absorption were more effective than the natural aggregates. In conclusion, Absorbent-pervious alkali-activated Block Using recycled aggregate has a surface temperature reducing effect of approximately 10 % compared to ordinary concrete block.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.599-604
• /
• 2011

The PET-PEN copolymers have been synthesized and the effect of their morphology on the physical properties of polyester flexible substrate was investigated. It was found that the block sequence of synthesized copolymer was varied depending upon DMT/NDC ratio in polymerization. Higher PET-PEN and PEN block sequence in polyester copolymer resulted in the increase of glass transition temperature and it caused the enhancement of dimensional stability as a polyester flexible substrate. The highest coefficient of thermal expansion(CTE) was obtained when DMT/NDC ratio is 50/50. Synthesized PET-PEN copolymer seems to be acceptable as a flexible substrate since it shows that their optical transmittance at 550 nm is over 80% and thermal weight loss at $280^{\circ}C$ for 1 hr is less than 0.4 wt%.

• Geomechanics and Engineering
• /
• v.14 no.6
• /
• pp.571-580
• /
• 2018

The failure mechanism of tunnel roof is investigated with upper bound theorem of limit analysis. The stochastic settlement and nonlinear failure criterion are considered in the present analysis. For the collapse of tunnel roof, the surface settlement is estimated by the simplified stochastic medium theory. The failure curve expressions of collapse blocks in homogeneous and in layered soils are derived, and the effects of material parameters on the potential range of failure mechanisms are discussed. The results show that the material parameters of initial cohesion, nonlinear coefficient and unit weight have significant influences on the potential range of collapse block in homogeneous media. The proportion of collapse block increases as the initial cohesion increases, while decreases as the nonlinear coefficient and the unit weight increase. The ground surface settlement increases with the tunnel radius increasing, while the possible collapse proportion decreases with increase of the tunnel radius. In layered stratum, the study is investigated to analyze the effects of material parameters of different layered media on the proportion of possible collapse block.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.39-44
• /
• 1992

Twelve male crossbred calves of 18 months of age were divided into two groups of six each. Animals in both the groups were fed wheat straw ad lib. However, animals in group II had free access to urea molasses mineral block (UMMB) lick. Straw DM intake (kg/100 kg B. Wt. and $g/w^{0.75}\;kg$) was significantly (p < 0.01) higher in group II ($1.95{\pm}0.06$; $75.55{\pm}1.79$) as compared to group I ($1.27{\pm}0.08$; $48.77{\pm}2.43$). Straw DM digestibility coefficient was not significantly different in groups I and II. However, DOMI (kg/100 kg B. Wt.) was significantly (p < 0.01) higher in group II ($0.986{\pm}0.05$) as compared to group I ($0.615{\pm}0.03$). Digestibility coefficient of DM, OM and CP were significantly higher in group II as compared to group I. However, digestibility coefficients of EE, CF and NFE were non-significantly different between the two groups. Animals in group II exhibited significantly (p < 0.01) higher and positive N, Ca and P balances as compared to group I which exhibited negative balances. Total-N, ammonia-N and urea-N in the blood plasma of animals in group II were significantly (p < 0.01) higher as compared to group I.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.132-142
• /
• 1999

In this paper, a new formula for primary and secondary thrust of metal belt CVT is proposed considering variation of band tension, block compression and active arc for each of the primary and secondary pulleys. For the secondary thrust, effective friction coefficient is introduced considering the effect of flange deflection. Nondimensional primary and secondary thrust of the metal belt CVT by the new formula agree well with the experimental results except for low torque range, $0\;<\;{\lambda}\;<\;0.2$ at speed ration i = 1.0. The new formula can be used in design of the primary and secondary thrusts control system for the metal belt CVT.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.81-82
• /
• 2017

This study analyzed the compressive and flexural strength characteristics and the permeability coefficient of the trial product of amorphous metallic fiber reinforced porous block using high volume blast furnace slag powder.