• 제목/요약/키워드: blind

검색결과 2,651건 처리시간 0.027초

A Defective Detector Suppression in the Short Wave Infrared Band of SPOT/VEGETATION-1

  • Han, Kyung-Soo;Kim, Young-Seup
    • 대한원격탐사학회지
    • /
    • 제19권5호
    • /
    • pp.403-409
    • /
    • 2003
  • Since SPOT4 satellite contained VEGETATION 1 sensor launched, the noise in VEGETATION data was occasionally arisen a difficulty for the data traitement. Blind line noise types were studied in VEGETATION-l short wave infrared channel(SWIR). In order to provide a precis product, the procedure for removing this noise is strongly recommended. In the case that the blind values are clearly distinguished from contamination-free values a simple threshold method was applied, while a changeable threshold method was used for the blind value mixed with contamination-free values. New algorithm presented in this study is consists of two method for each type of SWIR blind. After removing blind line, there were again some residual pixels of blind, because the threshold is not determinated sufficiently low. Lower threshold could remove the blind line as well as the contamination-free pixels. Nevertheless, the results showed a good qualitative improvement as compared with other algorithm.

針의 巨刺法에 對한 實證的 硏究 -眼球의 Blind spot 變化에 對하여- (The practical study of contralateral therapeutic theory in acupuncture approach -about the change in the blind spot mapping pre and post acupuncture-)

  • 우영민;남영
    • 한방안이비인후피부과학회지
    • /
    • 제13권2호
    • /
    • pp.200-210
    • /
    • 2000
  • objective to ascertain whether the concept of the therapeutic side is associated with changes in the blind sport mapping that represents the brain function. design Physiological blind spot maps were used as an integer of brain activity before and after acupuncture needling on the meridian point Hapkok(合谷) and Techung(太衝) in the unilateral side decided by double-blind controlled study(20 subjects). setting outpatient clinic participants: adult volunteers intervention twenty subjects were divided into two comparative groups and underwent specific acupuncture therapy on the unilateral side. Blinded examiners obtained reproducible pre and post-acupuncture cortical maps, which were subjected to statistical analysis. main outcome measures Brain activity was demonstrated by reproducible circumferential measurements of cortical hemispheric blind spot maps before and after acupuncture on the unilateral side. in case of acupuncture needling on the ipsilateral side of an enlarged side of bilnd spot, there were reduction of blind spot in 7 cases of 10 subjects, and enlargement in 3 cases. in case of acupuncture needling on the contralateral side of the enlarged side of blind spot, there were enlargement of blind spot in 6 cases of 10 subjects, and reduction in 4 cases. results the significant changes in the blind spots before and after acupuncture were observed Acupuncture needlings on the ipsilateral or contralateral side of an enlarged cortical map were associated with the concept of the therapeutic side traditionally accepted in the oriental medical society. Acupuncture needling on the ipsilateral side of an enlarged blind spot map is associated with the reduction of map, and increaed contralateral cortical activity. Acupuncture needling on the side opposite an enlarged blind spot map is associated with the enlargement of map, and decreased cortical activity. conclusion Reproducible maps of cortical responses can be used to measure the neurological consequences of acupuncture needling. Acupuncture can affect the somatic sensory informations that reach to the contralateral thalamus, and so affect thalamic integration. we found that acupuncture therapy may be associated with an increase or a decrease in brain function depending on the side of acupuncture needling. thus, the traditional concept of the contralateral therapeutic theory in acupuncture approach has the clinical significance in the view of brain function.

  • PDF

대리 은닉서명 에이전트의 설계를 위한 최적화 알고리즘 (An Optimal Algorithm for the Design of a Proxy Blind Signature Agent)

  • 이현숙
    • 한국컴퓨터정보학회논문지
    • /
    • 제18권7호
    • /
    • pp.85-92
    • /
    • 2013
  • 본 논문에서는G. Wang의 대리서명 방식과 Schnorr 은닉서명 방식을 이용하여 안전한 대리은닉서명방식을 제안한다. 대리은닉 서명은 대리서명과 은닉서명을 결합한 전자서명 방식이다. G. Wang은 두-참가자 Schnorr 서명방식에 기반한 안전성 증명 가능한 대리서명 방식을 제안하였다. 이 논문에서는, G. Wang의 대리서명 방식과 또한, 제안하는 대리 은닉 서명 방식을 이용하여 전자 투표를 위한 대리 에이전트를 고안한다. 그리고, 제안하는 서명 방식이 대리 서명과 은닉 서명의 안전성 요구사항을 모두 만족시키며 최적화된 효율적인 대리 은닉 서명 방식임을 보인다.

DS-CDMA 시스템을 위한 혼합 LMSF 블라인드 다중 사용자 검출 (Mixed LMSF Blind Multiuser Detector for DS-CDMA Systems)

  • 박성욱;박종욱
    • 전자공학회논문지 IE
    • /
    • 제43권2호
    • /
    • pp.75-79
    • /
    • 2006
  • 블라인드 기법은 훈련열 없이 검출하고자 하는 사용자의 최소한의 정보만을 가지고 정보 검출이 가능한 방법이다. 본 논문에서는 직접 대역 확산 코드 분할 다중 접속 시스템에서 다중사용자 간섭을 제거하기 위해서, 혼합된 비용함수를 사용하는 블라인드 다중사용자 검출기를 제안하였다. 제안된 블라인드 다중사용자 검출기의 비용함수는 LMS와 LMF를 혼합한 형태로 이루어져있으며, 제안된 다중사용자 검출기의 성능을 평가하기 위해서 가우시안 채널 하에서 BER을 비교 하였다. 모의실험 결과, 사용자가 20 명 존재하는 경우, 제안된 블라인드 검출기가 블라인드 MOE 다중사용자 검출기에 비해 약 3dB정도 더 나은 성능을 지님을 확인 할 수 있었다.

내측 블라인드의 하절기 일사열 차폐 성능 비교 (Comparing Solar Heat Shading Performances of Internal Blinds in the Summer)

  • 박은미;최동호;박민용;이경희
    • 한국태양에너지학회 논문집
    • /
    • 제34권6호
    • /
    • pp.75-83
    • /
    • 2014
  • Heat loss through windows and doors occupies 20 to 45% of the total heat loss in building. It accounts for a large proportion of the total heat loss in building. In order to suppress the amount of heat flow through the windows and doors were considered actions such as reinforcement of insulation performance of window, adoption of low-e glass, and installation of solar heat shading device. The Purpose of this study is to compare solar heat shading performances of 3 types of internal blinds in the summer. In order to verify the solar heat shading performances of the blinds, a roll blind, blind A(Venetian blind) and blind B(Daylight guiding venetian blind)were installed in the four rooms with the same environmental conditions. As a result of the experiment, the blind B, blind A, roll blind showed an excellent performance in that order. Its because the blind B is made of aluminum materials coated with special paints on surface. It doesn't converted to long wave by short wave light. and it is reflected to short wave to outside.

베네치안 블라인드의 슬래트 각도변화가 건물의 냉난방 부하에 미치는 영향 (The Effect on the Heating and Cooling Load of Building by Slat Angle Variation of Venetian Blind)

  • 조성환;신기식
    • 설비공학논문집
    • /
    • 제7권2호
    • /
    • pp.171-183
    • /
    • 1995
  • Generally, among many kinds of shading devices such as venetian blind, sunscreen, louver and curtain, venetian blind is using widely because the mechanism is so simple and easy to use solar insolation by controlling the slat angle. Analysis of time dependent heat transfer through the window with venetian blind is very important in order to use it effectivly. Therefore, in this study, theoretical thermal analysis method was developed to analyze time dependent heat transfer through a double pane window with and without venetian blind, and was made one module of TRNSYS(A Transient Simulation Program)program. By this way, it was analyzed that how much the variation of slat angle, slat colour and slat absorptivity of venetian blind would be affected on the heating and cooling load of building, and also which colour and angle of slat was optimal for the heating and cooling load of building.

  • PDF

햅틱피드백 장치를 이용한 시각장애인 이동보조시스템 (A Walking Aid System for Blind People by Exploiting a Haptic Feedback Equipment)

  • 민성희;정윤재;오유수
    • 대한임베디드공학회논문지
    • /
    • 제10권3호
    • /
    • pp.157-164
    • /
    • 2015
  • In this paper we propose a walking aid system for blind people by exploiting a haptic feedback equipment. The proposed system is a form of haptic feedback cane which is composed of MCU, communication module, sensing module and actuator. The proposed system recognizes obstacles around the blind by using ultrasonic sensors in the sensing module. Moreover, the system generates feedback information about the detected obstacle and then notifies the information to the blind through the actuator. The blind can notice the direction of the detected obstacle with the haptic feedback equipment and vibration motor. Futhermore, the proposed system controls a nearby IoT(Internet of Things) system by utilizing push buttons through the ZigBee communication. Finally, the blind can easily decide the direction of the obstacle without interference of terrain feature by using the proposed system.

RADIANCE프로그램을 이용한 블라인드 모델링 (The Blind Modeling of Horizontal Blind Using the RADIANCE Program)

  • 정근영;최안섭
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2002년도 학술대회논문집
    • /
    • pp.91-95
    • /
    • 2002
  • This study is using the RADIANCE lighting simulation tool to determine the transmittance where the horizontal blind is installed. The transmittance is applied to DayDim program which is a lighting calculation and analysis tool. Parameters such as clear sky type, seasonal changes(the summer solstice), altitude, azimuth and horizontal blind angle at a 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$ were considered. The simulation results present that measured directional transmittances have different values according to each directional property of the horizontal blind.

  • PDF

타원곡선의 이산로그문제에 기반을 둔 Blind signature (Blind Signatures Based on the Elliptic Curve Discrete Logarithm Problem)

  • 윤중철;임종인;서광석;서창호
    • 한국정보보호학회:학술대회논문집
    • /
    • 한국정보보호학회 1997년도 종합학술발표회논문집
    • /
    • pp.111-119
    • /
    • 1997
  • 본 논문에서는 Chaum이 처음으로 제안한 개념인 Blind signature를 타원곡선위에서 이산로그문제를 이용해 구현해보고 ECDSA와 Nyberg, Rueppel의 scheme을 Blind signature로 변형시킨 새로운 signature를 제시한다.

  • PDF

이중외피 중공층의 열성능을 고려한 블라인드 위치 계획 (Planning the Blind Position Considering Thermal Performance in the Intermediate Space of Double-Skin Facade)

  • 최동희;조재훈;석호태;여명석;김광우
    • 설비공학논문집
    • /
    • 제17권7호
    • /
    • pp.620-628
    • /
    • 2005
  • The blinds in the intermediate space are installed to block the direct solar radiation. As the blind divide the airflow of intermediate space into two, thermal performance of Double-Skin Facade (DSF) are affected by the blind position. Therefore blind position should be planed with careful consideration in order to maximize the thermal performance of DSF. In this study, CFD was peformed to analyze the effect of blind position in multistory-type DSF in variation of other DSF elements. The simulation results showed that the case with narrow depth of intermediate space and outlet on upper side of outer-facade, it is profitable to place blind as close as possible to the outer-facade. In the other cases, the blind should maintain 0.15 m distance from outer-facade.