• 펄프종이기술
• /
• 제36권1호
• /
• pp.30-36
• /
• 2004

Waste papers(MOW and ONP) were deinked with alkaline cellulolytic enzyme from Coprinus cinereus 2249. The effectiveness of alkaline enzyme on sticky contaminant removal and bleaching of recycling pulp was investigated. The conclusions obtained from the results are as follows. The brightness of deinked pulps MOW and ONP was most high in 0.4IU enzyme treatment. \circled2 The removal effect of sticky contaminant was enhanced with alkaline cellulolytic enzyme treatment. Bleaching with sodium hydrosulfite was most effective in one and two stage bleaching after enzyme treatment of mixed wastepaper of MOW and colored paper. \circled4 The brightness of alkaline enzyme deinked ONP was increased 20％ with $H_2O$$_2$ bleaching.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.109-114
• /
• 2015

In this study, the effects of chlorine dioxide (D) bleaching conditions on the delignification of hemp bast fiber were elucidated. Chlorine dioxide bleaching was carried out through three stages (DED) and five stages (DEDED), respectively. Applied amounts of chlorine dioxide at $D_1$ and $D_2$ stages were varied to find the optimum bleaching condition. It was found that the optical properties of its handsheet as well as the delignification of hemp bast fiber increased as the concentration of chlorine dioxide at $D_1$ stage increased. It was also notable that the bleachability of the DEDED bleaching stages was slightly more effective than that of the DED bleaching stages. The burst index of the handsheets made with bleached hemp bast fiber was higher than that of the unbleached samples, but the burst index of these samples decreased as their delignification increased. These results indicated that the higher concentration of chlorine dioxide at $D_1$ stage was major factor to improve the bleaching efficiency of hemp bast fiber.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1295-1305
• /
• 2005

The study was based on a three-stage, non-repetitive factorial experiment in which chemical-rotted kenaf fibers were treated separately with hydrogen peroxide concentrations of $0.5\%,\;1\%\;and\;2\%$, with pH solutions of 7, 9 and 11, and treatment times of 30, 60 and 90 minutes. Under optimal conditions, the study was conducted to determine the bleaching efficiency by the addition of chelators, penetrants and surfactants. The bleaching effects on the kenaf fibers were high in high hydrogen peroxide concentration, high in alkali solution pH, low in long treatment time. The optimal level of hydrogen peroxide on bleaching effects were at $2\%$ hydrogen peroxide concentration, with pH of 11 and treatment time of 60 minutes. Under the conditions of $2\%$ hydrogen peroxide concentration, pH 11 and treatment time of 60 minutes, the addition of chelator: Sodim Pyrophosphate(SP), Citric Acid(CA) made the bleaching effects of the kenaf fibers high.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.1-8
• /
• 2011

The presence of high silica in bamboo hinders the use of this material for production of rayon grade pulp. Research has been carried out to overcome this deficiency and improve quality of rayon grade pulp with the modification in pulping and bleaching process. Effect of acid boosted water prehydrolysis, sulphuric acid pre-treatment of unbleached pulp, chlorination stage at lower pH and treatment of bleached pulp with $SO_2$ water were evaluated. Acid boosted water prehydrolysis of chips reduces prehydrolysis time by 50 minutes as compared to water prehydrolysis. Treatment of unbleached pulp with sulphuric acid reduces ash, acid insoluble, silica, calcium and iron contents of the pulp by 56, 31, 82, 84 and 60% respectively. The addition of acid, increase in kappa factor in $C_D$ stage and combination of both were effective in removing silica in the pulp. Treatment of final bleached pulp with $SO_2$ water removes silica to a great extent and improves optical properties of the pulp as compared to $H_2SO_4$ or PAA. Pretreatment of the pulp with acid and modification in the bleaching process can reduce silica substantially and improve the quality of rayon grade bamboo pulp.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.100-109
• /
• 1997

The objectives of this study was to decrease pollutions of bleaching effluent and was to enhanced brightness of non-chlorine bleached pulps by xylanase treatments. Xylanase cloned Esherichacoli(E. coli) capable of each of endo, exo-xylanase and acetyl-esterase were obtained from Bacillus stearothermophillus. These xylanase was maintained high activity in alkali and high temperature. Especially endo-xylanase would be more active in $60^{\circ}C$ and pH 11. Xylanase pretreatment(X) of unbleached pulp increased brightness, and decreased the degree of delignification. The degree of increase in brightness of pulp due to xylanase pretreatment was similar to non-enzyme treated pulp, regardless of the amount of enzyme added. Therefore, the addition of xylanase of 2 unit was recommended when considering costs of enzyme. The pulp bleached XO sequence had higher brightness and lower Kappa no, than O bleached pulp, while pulp bleached XP sequence had similar brightness and Kappa no. with P bleached pulp. In XOC/D, XOZ and XOP bleaching sequences, brightness and degree of delignification were improved. The C/D and Z stage bleached pulp was good effect on rate of raise in brightness and Kappa no., but P stage bleached pulp had similar level in non-enzyme treated bleaching sequence.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.147-155
• /
• 2016

본 연구는 사탕수수 부산물 펄프를 Element Chlorine Free (ECF) 표백 처리할 때 마지막 과산화수소 표백단계를 추가하여 최종 표백 펄프의 잔류 이산화염소를 제거하고, 총 이산화염소 사용량을 제거하고자 하였다. 특히 과산화수소 표백단계를 효과적으로 사용하기 위한 킬레이트 처리 단계를 반응 조건이 비슷한 이산화염소 표백 단계와 동시 진행하였을 때, 개별적으로 킬레이트 처리를 진행한 표백 펄프의 표백 특성을 비교하였다. 총 이산화염소 사용량이 4.5%(w/w oven dried pulp)일 때 EDTA의 경우 킬레이트를 동시 처리할 때 백색도와 점도는 각각 87.0% ISO와 25.8 cPs로 개별 처리하는 경우 보다 더 높은 표백 특성(86.4% ISO, 25.2 cPs)을 나타냈다. 반면 DTPA를 킬레이트 화합물로 사용하는 경우 동시처리 시(83.9% ISO, 21.9 cPs) 개별처리(86.8% ISO, 25.6 cPs) 보다 표백 특성이 낮은 수준을 나타냈다. 특히 EDTA를 킬레이트 화합물로 사용시 잔류 전이금속(망간 이온, 철 이온) 농도가 개별처리 시 0.65 ppm, 66.74 ppm으로 나타난 반면 동시 처리시 0.52 ppm과 55.68 ppm으로 킬레이트 처리 효과가 향상됨을 확인할 수 있다. DTPA는 동시 처리시 0.71 ppm과 116.88 ppm의 망간 이온, 철 이온 농도가 나타난 반면 개별 처리시 0.56 ppm, 86.17 ppm의 농도로 동시 처리 시 킬레이트 처리 능력이 감소됨을 알 수 있다. 이를 통해 킬레이트 화합물 종류와 처리 방법에 따라 킬레이트 효과의 차이가 나타나며, 효율적인 공정을 위해서는 EDTA를 킬레이트 화합물로 이산화염소 표백단계와 동시 처리하는 것이 표백 효율과 공정효율을 위해 유리한 것으로 나타났다.

• 펄프종이기술
• /
• 제30권1호
• /
• pp.44-58
• /
• 1998

This study was carried out to bleach the Oakwood kraft pulp without the elemental chlorine using the xylanase or wastewater(We : wastewater enzymes) effluented from the submerged biofilter reactor containing the fungi, Phanerorhaete sordida YK-624. So in this research, the proper treatment conditions (pH, temperature, dosage and time) were investigated respectively. And after the various kinds of multistage bleaching of pulps, the properties of pulps were tested. From the experimental results, we can conclude as follows. In the treatments of Oakwood kraft pulps with xylanase, the proper pH, temperature, enzyme dosage and time were 8.0, $35^{\circ}C$ , 400 EXU/kg and 1 hr. respectively. And in the case of treatment with a wastewater(We) effluented from the submerged biofilter reactor, the proper pH, temperature and time were 5.5, $37^{\circ}C$ and 2 hr. respectively. On the other hand, Oakwood kraft pulps were bleached by the method of a multistage bleaching using xylanase or We instead of elemental chlorine Consequently the strengthes and brightnesses of pulps bleached by the method mentioned above were lower than those of pulp bleached by the conventional method using the elemental chlorine. But it is possible to improve the brightnesses through the increase of chlorine dioxide dosage or use of hydrogen peroxide in the final bleaching stage.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.84-96
• /
• 1998

This study was carried out to bleach the Pinewood kraft pulp without the elemental chlorine using the xylanase or wastewater(We:wastewater enzymes) effluented from the submerged biofilter reactor containing the fungi, Phanerochaete sordida YK-624. So in this research, the proper treatment conditions(pH, temperature, dosage and time) were investigated respectively. And after the various kinds of multistage bleaching of pulps, the properties of pulps were tested. From the experimental results, we can conclude as follows. In the treatments of Pinewood kraft pulps with xylanase, the proper pH, temperature, enzyme dosage and time were 8.0, $35^{\circ}C, 400EXU/kg and 3 hr. respectively. And in the case of treatment with a wastewater(We) effluented from the submerged biofilter reactor, the proper pH, temperature and time were 5.0, $37^{\circ}C and 3 hr. respectively. On the other hand, Pinewood kraft pulps were bleached by the method of a multistage bleaching using xylanase or We instead of elemental chlorine. Consequently, the strengthes and brightnesses of pulps bleached by the method mentioned above were lower than those of pulp bleached by the conventional method using the elemental chlorine. But it is possible to improve the brightnesses through the increase of chlorine dioxide dosage or use of hydrogen peroxide in the final bleaching stage.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.253-260
• /
• 1996

In this paper, a simple scheme of two-stage free-space photonic swiching system for nonblocking optical interconnections has been investigated using holgorams. The multistage system requires a smaller number of interconnections for a given number of inpuut-output nonblocking ports than the single stage system does. Here hologram elements were used to change interconnection beam paths. In order to increase the idffraction efficiency of the hologram elements in photographic plates, a bleaching technique was used, which converts the amplitude hologram to the phase hologram. To show sthe feasibility of our optical interconnection system, it was implemented using the bleached hologram arrays and an LCTV spatial light modulator, and the sytem as a photonic switching system was demonstrated.

• Journal of Ginseng Research
• /
• 제17권3호
• /
• pp.232-235
• /
• 1993

We investigated the effect of antioxidants (ascorbate, glutathione, and sodium azide), which efEectively inhibited the chlorophyll bleaching of Panax ginseng CA Meyer under the high light intensity, treated by folilar wiping on the early stage of photosynthesis and transpiration of ginseng in the 5000 $\mu$mol photon.$m^{-2}$.$s^{-1}$. Ascorbate and glutathione, endogenous antioxidant, completely recovered ginseng from the photoinhibition, but sodium azide, synthetic quencher, showed negative effect. We assumed that endogenous antioxidants could be available to the protection of the leaf-burning phenomenon of ginseng.