• Korean Journal of Food Science and Technology
• /
• v.19 no.5
• /
• pp.420-425
• /
• 1987

For use of sardine oil as an ingredient of food and feed, crude sardine oil obtained by rendering was processed to RBD sardine oil. Alkali deacidification was found to be most efficient with a concentration of 2.5N NaOH and 0.5% excess level at $75^{\circ}C$. Treatment with activated clay alone at $105^{\circ}C$ for 20 min without air admission was effective in reduction of the color intensity of the oil without any formation of the conjugated dienes and trienes of polyunsaturated fatty acids. In deodorization process, as the temperature was increased, color of the oil was to become lighter. The amount of conjugated compounds was, however, increased drastically at higher temperatures above $180^{\circ}C$ for 1hr. and content of polyunsaturated fatty acids was significantly decreased.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.365-373
• /
• 2003

Instead of deodorization appararus of fish oil, an adsorbent such as activated charcoal, activated alumina, silicagel, bamboo charcoal was packed in column alone or mixed with preparative ratio, and then test the effective deodorization with bleaching. In the progress of degumming, the effective method was 18 ml of 2.5% oxalic acid per 100m1 of crude large anchovy oil. The optical condition to deacidified was treating for 30 min at $40^{\circ}C$ with 2.5% sodium hydroride solution. The effective deodorization was added with 3% silicagel under the alone treating adsorbent, and mixed treating was 30% activated alumina and 10% silicagel but added to green tea powder was not effective. The major fatty acid of total lipid were 16:0, 20:5n-3, 18:1n-9, 16:1n-7 and 22:6n-3 after treatment of degumming, deacidfication and deodorizing in the large anchovy oil. The oxidative stability of refined anchovy oil added to $\alpha$-tocopherol was validated 20 days under the control, and 30 days in the case of $\alpha$-tocopherol. The 0.01% $\alpha$-tocopherol was more effective than 0.02% $\alpha$-tocopherol.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.175-180
• /
• 1992

For the effective utilizing of polyunsaturated lipids in filefish viscera wasted from marine manufactory the conditions of degumming, deacidification, decoloring and deodorization for the processing of refined viscera oil were investigated. In the process of refining degumming with 20$m\ell$ of 4% oxalic acid per 100$m\ell$ of crude filefish viscera oil resulted in the lowest residual phosphorus content as 115.8 ppm and optimal condition to neutralize the filefish viscera oil was treating for 30min at 60$^{\circ}C$ with 0.5% excess of 4M sodium hydroxide solution. Decoloring was optimized by adding 10% bleaching earth and treating for 20min at 60$^{\circ}C$ under vacuum, and deodorizing was done by steam distillation at 180$^{\circ}C$ under 4 torr of vacuum.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.175-180
• /
• 2016

The fluorine-containing modified polyurea was synthesized using the PTPE-diol to improve the ozone-resistance. Three types (PFDIA-10C, PFDIA-20C, PFDIA-30C) of the modified polyurea containing the fluorine content from 10 wt% to 30 wt% were prepared. After ozone treatment on the prepared films, the weight loss of film was investigated and analyzed the film properties such as hardness, wear resistance, tensile stress, elongation, etc. Also, the film surfaces were observed by the optical microscopy after ozone-resistance tests at 10 ppm for 336 h. It was shown that the defects such as the cracking, the bleaching and the mass loss were reduced and the ozone-resistance of films were improved when the contents of PFPE-diol are more than 20 wt%. It was found that the intensity of O-H peak in PFDIA compounds confirmed by FT-IR was decreased as fluorine contents were increasing.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.690-695
• /
• 1996

We have systematically investigated the characterization of V$_{2}$O$_{5}$ thin films as a counter electrode for lithium based complementary electrochromic devices. The V$_{2}$O$_{5}$ thin films were prepared by thermal vacuum evaporation with varing the substrate temperature and film thickness. In electrochromic devices for smart windows, the WO$_{3}$ thin films with 400-800 nm thickness require to be capable of reversibly injection 10-15 mC/cm$^{2}$ of lithium, which is readily accomplished charge-balanced switching in a V$_{2}$O$_{5}$ thin films with 100-150nm thick. The V$_{2}$O$_{5}$ thin films produces considerably small changes in optical modulation properties in the visible and near infrared region(500-1100 nm) compared to the amorphous WO$_{3}$ thin films on 10-15 mC/cm$^{2}$ of lithium injection and the V$_{2}$O$_{5}$ thin films can therefore act as a counter electrode to WO$_{3}$ in a lithium based complementary clectrochromic devices. After 10$^{5}$ coloration/bleaching switching time, the degradation does not occurs and the devices exhibit a stable optical modulation in V$_{2}$O$_{5}$ thin films. It has shown that the injected lithium ion amounts in crystalline V$_{2}$O$_{5}$ thin films with the same thickness is large by 3-5 mC/cm$^{2}$ of lithium compared to the amorphous thin films in the same driving conditions. Therefore, to optimize the device performance, it is necessary to choose an appropriate film thickness and crystallinity of V$_{2}$O$_{5}$ for amorphous WO$_{3}$ film thickness as a working electrode.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.388-393
• /
• 1999

In this study, the $CaSO_4:Eu$ TLDs are fabricated and their trap parameters are determined. The optimum concentration of Eu for fabrication of the $CaSO_4:Eu$ TLD is 0.5 mol% and optimum temperature is $600^{\circ}C$ for 2 hours sintering in air. The glow curve of $CaSO_4:Eu$ consists of two glow peaks and these peaks are isolated by thermal bleaching method. Trap parameters of two glow peaks are measured using the initial rise, the peak shape, the heating rate and the least square curve fitting methods. The activation energies of the glow peak I and II are 1.00 eV and 1.09 eV, and the frequency factors are $7.04{\times}10^{11}\;s^{-1}$ and $5.12{\times}10^{11}\;s^{-1}$ and the kinetic orders are 1.11 and 1.33, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.7
• /
• pp.930-938
• /
• 2012

High levels of xylanase activity (143.98 IU/ml) produced by the newly isolated Paenibacillus campinasensis G1-1 were detected when it was cultivated in a synthetic medium. A thermostable xylanase, designated XynG1-1, from P. campinasensis G1-1 was purified to homogeneity by Octyl-Sepharose hydrophobic-interaction chromatography, Sephadex G75 gel-filter chromatography, and Q-Sepharose ion-exchange chromatography, consecutively. By multistep purification, the specific activity of XynG1-1 was up to 1,865.5 IU/mg with a 9.1-fold purification. The molecular mass of purified XynG1-1 was about 41.3 kDa as estimated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Sequence analysis revealed that XynG1-1 containing 377 amino acids encoded by 1,134 bp genomic sequences of P. campinasensis G1-1 shared 96% homology with XylX from Paenibacillus campinasensis BL11 and 77%~78% homology with xylanases from Bacillus sp. YA-335 and Bacillus sp. 41M-1, respectively. The activity of XynG1-1 was stimulated by $Ca^{2+}$, $Ba^{2+}$, DTT, and ${\beta}$-mercaptoethanol, but was inhibited by $Ni^{2+}$, $Fe^{2+}$, $Fe^{3+}$, $Zn^{2+}$, SDS, and EDTA. The purified XynG1-1 displayed a greater affinity for birchwood xylan, with an optimal temperature of $60^{\circ}C$ and an optimal pH of 7.5. The fact that XynG1-1 is cellulose-free, thermostable (stability at high temperature of $70^{\circ}C{\sim}80^{\circ}C$), and active over a wide pH range (pH 5.0~9.0) suggests that the enzyme is potentially valuable for various industrial applications, especially for pulp bleaching pretreatment.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.364-371
• /
• 1999

본 연구는 테트라싸이클린에 의해 변색된 백서 치아에 대한 3 종 표백제의 표백효과를 비교하고 표백제의 침투 깊이 (법랑질 두께)에 따른 표백효과의 차이를 판별하기 위해 시행되었다. 30 마리의 웅성 백서에 매일 2주 동안 테트라싸이클린 용액을 복강내 주입하였다. 디스크 형태의 32개 백서 치아 표본을 16 시간 동안 자외선으로 조사하여 변색을 야기시켰다. 대조군은 생리 식염수에 보관하였으며 실험군은 3종 표백제(Opalescence, Rembrandt, NiteWhite)에 하루 5회씩 2주간 노출시켰다. 치아 색상을 표백전, 표백 1일, 3일, 5일, 7일, 9일, 11일, 및 14일에 각기 기록하여 치아내 변색부와 정상 색상간의 색상차 (${\Delta}$E)를 판독하였다; 대조군 - 9.78, 9.17, 9.36, 9.65, 9.40, 9.99, 10.57, 11.36; Opalescence - 10.08, 7.63, 6.72, 6.04, 5.10, 4.87, 4.89, 4.27; Rembrandt -9.83, 11.27, 9.55, 8.36, 7.75, 6.94, 7.11, 7.04; NiteWhite - 10.44, 9.92, 7.58, 6.80, 5.45, 5.05, 4.73, 4.01. 표백된 모든 치아들의 색상이 밝아졌다. (p<.01) 테트라싸이클린이 주입된 56개 백서 치아를 3 일간 자외선에 조사한 다음, 3가지 유형의 표백제 침투깊이를 설정하였다. 설측 상아질과 순측 법랑질을 통한 침투 (DN), 순측 법랑질만을 통한 침투 (RE), 1.0 mm 두께의 사람 법랑질로 피개된 순측 법랑질을 통한 침투 (HE). 표본들을 Opalescence로 하루 5회씩 1주일 및 4 주간 표백한 후 횡단하여 치아 색상을 측정하였다. 표백되지 않은 치아들을 대조군으로 이용하였다. 치아내 변색부와 정상 색상간의 색상차 (${\Delta}$E)는 다음과 같았다. 대조군 - 11.67; 1주 DN 군 - 13.55; 1주 RE군 - 12.80; 1 주 HE군 - 12.07; 4주 DN군 - 7.48; 4주 RE군 - 7.50; 4주 HE군 - 11.69. 4주 DN군과 4주 RE군의 색상 변화가 가장 크게 나타났다.(p<.01)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.