• Applied Biological Chemistry
• /
• 제28권2호
• /
• pp.51-55
• /
• 1985

검정콩의 조리중 색소(色素)의 용출(溶出)과 조리액의 당(糖)과 소금의 농도가 검정콩의 조리율(率)에 미치는 영향, 그리고 콩자반의 흡습성질(吸濕性質)을 밝히고저 본 실험을 실시하였다. 그 결과 검정콩의 침지수(浸漬水) 온도(溫度)가 $4^{\circ}C$에서 $100^{\circ}C$로 상승하면서 490nm에서의 흡광도가 증가하였으며 온도의 평형에 도달한 흡광도에 미치는 영향은 $A=0.0108t+0.1261(A=Absorbance,\;t=temp.\;^{\circ}C)$의 관계가 있었다. 색소용출의 활성화 에너지는 $60^{\circ}C$이상에서 4. 23kca1/mole. $60^{\circ}C$이하에서는 8.31kca1/mole이었다. 조리액(調理液)의 설탕과 소금의 농도 증가는 검정콩의 조리율(率)을 현저히 감소시켰으며 이러한 현상은 소금이 더욱 많은 영항을 주었다. 조리된 콩자반은 상대습도별로 두 가지의 온도($4^{\circ}C$와 $25^{\circ}C$)에서 저장하였을때 그 흡습특성이 달랐으며 수분활성도에 따른 콩자반의 등온흡습곡선(等溫吸濕曲線)은 온도에 따라 상이(相異)한 곡선을 보여 주었다. 저장기간에 따른 상대습도별 흡습속도는 $log(dw/dt{\times}10^3)=alogt+logb$의 식(式)에 대단히 높은 상관관계(r>0.99)를 보여 주었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.37-43
• /
• 2019

이 연구는 고성능 섬유보강 복합체(HPFRCC)의 전자파 차폐성능을 향상시키기 위한 목적으로 전기전도도, 전자파 차폐능, 역학적 강도를 조사하였다. 강섬유, 제강슬래그 미분말, 카본블랙이 전도성재료소 HPFRCC 배합에 첨가되었다. 또한, MWCNT를 수 분산 시켜 제조된 2% wt. CNT 용액을 사용하였다. 실험 결과, HPFRCC의 전기전도도는 1% 카본블랙이 첨가된 시편을 제외하고는 매우 낮은 특성을 보였다. 시멘트 매트릭스의 미세구조는 시간에 따라 변하였고, 그로 인해 HPFRCC의 전기전도성 네트워크에 부정적인 영향을 끼쳤다. 0.083 S/cm의 전도도를 갖는 HC1 시편의 경우, 수분에 의한 효과를 배제하기 위하여 72시간 60도에서 건조 양생한 후에 측정한 전기전도도가 0.0003 S/cm로 상당히 감소하였다. 전자파 차폐 성능에 가장 중요한 인자는 강섬유인 것으로 나타났으며, 반면 카본블랙과 제강슬래그 미분말의 효과는 미미하였다. 전기전도도와 전자파 차폐능의 상관관계는 이 연구에서는 뚜렸한 경향성을 나타내지는 않았다.

• 한국축산식품학회지
• /
• 제43권4호
• /
• pp.639-658
• /
• 2023

Although goat meat has several health benefits than other red meats but comsumers reluctant it due to its unpleasant flavor. This study aimed to investigate the odorant of goat meat as well as compare the quality traits of meat regarding sex status. The loin meats [non-castrated male (NCM), castrated male (CM), and female (FM)] were collected and stored at 4℃ in a laboratory refrigerator and analyzed on the 1^st, 5^th, and 8^th consecutive days. The moisture content was the lowest and the protein content was highest in FM (p<0.05). Fat and ash content in NCM and FM were similar while lowest in CM. The CIE L^* was significantly higher in NCM, but there were no significant differences of CIE a^* and CIE b^* within groups at initial day. The color intensity increased on the 5^th storage day and decreased again after the 8^th storage day, except in NCM. NCM displayed the highest thiobarbituric acid reactive substances value (p<0.05), whereas CM displayed a higher pH value than other groups throughout the storage period. Indole levels were the highest in NCM (0.031 mg/kg); however, skatole levels were not significant differences across all treatments (p>0.05). No significant difference was observed in the fatty acid composition between NCM and CM (p>0.05), whereas a significant difference was observed in FM (p<0.05). Most of the water-soluble metabolites showed significant differences between sexes. Overall, sex status effects on quality properties of meat and castration can improve the overall sensory acceptance by reducing goaty flavor of Korean native black goat meat.

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.72-80
• /
• 2014

Oxygen consumption (OC) of male black porgy Acanthopagrus schlegelii reared in freshwater (BFW) and seawater (BSW) during the reproductive period was $165.4{\pm}11.0$, $77.6{\pm}8.0$ mg $O_2/kg/h$ at $15^{\circ}C$, $186.2{\pm}13.1$, $133.4{\pm}6.7$ mg $O_2/kg/h$ at $20^{\circ}C$ and $267.9{\pm}19.1$, $198.6{\pm}8.3$ mg $O_2/kg/h$ at $25^{\circ}C$, respectively. During the non-reproductive period, it was shown as $174.0{\pm}7.0$, $85.6{\pm}5.5$ mg $O_2/kg/h$ at $15^{\circ}C$, $200.6{\pm}11.1$, $119.2{\pm}8.7$ mg $O_2/kg/h$ at $20^{\circ}C$ and $271.1{\pm}7.5$, $194.7{\pm}16.7$ mg $O_2/kg/h$ at $25^{\circ}C$, respectively. Thus, OC of BFW was higher than BSW both for non-reproductive and reproductive period. Also, OC increased in proportion to the rise in water temperature, and there was no difference of OC between BFW and BSW at each water temperature during the reproductive or non-reproductive period. OC of BFW and BSW showed clear circadian rhythms on photic conditions of reproductive and non-reproductive period, and the fish consumed more oxygen during the dark phase than for the light phase. In particular, OC of BFW during the reproductive period increased more sharply compared to non-reproductive period when the increase of water temperature was accompanied by the shift from dark to light phase. This implies that they react to the light more sensitively for reproductive period than for non-reproductive period.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.224-224
• /
• 2012

For decades, carbon fiber has expanded their application fields from reinforced composites to energy storage and transfer technologies such as electrodes for super-capacitors and lithium ion batteries and gas diffusion layers for proton exchange membrane fuel cell. Especially in fuel cell, water repellency of gas diffusion layer has become very important property for preventing flooding which is induced by condensed water could damage the fuel cell performance. In this work, we fabricated superhydrophobic network of carbon fiber with high aspect ratio hair-like nanostructure by preferential oxygen plasma etching. Superhydrophobic carbon fiber surfaces were achieved by hydrophobic material coating with a siloxane-based hydrocarbon film, which increased the water contact angle from $147^{\circ}$ to $163^{\circ}$ and decreased the contact angle hysteresis from $71^{\circ}$ to below $5^{\circ}$, sufficient to cause droplet roll-off from the surface in millimeter scale water droplet deposition test. Also, we have explored that the condensation behavior (nucleation and growth) of water droplet on the superhydrophobic carbon fiber were significantly retarded due to the high-aspect-ratio nanostructures under super-saturated vapor conditions. It is implied that superhydrophobic carbon fiber can provide a passage for vapor or gas flow in wet environments such as a gas diffusion layer requiring the effective water removal in the operation of proton exchange membrane fuel cell. Moreover, such nanostructuring of carbon-based materials can be extended to carbon fiber, carbon black or carbon films for applications as a cathode in lithium batteries or carbon fiber composites.

• 상하수도학회지
• /
• 제24권3호
• /
• pp.341-349
• /
• 2010

It is well known that manganese is hard to oxidize under neutral pH condition in the atmosphere while iron can be easily oxidized to insoluble iron oxide. The purpose of this study is to identify removal mechanism of manganese in the D water treatment plant where is treating bank filtered water in aeration and rapid sand filtration. Average concentration of iron and manganese in bank filtered water were 5.9 mg/L and 3.6 mg/L in 2008, respectively. However, their concentration in rapid sand filtrate were only 0.11 mg/L and 0.03 mg/L, respectively. Most of the sand was coated with black colored manganese oxide except surface layer. According to EDX analysis of sand which was collected in different depth of sand filter, the content of i ron in the upper part sand was relatively higher than that in the lower part. while manganese content increased with a depth. The presence of iron and manganese oxidizing bacteria have been identified in sand of rapid sand filtration. It is supposed that these bacteria contributed some to remove iron and manganese in rapid sand filter. In conclusion, manganese has been simultaneously removed by physicochemical reaction and biological reaction. However, it is considered that the former reaction is dominant than the latter. That is, Mn(II) ion is rapidly adsorbed on ${\gamma}$-FeOOH which is intermediate iron oxidant and then adsorbed Mn(II) ion is oxidized to insoluble manganese oxide. In addition, manganese oxidation is accelerated by autocatalytic reaction of manganese oxide. The iron and manganese oxides deposited on the surface of the sand and then are aged with coating sand surface.

• 패션비즈니스
• /
• 제18권5호
• /
• pp.159-170
• /
• 2014

Recent concerns about the PFOA(perfluorooctanoic acid), have been increasing, which is generally applied in the water-repellent finishing process of textile products. It has been proven through animal testing to be harmful to humans, as possible carcinogens and neuro-toxic material. Thus U. S. Environmental Agency has gone as far as requiring the material to be eliminated in its entirety by 2015. As a viable alternative to this water-repellent finishing agent, the development of C6 product is gaining its popularity. The effects of PFOA finishing on the silk fabrics were examined, and we reviewed parameters of the needed process for optimizing appearance and functionality of silk fabrics treated with eco-friendly water-repellent finishing agent. Cross-linking agent affected the most on black color of reactive ink, among the physical properties. The contact angle reading was the highest in $8g/{\ell}$ of concentration for all fabrics. All the fabric specimens, subjected to the DTP and water repellent finishing, exhibited higher stiffness, where rayon specimen showed the highest, compared to the untreated specimens. The results may provide basic information leading to the development of value-added silk fabrics with water-repellency without excessive deterioration of the delicate appearance and inherent soft touch.

• Journal of the Korean Wood Science and Technology
• /
• 제16권3호
• /
• pp.5-16
• /
• 1988

This experiment was executed to investigate the effect of activation of veneer surface by oxidizing agents, hydrogen peroxide and nitric acid, on bonding characteristics of Malas(Homalium foetidum Benth) plywood, in which the effects of these oxidizing agents amount, pretreatment time, and pressing time and temperatue on shear strength of the plywood were examined and discussed. In this research the activation of veneer surface by oxidants was effective in raising shear strength but the difference in shear strength was not observed between hydrogen peroxide and nitric acid treatment. Hydrogen peroxide treatment, however, seemed to be more profitable to industrial application because of its lower concentration and easier handling than nitric acid. The bonding method by lignin-phenol adhesive through surface activation revealed inferior shear strength to phenol- and urea-formaldehyde adhesive but superior water resistance to urea-formaldehyde adhesive and this bonding method, in addition, have the advantage of lower cost compared with phenol-formaldehyde adhesive, Therefore, this bonding method by lignin-phenol adhesive through surface activation seemed to economical in manufacturing of water-resistant wood panel materials in future.

• 한국콘텐츠학회논문지
• /
• 제10권11호
• /
• pp.154-161
• /
• 2010

주얼리 산업은 점차 다이아몬드와 진주의 거래량이 증가하면서 활기를 띄고 있으며 최근의 진주 시장은 여러 종류의 진주들이 수입되어 규모가 확대되었다. 이에 진주의 보석학 특성을 파악하고 진주의 새로운 디자인 개발의 필요성이 대두되고 있다. 본 연구는 시중에 판매되는 양식진주 중 흑회색(그레이)계열과 브라운계열의 담수진주를 보석학적인 방법으로 분석하였고 그 결과는 염색처리한 담수진주로 판명되었다. 현재 소비자들이 선호하는 초콜릿브라운과 그레이계열의 진주비즈를 사용한 디자인을 제안하고 CAD/CAM작업을 통한 예물 컨셉의 진주주얼리 디자인을 제안한다.

• 한국수산과학회지
• /
• 제51권3호
• /
• pp.286-297
• /
• 2018

We analyzed scientific observer data to identify species composition and catch trends of Korean tuna longline fisheries in the Indian Ocean. The data were collected by Korean scientific observers onboard Korean tuna longline fishing vessels in the Indian Ocean from 2010 to 2015. The observers identified 94 species including 5 tuna, 6 billfish, 11 shark, 7 other fish, 5 seabird and 1 sea turtle. Albacore tuna Thunnus alalunga and southern bluefin tuna Thunnus maccoyii were the dominant tuna species, and swordfish Xiphias gladius were the most commonly captured billfish. During the survey periods, 87 seabirds were incidentally bycaught. Black-browed albatross Diomedea melanophris was the dominant seabird species in bycatch, especially in 2010. Cluster analysis showed difference in the species composition of catches between the eastern and western Indian Ocean.