• 한국표면공학회지
• /
• 제32권6호
• /
• pp.647-657
• /
• 1999

Due to the inherently poor adhesion strength of Cu-based leadframe/EMC (Epoxy Molding Compound) interface, popcorn cracking of thin plastic packages frequently occurs during the solder reflow process. In the present work, in order to enhance the adhesion strength of Cu-based leadframe/EMC interface, black-oxide layer was formed on the leadframe surface by chemical oxidation of leadframe, and then oxidized leadframe sheets were molded with EMC and machined to form SDCB (Sandwiched Double-Cantilever Beam) and SBN (Sandwiched Brazil-Nut) specimens. SDCB and SBN specimens were designed to measure the adhesion strength between leadframe and EMC in terms of critical energy-release rate under quasi-Mode I ($G_{IC}$ ) and mixed Mode loading ($G_{C}$ /) conditions, respectively. Results showed that black-oxide treatment of Cu-based leadframe initially introduced pebble-like X$C_2$O crystals with smooth facets on its surface, and after the full growth of $Cu_2$O layer, acicular CuO crystals were formed atop of the $Cu_2$O layer. According to the result of SDCB test, $Cu_2$O crystals on the leadframe surface did not increase ($G_{IC}$), however, acicular CuO crystals on the $Cu_2$O layer enhanced $G_{IC}$ considerably. The main reason for the adhesion improvement seems to be associated with the adhesion of CuO to EMC by mechanical interlocking mechanism. On the other hand, as the Mode II component increased, $G_{C}$ was increased, and when the phase angle was -34$^{\circ}$, crack Kinking into EMC was occured.d.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.294-298
• /
• 2015

Blocking layers with nano carbon blacks (NCBs) were prepared by adding 0.0 ~ 0.5 wt% NCBs to the $TiO_2$ blocking layer. Then, dye sensitized solar cells (DSSCs) were fabricated with a $0.45cm^2$ active area. TEM and micro-Raman spectroscopy were used to characterize the microstructure and phases of the NCBs, respectively. Optical microscopy and AFM were used to analyze the microstructure of the $TiO_2$ blocking layer with NCBs. UV-VIS-NIS spectroscopy was used to determine the band gap of the $TiO_2$ blocking layer with NCBs. A solar simulator and potentiostat were used to determine the photovoltaic properties and impedance of DSSCs with NCBs. The energy conversion efficiency (ECE) increased from 3.53 to 6.20 % when the NCB content increased from 0.0 to 0.3 wt%. This indicates that the effective surface area and electron mobility increased in the $TiO_2$ blocking layer with NCBs. However, the ECE decreased when the NCB content was increased to over 0.4 wt%. This change occurred because the effective electron transport area decreased with the addition of excessive NCBs to the $TiO_2$ blocking layer. The results of this study suggest that the ECE of DSSCs can be enhanced by adding the appropriate amount of NCBs to the $TiO_2$ blocking layer.

• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 1998년도 제5차 학술발표회 발표논문집
• /
• pp.29-37
• /
• 1998

The sedimentary succession on the northern coast of Jindo and the adjacent area comprises the thinly bedded, fine-grained deposits of an epiclastic sandstone, siltstone, black shale/mudstone, and cherty mudstone (ca. 200m in vertical thickness), which are interpreted as the finely stratified turbidites mainly by density underflow-induced currents. Most deposits can be divided into eight facies: thin-bedded, ash-rich massive sandstone layer (mS), graded and laminated mudstone layer (glM), graded mudstone layer with ripple lamination (rM), laminated and graded siltstone layer (lgZ), finely laminated black shale layer (IBS), structureless mudstone layer (mM), thin-bedded cherty mudstone layer (lCM), and contorted and laminated mudstone layer (dlM), The thin-bedded, ash-rich sandstone facies is interpreted to be deposited from high-density turbid underflows during a relatively large flooding. Most thinly bedded mudstone facies would be deposited from low-density turbid underflows (turbidity currents) with some different hydrodynamic condition and sediment concentration during the high discharge of river water. Whereas the structureless mudstone facies may result from raining down of suspended sediment intermittently supplied by overflows and interflows. From the entire succession, graded and laminated mudstone layers interbedded with thin-bedded, ash-rich massive sandstone are dominant in the lower part of the succession, and graded mudstone layers with ripple lamination ripple lamination occur mainly in the middle part of it. On the other hand, iaminated/raded siltstone and contorted/laminated mudstone layers prevail in the upper part. The transition of facies association is suggestive of the continuous change of main depositional setting from basin plain to lower slope, which could be due to the movement of depocenter by the increase of sediment supply (volcanic activity).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.170-171
• /
• 2022

In recent years, due to the occurrence of traffic accidents caused by black ice in winter, the number of personal injuries is increasing rapidly. Black ice is a phenomenon that occurs like a thin layer of ice on the road surface. Accordingly, many developments of heat-generating concrete are being developed to remove ice by increasing the temperature by supplying constant electricity to places where black ice is likely to occur. These heating elements are being developed by mixing a conductive material represented by carbon nanotubes with concrete. However, research up to now has been focused on efficient temperature rise and derivation of the optimum mixing ratio, and the evaluation of maintaining heat generation performance during continuous repetition is insufficient. Therefore, in this study, a heating test specimen was manufactured and 50V power was repeatedly supplied to evaluate the heating characteristics.

• 센서학회지
• /
• 제15권2호
• /
• pp.90-96
• /
• 2006

We have fabricated the Pd-blck/NiCr gate MISFET-type $H_2$ sensor to detect the hydrogen in atmosphere. A differential pair-type structure was used to minimize the intrinsic voltage drift of the MISFET. The Pd-black film was deposited in the argon environment by thermal evaporation. In order to eliminate the blister formation in the surface of the hydrogen sensing gate metal, Pd-black/NiCr double metal layer was deposited on the gate insulator. The scanning electron microscopy and the auger electron spectroscopy was used to analyze their surface morphology and basic structure. The Pd-black/NiCr gate MISFET has been shown high sensitivity and stability more than Pd-planar/NiCr gate MISFET.

• 보존과학회지
• /
• 제35권6호
• /
• pp.573-587
• /
• 2019

본 연구는 전통적인 철화분청사기 안료를 재현하기 위하여 국내산 자철석과 점토, 비가소성 원료를 혼합하여 재현시편을 제작하고, 발색이 양호한 30개의 시편들을 과학적으로 분석함으로써 유약의 발색특성을 알아보고자 하였다. 안료의 주원료인 자철석은 1,200℃의 환원 환경에서 짙은 흑색으로 발색하는 안료이나, 부가적으로 첨가되는 석회 성분과 반응하여 1,230℃ 산화 환경에서는 녹황색 계열로 변색된다. 적철석은 소성 온도 및 환경에 크게 영향을 받지 않으나 Fe를 10 wt% 이상 함유한 점토와 혼합하였을 때는 짙은 흑색으로 발색한다. 안료의 유동성은 R₂O₃/RO₂ 값에 의해 결정되며, 이는 발색에도 영향을 미친다. 미세조직 관찰에서 안료의 입자크기와 소성 환경에 따라 유약층의 발색과 철산화물 결정들이 일부 다른 양상을 보인다. 자철석을 원료로 한 안료는 1,200℃ 산화 환경에서는 유약층과 분장토의 경계면에 철산화물이 응집체 형태로 존재하며, 흑갈색으로 발색하지만, 환원 환경 소성에서는 철산화물의 응집체가 존재하지 않고 유약층에 균질하게 분포하며, 짙은 흑색으로 발색한다. 반면, 적철석을 기반으로한 안료는 산화 환경에서 유약층내 수지상 조직을 형성하며, 흑색으로 발색한다.

• 환경영향평가
• /
• 제20권2호
• /
• pp.187-198
• /
• 2011

The objective of this study is to analyze the flora and forest vegetation of trails with high visitor density at Molundae. Nine quadrats of $20{\times}20m$ were selected for the survey. The survey was conducted from April to October 2010. The obtained results are summarized as follows. Plot1, plot2, plot3, plot4, plot6, and plot7 were located at slopes of $5{\sim}20^{\circ}$, 17~40m above sea level, and were formed with the colony of Japanese black pine(Pinus thunbergii Parl) and Japanese black pine(Pinus thunbergii Parl)-white oak(Quercus aliena Blume). Tree layer had the height of 8~20m, and the coverage of 50~70%, while subtree layer had the height of 3-8m, and the coverage 30~80%. On the other hand, shrub layer had the height of 2~4m, and the coverage of 10~30%, and herb had the height of 0.2~1m and coverage 5~20%. Plot5, plot8, and plot9 were located at the summit areas of 57~78m above sea level, and $0^{\circ}$ slope. Japanese black pine(Pinus thunbergii Parl) formed a community there. Tree layer was 8~20m high, and covered 60~70%, of the area, and subtree layer was 6~8m high, and coverage 30~40%. Shrub layer had the height of 2~6m, and the coverage of 30%, while herb layer had the height 0.2~2m, and the coverage 20-80%. Succession does not occur in the surveyed areas which have high visitor density. Artificially planted sawtooth oak(Quercus acutissima) trees were found to disturb succession and formation of multi-layer vegetation, resulting in the ecologically unstable forest. Therefore, the researcher suggested the strategy of managing the vegetation in the conclusion. This study has the limit in that the plots selected for the survey reflected only part of various trails in the Molundae area. It is necessary to suggest the vegetation management plans by selecting more diverse trail areas in consideration of the visitor density and behaviors, and analyzing the changes in vegetation quantitatively in order to manage the vegetation in urban areas damaged by visitors more effectively.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 임시총회 및 하계학술연구발표회
• /
• pp.159-159
• /
• 2016

• 한국정보통신학회논문지
• /
• 제25권12호
• /
• pp.1835-1845
• /
• 2021

본 논문에서는 블랙 아이스를 정확하게 인식하고 도로 노면 정보를 운전자에게 미리 알려줘서 속도를 제어하고 예방 조치를 취할 수 있도록 하기 위해 열화 도로 영상을 기반으로 블랙 아이스 검출하기 위해 lightweight 네트워크를 제안한다. 전이학습을 이용하여 블랙 아이스 인식 실험을 하였고, 블랙 아이스 인식의 정확도 향상을 위해 MobileNetV2 기반의 개선된 lightweight 네트워크를 개발하였다. 계산량을 줄이기 위해 Linear Bottleneck 및 Inverted Residuals를 활용하여 4개의 Bottleneck 그룹을 사용하고 모델의 인식률 향상을 위해 각 Bottleneck 그룹에 3×3 컨볼루션 레이어를 연결하여 지역적 특징 추출을 강화하고 특징 맵의 수를 늘렸다. 마지막으로 구축된 블랙 아이스 데이터 세트 대상으로 블랙 아이스 인식 실험을 진행하였으며, 제안된 모델은 블랙 아이스에 대해 99.07%의 정확한 인식률을 나타내었다.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.284-289
• /
• 2015

This study examined carbon layer coating on silicon carbide (SiC) fibers by utilizing solid-state and wet chemistry routes to confer toughness to the fiber-reinforced ceramic matrix composites, as an alternative to the conventional pyrolytic carbon (PyC) interphase layer. Electrophoretic deposition (EPD) of carbon black nanoparticles using both AC and DC current sources, and the vacuum infiltration of phenolic resin followed by pyrolysis were tested. Because of the use of a liquid phase, the vacuum infiltration resulted in more uniform and denser carbon coating than the EPD routes with solid carbon black particles. Thereafter, vacuum infiltration with controlled variation in phenolic resin concentration, as well as the iterations of infiltration steps, was improvised to produce a homogeneous carbon coating having a thickness of several hundred nanometers on the SiC fiber. Conclusively, it was demonstrated that the carbon coating on the SiC fiber could be achieved using a simpler method than the conventional chemical vapor deposition technique.