• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.129-132
• /
• 2001

Biometabolic assessment was made in early and late embryonic stage (just before hatching) of one poly, one bi and their hybrids (DP, YPe, DP ${\times} Ype, and YPe ${\times} DP respectively ) of Bombyx mori to observe the racial differences. Protein and nucleic acid (RNA and DNA) concentrations were recorded to be significantly higher in bivoltine breed (YPe) and also in the hybrid than the polyvoltine (DP) strain in both the stages of embryonic development. The single egg weight of polyvoltine race was lower as compared to that of bivoltine and the hybrid studied. Age specific changes in all the biomolecules were evident where protein and RNA concentrations were elevated sharply in prehatched larvae while in case of DNA it was observed to be just reverse. The differences in protein, RNA and DNA composition between breeds and hybrids reflect the racial variations in biometabolic demands responsible for differential growth and development of the breeds and hybrids.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.1
• /
• pp.34-43
• /
• 2023

The eighteen (18) F₁ hybrid combinations were tested to identify potential combinations adaptable to type 1 climatic conditions in the Philippines. The six (6) bivoltine purelines (DMMMSU 108, DMMMSU 109, DMMMSU 110, DMMMSU 111, DMMMSU 113, and DMMMSU 119); and three (3) multivoltine purelines (DMMMSU 1000, DMMMSU 1007, and DMMMSU 1014), were crossed (multivoltine x bivoltine) in a mating plan. These were arranged in a Completely Randomized Design (CRD), replicated three times, and analyzed using Analysis of Variance (ANOVA). A test of significance was done using ANOVA across years and Tukey's Honest Significant Difference Test (HSD). The multiple trait evaluation index (EI) method was also used in the identification of potential F₁ hybrids. Three major phases were done: (1) parental rearing of multivoltine and bivoltine pure lines for breed multiplication; (2) hybridization process; and (3) evaluation of F₁ hybrids. Rearing evaluations were conducted for three consecutive years. Based from the three evaluations, 10 potential crosses were identified: DMMMSU MV-12, DMMMSU MV-11, DMMMSU MV-13, DMMMSU MV-16, DMMMSU MV-07, DMMMSU MV-14, DMMMSU MV-05, DMMMSU MV-09, DMMMSU MV-03, and DMMSU MV-10. The topmost combinations with the best economic and commercial characters and are consistently adaptable during two (2) cropping seasons were DMMMSU MV-07, DMMMSU MV-12, DMMMSU MV-05, DMMMSU MV-09 and DMMMSU MV-11. These newly-identified F₁ hybrids are considered potential breeds that could improve cocoon production.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.2
• /
• pp.73-77
• /
• 2006

Combining ability and hybrid vigour analysis was carried out in hybrids between newly developed non-susceptible lines to BmDNV1 and popular bivoltine breeds for certain quantitative traits viz. Pupation rate, Cocoon yield, Cocoon weight, Cocoon shell weight and Cocoon shell ratio, Survival rate against BmIFV and BmNPV. General combining ability (GCA) effects revealed that among the lines CSR2DR was found good general combiner exhibiting significant GCA effects for six characters, out of seven traits evaluated. Among testers CSR28DR was found as good combiner exhibiting significant GCA effects for six traits. Out of 36 hybrids made between $resistant{\times}resistant,\;resistant{\times}susceptible\;and\;susceptible{\times}susceptible$ breeds, one hybrid $CSR21DR{\times}CSR28DR$ exhibited significant SCA effects for six traits. The selected hybrid $CSR21DR{\times}CSR28DR$ also exhibited significant positive heterosis and heterobeltiosis expressions for maximum traits and could be exploited as commercial silkworm hybrid resistant to important viral diseases.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.79-85
• /
• 2010

Eight bivoltine inbred lines of silkworm Bombyx mori L. viz., AP8, AP10, AP17 and AP18 with marked female and plain male larvae and AP1, AP54, AP71 and AP72 with all plain larvae synthesized from Chinese commercial hybrids were evaluated for their general combining ability (gca), specific combining ability (sca) and reciprocal effects for eight quantitative traits. The line AP18 was found to be best general combiner by virtue of significant positive and positive gca effects for seven out of eight traits studied followed by the lines AP10, AP8 and AP17. Seven hybrids recorded significant positive and positive sca effects for all the traits under study reflecting the interaction of alleles, additive and non additive gene action and dominant effects expressed by genes. Among the 28 reciprocal hybrids, AP54$\times$AP18 and AP1$\times$AP17 revealed significant reciprocal effects for the six traits followed by AP54$\times$AP8 for five and AP10$\times$AP71 for four traits.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.1
• /
• pp.13-21
• /
• 2013

Boil-off loss ratio is one of the most important economic traits to be considered during the course of silkworm breeding. The boil-off loss ratio varies among the breeds and seasons. The present study was undertaken with 5 oval and 5 peanut breeds and twenty five hybrids involving these parents to select the promising hybrids with desired boil-off loss ratio. Accordingly, studies were undertaken to estimate the heterosis and heterobeltiosis. It was observed that majority of the hybrids revealed negative heterosis for boil-off loss ratio which is desirable. Based on the heterosis and heterobeltiosis, among all the hybrids, the hybrid APBRO5 ${\times}$ APBRD5 exhibited highest negative heterosis for boil-off loss ratio and also exhibited highest EI value (64.5) for the quantitative and qualitative traits. Based on the hybrids performance, boil-off loss ratio, heterosis and heterobeltiosis and evaluation index, the hybrids viz. APBRO5 ${\times}$ APBRD5, APBRO1 ${\times}$ APBRD1 and APBRO3 ${\times}$ APBRD4 were identified for commercial exploitation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.31 no.2
• /
• pp.115-126
• /
• 2015

The tropical climate prevailing in India adversely affects temperate bivoltine silkworm rearing and causes crop loss especially during summer. Identification of high temperature tolerant bivoltine breeds by screening for thermotolerance in the silkworm, Bombyx mori (Lepidoptera: Bombycidae) is an essential prerequisite for the development of thermotolerant bivoltine breeds / hybrids. Therefore, in this study, 20 silkworm breeds were reared at different temperatures (25 ± 1℃,32 ± 1℃, 34 ± 1℃ and 36 ± 1℃) for 6 h every day from 3^rd d of 5^th instar to till spinning. Significant differences (p < 0.01) were found among all the rearing traits over temperature. Based on pupation percentage, SK4C and BHR3 were identified as thermotolerant bivoltine breeds. Hierarchical clustering analysis based on rearing traits at tested temperatures grouped 20 silkworm breeds in four clusters which included one cluster each of susceptible and tolerant, and two clusters of moderately tolerant silkworm breeds. This suggests that clustering based on rearing data at high temperatures by using Euclidean distance can be an effective approach in classifying the silkworm breeds on their thermotolerance capacity. The identified breeds would be used for development of thermo tolerant bivoltine silkworm breeds / hybrids.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.1
• /
• pp.31-35
• /
• 2001

Ten newly evolved bivoltine hybrids of silkworm (Bombyx mori L) were evaluated with control hybrid KA${\pm}$NB4D2 during three seasons of a year for their seasonal performance. Analysis of variance and other statistical methods were employed and the performance was observed in respect of 10 quantitative traits. The results showed significant genotype${\pm}$environment interaction with respect to four quantitative characters viz. fecundity, yield/10,000 larvae, filament length and raw silk (%). Environmental effects were significant for nine characters out of ten characters evaluated. A 105${\pm}$J2 and B${\pm}$NB4D2 were considered as highly adaptable hybrids to local conditions with high mean for maximum characters studied and found suitable to rear in all seasons.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2007

Three newly authorized bivoltine silkworm hybrids namely, $CSR2{\times}CSR4$ (productive single hybrid), $(CSR6{\times}CSR26){\times}(CSR2{\times}CSR27)$ (productive double hybrid) and $CSR18{\times}CSR19$ (robust single hybrid) were chosen for the present study. These hybrids were subjected to different temperature and humidity treatments i.e., $25{\pm}$1^{\circ}C and RH $65{\pm}5%$ (control), $30{\pm}1^{\circ}C$, with combinations of low relative humidity (RH $65{\pm}5%$) and high RH ($85{\pm}5%$) at different stages during rearing and spinning of silkworm larvae. The larvae of after 3rd moult were subjected to different thermal and humidity stress till the assessment of cocoon traits. The comparative rearing and reeling performance clearly indicated that the deleterious effect of high temperature and high RH was more pronounced for the majority of traits such as cocoon uniformity, cocoon weight, shell weight, shell percentage, reelability, filament length, raw silk percentage raw silk recovery denier and waste percentage on silk weight than other temperature and RH treatments and this effect was almost similar for all three silkworm hybrids studied. The present investigation clearly indicate that the deleterious effect of high temperature and high RH was more pronounced on rearing and spinning of silkworm larvae than other temperature and RH treatments and similar effect was noticed for all the three silkworm hybrids studied. The cocoon characters can be improved by providing ideal environmental conditions even during spinning stage of larvae affected with high temperature and RH. The study also suggest that high temperature and low humidity has greater effect during rearing stage than spinning stage.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.37-43
• /
• 2002

Eighteen new bivoltine silkworm (Bombyx mori L.) hybrids developed at Andhra Pradesh State Sericul-ture Research and Development Institute, Hindupur are evaluated for 10 economic traits by following two multiple trait index methods, i.e., Subordinate Function and Evaluation Index for their economic merit. The hybrid genotype, APS6${\times}$APS11 with highest Subordinate function value of 8.2432 and highest average Evaluation Index of 61.67 ranked first. This hybrid is adjudicated as most promising hybrid and recommended for commercial use. Further, applicability of Subordinate Function Index Method is tested and recommended for application of multiple trait evaluation similar to Evaluation Index Method as the results obtained are comparable. Further, both these methods can be applied for confirmation of results.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.1
• /
• pp.53-58
• /
• 2004

Studies on heterotic expression in the silk productivity of 66 thermo-tolerant bivoltine hybrids reared under high temperature $(36{\times}1^{\circ}C)$ and low humidity (60${\times}$5%) conditions revealed that manifestation of heterosis was highly significant for majority of the quantitative traits contributing to more cocoon productivity. Observations were made on 8 economically important traits such as fecundity, pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, cocoon filament length and raw silk. Analysis of variance results revealed great deal of variability indicating significant (P < 0.001) variations. Out of 66 hybrids, 7 hybrids exhibited positive heterosis for seven traits and 4 hybrids expressed significant hetero-beltiosis for 6 traits, out of 8 traits evaluated. Based on results, the hybrids ${SR_1} {\times} {SR_5}and {CSR_2} {\times} {SR_5}$ are adjudged as most promising ones and can be exploited commercially in tropical climates to increase the cocoon productivity.