• ETRI Journal
• /
• v.30 no.2
• /
• pp.255-260
• /
• 2008

We compare the performance of a wavelength remodulated wavelength-division-multiplexed passive optical network implemented using Manchester-coded or inverse-return-to-zero (IRZ)-coded signal downstream and non-return-to-zero remodulated signal upstream. We investigate the effects of varying differences between downstream and upstream bit rates on the two coding schemes. When the bit rate ratio of upstream to downstream is less than or equal to 50%, the performance of Manchester coding is better than that of IRZ coding. However, when the bit rate ratio of upstream to downstream is higher than 50%, Manchester code requires appropriate time delay between upstream and downstream signals, whereas IRZ code needs reduced extinction ratio in the downstream signal.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.32-39
• /
• 1996

Hybrid decision decoding for the extended hamming codes without retransmission, which is a combination of hard and soft decision decoding, is proposed and its performance is analyzed in this paper. As results, hybsrid decision decoding shows a little bit higher residual bit error rate than soft decision decoding. However, as the size of the extended hamming code increases, the difference of th enumber of comparisons increases further. In addition, hybrid decision decoding shows almost same residual bit error rate as hard decision decoding with retrassmission and shows much lower residual bit error rate than hard decision decoding without retransmission.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.263-266
• /
• 1999

In this work, a A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10MS/s for video applications. This architecture is proposed using the Pipelined architecture for high speed conversion rate and the Successive - Approximation architecture for low power consumption, and consists of two identical stages that consist of sample/hold circuit, low power comparator, voltage reference circuit and MDAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.25${\mu}{\textrm}{m}$ CMOS technology The SNR is 80㏈ at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10MS/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are $\pm$0.5 / $\pm$2 LSB, respectively. The power consumption is 13㎽ at 10MS/s.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.448-455
• /
• 1996

In this paper, we have proposed a VQ algorithm which uses a generating order to make quantize feature vector of speech signal. The proposed algorithm inspects what codeword follows a(ter present codeword and adds new index to established codebook, when mapping speech signal. We present a variable bit rate for new codebook, and propose an efficient compressed way of information. In this way, the number of computation and the number of codewords to be searched are reduced considerably. The performance of the proposed VQ algorithm is evaluated by spectrum distortion measure and bit rate. The obtained spectrum distortion is reduced about 0.22 [db], and the bit rate is saved over 0.21 bit/frame.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.623-627
• /
• 2016

A power-adjustable fully-integrated CMOS optical receiver with multi-rate clock-and-data recovery circuit is presented in standard 65-nm CMOS technology. With supply voltage scaling, key features of the optical receiver such as bandwidth, power efficiency, and optical sensitivity can be automatically optimized according to the bit rates. The prototype receiver has −23.7 dBm to −15.4 dBm of optical sensitivity for 10⁻⁹ bit error rate with constant conversion gain around all target bit rates from 1.62Gbps to 8.1 Gbps. Power efficiency is less than 9.3 pJ/bit over all operating ranges.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.577-583
• /
• 2000

An efficient echo cancellation method, which controls the echo caused from the PSTN, is proposed. In our situation, the PSTN is connected to the mobile subscriber and the base-station which use different bit-rate CVSD(continuously variable slope delta modulation) coders and echo canceller is installed at the location of the base-station. By using the symmetry of the coder pairs. the proposed method shortens the echo pate length and reduces the nonlinear distortion inherent in the coders. And it is implemented in the decoded signal region, so fitted to the general-purpose DSP implementation. We also proposed a echo cancellation method using the combined bit-stream so as to implement without the multipliers onto the VLSI. It has an improved echo cancellation performance by reducing the high frequency noises in the coders. And it has an reduced complexity by reducing the excitation rate of the bit-stream.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.229-237
• /
• 2014

This paper presents a video bitrate converter for baseline profile in H.264/AVC standards to control a selective coding scheme for several applications such as tactical scenes or multimedia area. Transmission channels have various capacities according to the application area, and the bitstream stored in computer should be converted in order not to exceed the capacities of a transmission channel. So the problem is how to convert compressed bitsreams of a given bit-rate into compressed bitsreams of other bit-rates. Such a specific transcoding problem in this paper is referred to as bit-rate conversion. Several researches have been done on bit-rate conversion for the bitstreams compressed by MPEG or H.264/AVC. But the existing schemes are not suitable for selective coding scheme because it needs to recover interest regions better image quality than background. So we propose a new bit-rate converter which considers the importance between interest regions and background.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.333-338
• /
• 2000

MPEG2(or some situations, MPEG is mostly used to change the raw image into the compressed bitstreams for digital image processing. Also these bitsreams are stored in computer for several applications such as multimedia area. Transmission channels have various capacities according to the application area, and the bitstreams stored in computer should be converted in order not to exceed the capacities of a transmission channel. So the problem is how to convert compressed bitstreams of a given bit-rate into compressed bitstreams of other bit-rates. Such a specific transcoding problem in this paper is referred to as bit-rate conversion. Several researches have been done on bit-rate conversion for the bitstreams compressed by MPEG. But the existing schemes are not suitable fort MPEG4 applications because it needs to transmit shape information( which is not necessary for MPEG2) as well as texture information in MPEG4 system. So we propose a new bit-rate converter which considers both texture and shape information.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.45-50
• /
• 2007

We present a auto compensating quantum key distribution system based on optical fiber at 1550nm. In the quantum key transmission system, main control board and phase modulation driving board are fabricated for auto controlling quantum key distribution(QKD). We tested the single photon counts per dark counts for a single photon detector, quantum key distribution rate($R_{sift}$) and the quantum bit error rate (QBER). Quantum bit error rate of 3.5% in 25km QKD is obtained. This system is commercially available.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.54-58
• /
• 2007

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for distortion variation minimization. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performances than the existing rate control method.