• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1709-1716
• /
• 2007

In this paper, ADC with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB$ and $0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.109-117
• /
• 2019

Recently, the invasion of privacy in medical information has been issued following the interest in the secondary use of mass medical information. The mass medical information is very useful information that can be used in various fields such as disease research and prevention. However, due to privacy laws such as the Privacy Act and Medical Law, this information, including patients' or health professionals' personal information, is difficult to utilize as a secondary use of mass information. To do these problem, various methods such as k-anonymity, l-diversity and differential-privacy that can be utilized while protecting privacy have been developed and utilized in this field. In this paper, we discuss the differential privacy processing of the various methods that have been studied so far, and discuss the problems of differential privacy using Laplace noise and the previously proposed differential privacy. Finally, we propose a new scheme to solve the existing problem by adding a 1-bit status field to the last column of a given data set to confirm the response to queries from analysts.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.731-748
• /
• 2010

Impact detection and health monitoring are very important tasks for civil infrastructures, such as bridges. Piezoceramic based transducers are widely researched for these tasks due to the piezoceramic material's inherent advantages of dual sensing and actuation ability, which enables the active sensing method for structural health monitoring with a network of piezoceramic transducers. Wireless sensor networks, which are easy for deployment, have great potential in health monitoring systems for large civil infrastructures to identify early-age damages. However, most commercial wireless sensor networks are general purpose and may not be optimized for a network of piezoceramic based transducers. Wireless networks of piezoceramic transducers for active sensing have special requirements, such as relatively high sampling rate (at a few-thousand Hz), incorporation of an amplifier for the piezoceramic element for actuation, and low energy consumption for actuation. In this paper, a wireless network is specially designed for piezoceramic transducers to implement impact detection and active sensing for structural health monitoring. A power efficient embedded system is designed to form the wireless sensor network that is capable of high sampling rate. A 32 bit RISC wireless microcontroller is chosen as the main processor. Detailed design of the hardware system and software system of the wireless sensor network is presented in this paper. To verify the functionality of the wireless sensor network, it is deployed on a two-story concrete frame with embedded piezoceramic transducers, and the active sensing property of piezoceramic material is used to detect the damage in the structure. Experimental results show that the wireless sensor network can effectively implement active sensing and impact detection with high sampling rate while maintaining low power consumption by performing offline data processing and minimizing wireless communication.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.269-279
• /
• 2021

Purpose: The purpose of this study was to suggest weapon system specifications for requirements of Condition-Based Maintenance(CBM/CBM⁺). Methods: The military documents and case studies with regard to condition-based maintenance were reviewed. Representative Korea defense specifications of weapon system such as an aircraft, a C4ISR etc. were analyzed and investigated the level of requirement for maintainability was. Results: Condition-based maintenance was defined in both U.S. instruction and Korean directive. While deparment of defense(U.S.) provide a guidebook for CBM⁺, detailed instruction was not sufficient for Korean. Ministry of national defense(ROK) define the CBM⁺ by means of IPS element which should be developed along with the system development. The maintainability was barely included in Korean defense specifications, except for BIT(Built-in test) function. As a first step for defining the condition-based maintenance requirement in defense specification, this study suggests a standard form for data needed to acquire according to types of system, fault, failure, and so on. Conclusion: The empirical researches on CMB/CBM⁺ with domestic weapon systems are not enough, and a logic which leads the maintenance strategy to CMB/CBM⁺ is not solved. Through technical researches and institutional improvements including this study, we hope that condition-based maintenance would be fully established in the Korean defense field.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.11
• /
• pp.33-50
• /
• 2021

Purpose: In South Korea, two kinds of mandatory insurance, Fierce Liability Insurance and Outdoor Advertising Liability Insurance sells as of February 2021 according to relevant codes. This study analyzed third party liability and personal living liability insurance in terms of various risks not corporation side but personal side arising from normal living and life. Research design, data and methodology: Some cases of drone accident hit man and fierce dog accident were taken into analysis to verify blame ratio and insurance claim money. The former case is that on the way down the elevator, the dog, American pit bull terrier rushed in and bit the lower part of the knee against the visitor. The latter case is that while flying in the sky as usual, the drone suddenly crashed, fell, and hit the head of a young child while walking on the street. Further previous studies such as third party liabilities, liability insurance, mandatory insurance were deeply analyzed. Results: Based on some case studies and previous studies, the author suggested valuable comments in turn realization of insurer as provider, exhaustive creation and operation of mandatory insurance, realization of insured as demanded, and arrangements of laws and systems in special consideration of amendment of companion animal and exhaustive execution of mandatory insurance by the government. Conclusions: This study was about third party liability, personal living liability insurance and expansion of mandatory insurance caused by relevant laws by the government. In this study the author verified what issues were observed from two cases drone accident and fierce dog accident and then suggested some valuable comment as above both systemic plans and practical plans. First of all, the individual should get Comprehensive Property Insurance(CPI) that covers the risks of his/her own property arising from the everyday life. And then the individual should further buy Personal Living Liability Insurance(PLLI) in order to prepare 'accidents that may happen when, where, or how' and overcome the said accidents. Moreover, the individual should take a look every single insurance contract whether he/she has a special terms and conditions of Personal Living Liability Insurance(PLLI) or not.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.304-313
• /
• 2021

This paper presents the results of a sea trial for long range underwater acoustic communication conducted in the East Sea in November 2020. Signals were collected through a moving transmitter and 16 vertically arranged receivers, and the range between the transmitter and receiver was about 20 km. The signal in the experiment is a conventional Direct Sequence Spread Spectrum (DSSS) method and a superimposed DSSS method that increases data rate by superimposing of multiple circulated Pseudo Noise (PN) sequences for each symbol. The results show that the uncoded bit error rate averaged over 16 channels to which the channel coding technique was not applied was 0.0005 for the conventional direct sequence spreading method, and was 0.00124 for the superimposed direct sequence spreading method.

• Korean Journal of Social Welfare Studies
• /
• v.47 no.3
• /
• pp.139-159
• /
• 2016

This study aims to investigate the wage gap between male and female workers at social welfare institutions and to determine its factors. For this purpose, a Blinder-Oaxaca decomposition and regression models are applied to analyze wage survey data. The results are as follows. Firstly, the gender wage gap of social workers is a bit smaller, compared to the average of wage earners. Secondly, about two-thirds of wage gap is due to differences in productivity(endowment) factors; the other part is due to discrimination. Thirdly, the most important cause of gender wage gap is career disruptions of female workers largely due to marriage and birth. Fourthly, other causes of gender wage gap include differences in education, in job grade, in employment status, and in the characteristics of institutions. Finally, among the discriminating factors worsening gender wage gap, a key factor is a gender discrimination in the compensation for age.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.35-45
• /
• 2018

Motion Estimation(ME) has been developed to reduce the redundant data in digital video signal. ME is an important part of video encoding system, However, it requires huge computational complexity of the encoder part, and fast motion search methods have been proposed to reduce huge complexity. Multi- view video is obtained by capturing on a three-dimensional scene with many cameras at different positions and its complexity increases in proportion to the number of cameras. In this paper, we proposed an efficient motion method which chooses a search pattern adaptively by using the temporal-spatial correlation of the block and the characteristics of the block. Experiment results show that the computational complexity reduction of the proposed method over TZ search method and FS method can be up to 70~75% and 99% respectively while keeping similar image quality and bit rates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.798-801
• /
• 2014

Nowadays, the demand for multimedia services has grown with the rapid evolution in the digital era. But due to external causes in the process of processing, transmitting and storing image data, the images are damaged. One of the major causes of such damage is known to be noise. Some of the most commonly used methods for removing noise are CWMF(center weighted median filter), A-TMF(alpha-trimmed mean filter) and AWMF(adaptive weighted median filter). However, these filters all leave a bit to be desired in removing noise in a complex noise environment. Therefore this paper suggest an image restoration filter algorithm that first judges the noise and sets a adjustment weight based on the median value and distance of the mask to remove the complex noise. For an objective analysis, the results were compared against existing methods and the PSNR(peak signal to noise ratio) was used as a reference.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.259-263
• /
• 2019

This study was purpose to compare image quality of Indirect digital radiography (IDR) system by using the International electro-technical commission standard(IEC 62220-1) which were applied to IEC in medical imaging. To evaluation the analysis of Modulation transfer function(MTF) measurements edge device each angle by using edge method. In this study, Aero (Konica, Japan) which is Indirect flat panel detector(FPD) was used, the size of image receptor matrix $1994{\times}2430$ which performed 12bit processing and pixel pitch is $175{\mu}m$. In IEC standard method were applied to each angle were compared. The results of shown as LSF at $2.0^{\circ}$ and $3.0^{\circ}$ angeles. Shape is constant and shows smooth shape. The amount of data seemed reasonable and 2.19 cycles/mm and 2.01 cycles/mm at a spatial frequency of $2.0^{\circ}$ and $3.0^{\circ}$ at an MTF value of 0.1. At an MTF value of 0.5, the spatial frequencies were $2.0^{\circ}$ and 1.11 cycles/mm and 0.93 cycles/mm at an angle of $3.0^{\circ}$. This study were to evaluate MTF by setting the each $2{\sim}3^{\circ}$ each angle and to suggest the quantitative methods of measuring by using IEC.