• The Journal of Korean society of community based occupational therapy
• /
• v.2 no.2
• /
• pp.61-69
• /
• 2012

Objective : The purpose of this study was to investigate the effect of left visual stimuli for reducing the severity of unilateral neglect. Method : This research used a reversal design(ABAB) of single case study. The subject was a 60-year-old male patient who had left unilateral neglect. Remedial approach is more valuable method than compensatory approach in term of reducing the unilateral neglect. One of the method of remedial approach is controlled sensory stimulation. Result : I performed the line bisection test before and after the stimulation, and while doing that, put blinking lights to the patient from the left side. The average errors in the line bisection test decreased in B B', the intervention period, compared with A A'. The MVPT left response behavior score increased from 13 to 18. Conclusion : This shows that the light stimulation is effective in the reduction of unilateral neglect.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.108-113
• /
• 1998

By using an equivalent network based on Floquet's theorem and bisection principle, the optical properties of planar DFB guiding structure are evaluated. The optical parameters, such as Bragg condition and the reflectivity as a function of grating period, are numerically calculated. The numerical results reveal that this method offers a simple and convenient algorithm to analyze the optical characteristics of DFB configurations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2508-2515
• /
• 1996

Determination of an optimal feed rate is valuable in the sense of the precision and efficient machining. In this regard, a new surface roughness model for the face milling operation that considered the radial and axal runouts of the inserts in the cutter body was developed. The validity of the model was proved through the cutting experiments, and the model is able to predict the real machined surface roughness exactly with the information of the insert runouts and the cutting conditions. From the estimated surface roughness value, the maximum feed rate that obtains a maximum naterial removal rate under the given surface roughness constraint can be selected by using a bisection method. Therefore, this mehod for optimizing the feed rate can be well applied to the using a bisection method. Therefore, this method for optimizing the feed rate can be well applied to the using selsction of the cutting condition during the NC data generation in CAM.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.229-234
• /
• 2006

This paper presents an advanced method of simulation for EM(electromagnetic) environment that affects on mobile receivers. A new calibration algorithm in the process of simulation is introduced. With a proposed calibration method, the time required for simulation is reduced and this makes it possible to simulate a near-real time EM environment in a shielded anechoic chamber. EM environment data acquisition and logging techniques with GPS for simulation were developed.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2003

We suggest Bisection method, Fixed point method and Newton's method for finding the intersection point of a nonparametric surface and a line in $R^3$ and apply ray-tracing in Color Picture Tube or Color Display Tube.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.41-49
• /
• 2007

BCI system integrates control or telecommunication system with generating electric signals in scalp itself after signal acquisition. This system detect a movement of EEG at real time, can control an electron equipment using a generated signal through EEG movement or software-based processor. In this paper, we deal with removing and separating artifacts induceced from measurement when brain-computer interface system that analyzes recognizes EEG signals occurred from various mental states. In this paper, we proposed a method of EEG classification and an artifact interval detection using bisection mathematical modeling in the EEG classification process for BCI system implementation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.54-61
• /
• 2011

In this paper, a simple analytical model for deriving the I-V characteristics of a cylindrical surrounding gate SOI MOSFET with intrinsic silicon core is suggested. The Poisson equation in the intrinsic silicon core and the Laplace equation in the gate oxide layer are solved analytically. The surface potentials at both source and drain ends are obtained by means of the bisection method. From them, the surface potential distribution is used to describe the I-V characteristics in a closed-form. Simulation results seem to show the dependencies of the I-V characteristics on the various device parameters and applied bias voltages within a range of satisfactory accuracy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.173-178
• /
• 1995

This paper presents a new method to obtain parameters of end-mill cutting system. For high speed milling and precision surface finish, we have to predict the deflection of tool and the critical depth of cut. The cutting system can be modeled to a vibratory system to obtain the deflection of tooll and the critical depth of cut. A new method of the modeling of one degree of freedom system was developed using bisection method, ARMA(Autoregressive Moving average) and impact test.

• Journal of Educational Research in Mathematics
• /
• v.8 no.2
• /
• pp.745-752
• /
• 1998

컴퓨터의 급속한 보급으로 시각화는 수학 교육자사이의 논의에 자주 등장하는 소재가 되었다. 우리는 다양한 소프트웨어를 사용하여 준비한 수업에 학생들로 임하게는 하지만 거의 그들의 사고 발달과정에는 관심을 갖지 못하고 있다. 이 논문은 구성주의(Constructivism)와 정보처리체계(Information-Processing System)에 입각하여 수학의 시각화를 생각해보고 어떻게 시각화 환경을 준비해야하는지 논해보고자 하였다. 구성주의의 시각화에서는 반영적 추상(reflective abstraction), 반복되는 경험(repeated experience), 그리고 지식 위계성이 학습의 기능 체계를 이루므로 발견적 학습을 통해 학생 스스로 의미를 구성할 수 있도록 Thomas (1992)의 세 가지 제안을 이용하여 수업을 준비할 수 있다. 정보처리체계에서는 지식은 서술적인 것과 과정적인 것으로 나뉘어지고, 시각적 표상을 수록하고 삭제하는 과정과 조작 가능한(manipulative) 환경과의 상호작용으로 기호적 시각으로 표상을 변화하는 과정을 통해 개념을 습득하게된다. 시각화는 스키마와 개념상을 통해서 일어난다. 그래프, 애니메이션, 그리고 다른 시각적 표상 등은 이 개념상에 직접적 효과를 주므로 매우 중요하다. 이런 논란을 바탕으로 교사는 반영적 추상화를 위해 시간을 충분히 제공해야하고, 비슷한 문제를 가지고 여러번 시도를 할 수 있게 하며, 학생을 잘 관찰하여 그들의 지식 위계성을 이해하고 방향을 제시하며, 논리적이고 잘 연결된 시각적 표상을 제공하고, 상징적 사관으로 확장할 수 있게 조작할 수 있는 환경에서 시각화에 대해 학생과 많은 대화를 하도록 수업을 준비해야한다. 그한 예로 타원을 가르치기 위해 몇 가지 테크놀로지를 활용한 시각화 환경을 구성해보았다.ates of bisected bovine embryos by micromanipulator and micropipett were 29.2% and 19.1%, respectively. The rates of non-bisection embryos(46.7%) were significantly higher than those of bisection embryos. 2. The in vitro developmental rates of bisected bovine embryos by micromanipulator, micropipett and pipetting method were 32.4%, 19.4% and 25.6%, respectively.3. The in vitro developmental rates of with and without-zona pellucida of bisected bovine embryos by raicromanipulator were 30.8% and 25.0%, respectively. The rates of nonbisection embryos(53.1%) were significantly higher than those of bisection embryos.랑크톤 군집내 종 천이와 일차생산력에 크게 영향을 미칠 수 있음을 시사한다.TEX>5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.ments of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.273-280
• /
• 2017

As massive integration technology of transistors has been developing, multi-core circuit is fabricated on a silicon chip and a clock frequency is getting faster to meet the system requirement. But increasing the clock frequency can induce some problems to violate the operation of system such as clock synchronization, so it is very import to avoid metastability events to design digital chips. In this paper, metastability windows are measured by bisection method in H-spice depending on temperature, supply voltage, and the size of transmission gate with D-FF designed with 180nm CMOS process. The simulation results show that the metastability window(: MW) is slightly increasing to temperature and supply voltage, but is quadratic to the area of a transmission gate, and the best area ration of P and Ntransitor in transmission gate is P/N=4/2 to get the least MW.