• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.267-274
• /
• 2013

본 논문은 Pulse Frequency Modulation(PFM)/Pulse Width Modulation(PWM) 듀얼 모드 피드백 기반 LED 백라이트 유닛 구동용 LLC 공진 변환 제어 IC 설계에 대한 내용을 제시한다. 공진형 변환기에서 하나의 변압기를 사용하면서, 두 가지 출력 전압을 생성할 수 있는 구조를 제안하였으며, Master 출력은 PFM 방식으로 Slave 출력은 PWM 방식으로 제어하도록 설계 하였다. 2차 측 Master 출력을 제어하기 위해서 파워 스위치 제어 신호의 주파수를 조절하는 PFM 피드백과 2차 측 Slave 출력을 제어하기 위해서 파워 스위치 제어 신호의 펄스 폭을 조절하는 PWM 피드백 회로를 설계하였다. 설계된 IC는 $0.35{\mu}m$ 2 Poly 3 Metal BCD(Bipolar-CMOS-DMOS) 공정을 이용하여 레이아웃 되었으며, 면적은 $2.3mm{\times}2.2mm$ 이다. 또한, 설계한 칩은 5 V 공급 전압으로부터 26 mA의 전류를 소모하였다.

• 대한전자공학회논문지SD
• /
• 제45권10호
• /
• pp.1-6
• /
• 2008

고전압 MOSFET에서 스냅백 이후의 유지 전압은 구동전압에 비해 매우 작아서 고전압 MOSFET이 파워 클램프로 바로 사용될 경우 래치업 문제를 일으킬 수 있다. 본 연구에서는 Drain-Extended PMOS를 이용하여 래치업 문제가 일어나지 않는 구조를 제안하였다. 제안된 구조에서는 래치업의 위험을 피하기 위해 소자가 스냅백이 일어나지 않는 영역으로 동작 영역을 제한하였다. $0.35\;{\mu}m$ 60V BCD(Bipolar-CMOS-DMOS) 공정을 사용하여 제작된 칩을 측정한 결과를 통해 제안된 기존의 gate-driven 구조의 LDMOS(Lateral Double-Diffused MOS)를 사용한 ESD 파워 클램프에 비해 500% 성능향상(강인성)이 있게 된 것을 알 수 있다.

• 한국진공학회지
• /
• 제19권1호
• /
• pp.45-51
• /
• 2010

마그네트론 타겟에서 일어나는 다양한 물리적 현상에 의한 결과로 인해 발생하는 타겟 표면의 온도를 측정함으로써 그 분포가 플라즈마, 혹은 증착되는 박막에 영향을 줄 수 있는 가능성을 분석하였다. 마그네트론 스퍼터링의 타겟은 크게 원형 타겟과 사각 타겟으로 구분되는데, 사각 타겟에서는 자기장에 의한 corner effect 등에 의해 전자 집중 방전 영역이 발생하고 그것에 의해 타겟 표면에서 불균일한 온도분포가 생성됨을 확인했다. 국부적으로 온도가 높게 올라가는 지역은 비스퍼터링 지역에 비해 $10{\sim}20^{\circ}C$ 정도 높았으며, 스퍼터링 공정 시 문제점 중에 하나인 particle이 발생하면 그 부분에서 온도가 $20^{\circ}C$ 정도 더 상승함을 알 수 있었다. 이런 영향은 증착되는 박막의 균일도에도 적지 않은 영향을 주었으며 세라믹 타겟의 경우, 균열의 원인이 될 수 있고, 불균일한 타겟 침식으로 타겟의 수명을 단축시키는 문제를 유발하기도 한다.

• 신재생에너지
• /
• 제17권2호
• /
• pp.50-58
• /
• 2021

We proposed an MEA development methodology that accurately measures intrinsic MEA performance while considering the uneven reaction environments formed inside a large-area BP. To facilitate measurement of the inherent MEA performance, we miniaturized the active area of the MEA to 3 cm², and prepared two MEAs with different ionomer contents of 0.65 and 0.80 (I/C). By simulating the operating conditions of a 100 cm² BP at the inlet (I), center (C), and outlet (O), the oxygen concentration and relative humidity were determined to be 20.7, 13.8, 11.7%, and 50, 66.1, and 70.1% respectively. We measured the performance and electrochemical analysis of the prepared MEAs under the three simulated conditions. Based on the results of statistical analysis of the evaluated MEA performance data, I/C 0.65 MEA had a higher average performance and lower performance deviation than I/C 0.80 MEA. Hence, it can be concluded that an I/C 0.65 MEA is a more effective MEA for large-area BP. Based on the above research process, we confirmed the effectiveness of the proposed MEA development methodology.

• 천문학회보
• /
• 제41권2호
• /
• pp.42.1-42.1
• /
• 2016

The formation process and the dynamical properties of a large-scale quasi-circular flare ribbon were investigated using the SDO AIA and HMI data along with data from RHESSI and SOT. Within one hour time interval, two subsequent M-class flares were detected from the NOAA 12371 that had a ${\beta}{\gamma}{\delta}$ configuration with one bipolar sunspot group in the east and one unipolar spot in the west embedded in a decayed magnetic field. Earlier M2.0 flare was associated with a coronal loop eruption, and a two-ribbon structure formed within the bipolar sunspot group. On the other hand, the later M2.6 flare was associated with a halo CME, and a quasi-circular ribbon developed encircling the full active region. The observed quasi-circular ribbon was strikingly large in size spanning 650" in north-south and 500" in east-west direction. It showed the well-known sequential brightening in the clockwise direction during the decay phase of the M2.6 flare at the estimated speed of 160.7 km s-1. The quasi-circular ribbon also showed the radial expansion, especially in the southern part. Interestingly, at the time of the later M2.6 flare, the third flare ribbon parallel to the early two-ribbon structure also developed near the unipolar sunspot, then showed a typical separation in pair with the eastern most ribbon of the early two ribbons. The potential field reconstruction based on the PFSS model showed a fan shaped magnetic configuration including fan-like field lines stemming from the unipolar spot and fanning out toward the background decayed field. This large-scale fan-like field overarched full active region, and the footpoints of fan-like field lines were co-spatial with the observed quasi-circular ribbon. From the NLFF magnetic field reconstruction, we confirmed the existence of a twisted flux rope structure in the bipolar spot group before the first M2.0 flare. Hard X-ray emission signatures were detected at the site of twisted flux rope during the pre-flare phase of the M2.0 flare. Based on the analysis of both two-ribbon structure and quasi-circular ribbon, we suggest that a tether-cutting reconnection between sheared arcade overarching the twisted flux rope embedded in a fan-like magnetic field may have triggered the first M2.0 flare, then secondary M2.6 flare was introduced by the fan-spine reconnection because of the interaction between the expanding field and the nearby quasi-null and formed the observed large-scale quasi-circular flare ribbon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1025-1027
• /
• 1995

SEG(Selective Epitaxial Growth) and ELO(Epitaxial Lateral Growth) of Silicon offer new opportunities in the fabrication of MEMS(Micro Electro-Mechanical Systems) structures. SEG of silicon enables the stacking of junctions in addition to those resulting from the standard bipolar process and this properly was utilized for the fabrication of an improved-performance color sensor. When the crystalline growth takes place through the seed windows and proceeds over the dielectric, after reaching the surface, it form an ELO silicon layer and this ELO-Si can be modified into various structures for MEMS application such as cantilevers, beams, diaphragms.

• 대한수의학회지
• /
• 제12권1호
• /
• pp.121-126
• /
• 1972

The pneumonic lungs of 51 pigs, from which the presence of pasteurella organisms was confirmed by bipolar staining, were examined pathologically. The numbers of pigs in each age group were 22 (43.1%) in 3-4 month group, 20 (39.2%) in 1-2 month group, 7 (13.7%) in 5-6 month group, and 2 (4.0%) in group of more than one year. The lungs of 16 pigs which were regarded as pasteurella pneumonia without any other manifestations were studied pathogically. Grossly, the affected lungs showed pulmonary edema, lobular consolidation and interlobular edema. Pigs over 3 months of age frequently showed chronic condition in which the entire lobe was involved as confluent pneumonia. In such pneumonic lungs, infarction and focal necrosis of the lung parenchyma and deposition of fibrinous exudate on the pleura were encountered. Histologically, the alveolar spaces were filled with fibrinous and leukocytic exudates. The interlobular septae showed marked edema and fibrinous exudate. The process of organization was frequently observed in chronic cases.

• ETRI Journal
• /
• 제7권4호
• /
• pp.11-14
• /
• 1985

바이폴라 소자로 구성된 회로가 양호한 특성을 갖기 위해서는 개별 소자의 동작 속도, 집적도 및 전력 소비 특성이 좋아야 한다. 그런데 지금까지 주로 사용해온 기존의 SBC 바이폴라 트랜지스터로는 이들 특성을 개선하는 데는 한계가 있었다. 일반적으로 바이폴라 트랜지스터는 면적이 줄어듦에 따라 이들 특성이 개선되므로 본 연구에서는 SBC 방법과는 다른 PSA 공정 방법을 개발하였다. 즉, 소자 격리에서의 종래의 PN 접합에 의한 방법과 다른 산화막에 의한 방법을 도입하였고 또한 에미터, 베이스 사이의 거리를 최소로 줄이기 위하여 다결정 실리콘에 의한 polysilicon self-align 방법으로 에미터 및 베이스를 형성시켰다.

• 센서학회지
• /
• 제23권6호
• /
• pp.392-396
• /
• 2014

The 2-dimensional silicon vertical Hall devices, which are sensitive to X,Y components of the magnetic field parallel to the surface of the chip, are fabricated using a modified bipolar process. It consists of the thin p-layer at Si-$SiO_2$ interface and n-epi layer to improve the sensitivity and influence of interface effect. Experimental samples are a sensor type K with and type J without $p^+$ isolation dam adjacent to the center current electrode. The results for both type show a more high sensitivity than the former's 2-dimensional vertical Hall devices and a good linearity. The measured non-linearity is about 0.8%. The sensitivity of type J and type K are about 66 V/AT and 200 V/AT, respectively. This sensor's behavior can be explained by the similar J-FET model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.605-611
• /
• 2001

A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The morphological shape of aggregates was described in terms of the fractal dimension. The fractal dimension for the uncharged aggregate was $D_{f}=1.761$. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states.