• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.77-82
• /
• 2017

We proposed the objective ROC analysis method based on the setting of threshold value for evaluation of single photon emission computed tomography (SPECT) image. This proposed ROC analysis method uses the quantification computational threshold value to each signal on the SPECT image. The SPECT images for this study were acquired by using Monte Carlo n-particle extended simulation code (MCNPX, Ver. 2.6.0, Los Alamos National Laboratory, USA). The basic SPECT detectors and specific water phantom were realized in the simulation, and we could get the simulation results by the simulation operation. We tried to analyze the reconstructed images using threshold value application based objective ROC method. We can get the accuracy information of reconstructed region in the image. This proposed ROC technique can be helpful when we have to evaluate the weak signal for the NM image. In this study, the proposed threshold value based computational ROC analysis method can provide better objectivity than the conventional ROC analysis method.

• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.186-191
• /
• 2006

In general, Cerenkov light is produced by a charged particle that passes through a medium with a velocity greater than that of visible light. Although the wavelength of Cerenkov light is very broad, the peak is in the almost visible range from 400 to 480 nm. Therefore, it always causes a problem to detect a real light signal that is generated in the scintillator on the fiber-optic sensor tip for dose measurements of high-energy electron beam. The objectives of this study are to measure, characterize and remove Cerenkov light generated in a fiber-optic radiation sensor tip to detect a real light signal from the scintillator. In this study, the intensity of Cerenkov light is measured and characterized as a function of incident angle of electron beam from a LINAC, and as a function of the energy of electron beam. As a measuring device, a photodiode-amplifier system is used, and a subtraction method using a background optical fiber is investigated to remove Cerenkov light.

• Journal of Marine Bioscience and Biotechnology
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2020

Asthma is a complex inflammatory disease of the lung characterized by variable airflow obstruction, airway hyperresponsiveness, airway inflammation, and reduction of respiratory function. Its prevalence and incidence are increasing because of the effect of various environmental and lifestyle risk factors. Steroid inhalation, long-acting agonists, and other synthetic drugs are used for the treatment of this disease. However, they have some side effects and show unsatisfied result and response after treatment. Therefore, many researchers have focused on the development of natural product-related treatment for asthma to suppress the side effects and unsatisfied results. Seaweeds contain various bioactive compounds with anti-inflammatory, antibacterial, and anti-oxidant activities. Thus, we investigated the asthma treatment-related literature using marine algae via the Google scholar search engine. Consequently, the literature is rarely investigated, but is increasing steadily. The literature was performed as a comparison study with an ovalbumin-induced group or drug-treated group, and investigated the antiasthma activity of algae ethanol extract. Although many researchers have studied marine algae-derived therapeutic agents for asthma, the amount of literature is rare compared with those of herbal medicine-derived therapeutic agents. Conclusively, we suggest that many researchers should investigate and develop algae-derived therapeutic agents for asthma treatment.

• Biomedical Science Letters
• /
• v.12 no.2
• /
• pp.119-125
• /
• 2006

In relation to the tissue engineering, the cellular responses to the morphology of the scaffold surface are interesting topics. Human ligament fibroblasts (HLFs) were cultured on the micrpatterned silicone substrates subjected to cyclic stretch to simulate ligament motion. Groove and ridge width of silicone substrates was 10/50, 20/50, 20/10, and 20/20 ${\mu}m$ (groove/ridge ${\mu}m$) with a depth of $3{\mu}m$. Strain was applied over two days for 4 hours per day with a frequency of 0.5 Hz with the magnitudes of 4 or 8%. The purpose of this study was to evaluate ligament fibroblast alignment and cellular responses in relation to the pattern of microgrooved surface and stretching magnitude. Ligament fibroblasts in the microgrooved surface were elongated and aligned parallel to the microgrooves under no stretch. Uniaxial cyclic stretch induced cellular activities and their orientation rise in cellular response and the cells showed alignment and elongation perpendicular to the direction of the stretch. Biochemical analyses showed that the best cellular response was found on the $20/50{\mu}m$ under 8% stretch. The surface morphology and mechanical stretching were found to contribute to increase of proliferation, collagen production.

• Biomedical Science Letters
• /
• v.18 no.2
• /
• pp.123-130
• /
• 2012

In this study, we evaluated the human papillomavirus (HPV) genotyping test called MolecuTech REBA HPV-$ID^{(R)}$ (YD Diagnostics, Seoul, Korea) for 704 women who also had cervical cytological evaluations by Thin Prep. The infection rate of high-risk HPV genotypes was 56.6% in patients with normal cytology, 59.8% in those with benign, low-grade squamous intraepithelial lesions, 51.4% in those with atypical squamous cells of uncertain significance, 92.3% in those with high-grade squamous intraepithelial lesions, and 94.1% in those with squamous cell carcinoma or adenocarcinoma. HPV 16 was the most common genotype detected in any lesion, followed by HPV 53, 58, 33, 52, 45, 31, and 35, in order. The HPV DNA test with PCR-REBA is a very highly sensitive, but less specific, method. The infection rates and HPV genotype distribution of non-Korean people versus people from South Korea showed regional differences.

• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.242-248
• /
• 2013

Endotoxins are part of the outer membrane of the cell wall of gram-negative bacteria and are continuously released during bacterial growth. Endotoxins typically induce severe sepsis and septic shock, which cause more than 50% of mortalities. Endotoxins are easily measured in the serum by the limulus amebocyte lysate (LAL) test. However, a nonspecific result is obtained, because the high concentration of serum proteins disturbs the enzyme reaction of the LAL test. In order to solve this problem, the LAL test was performed in this study after the centrifugation of the boiled serum samples to remove the impurities. As a result, among the various conditions examined, endotoxin measurement with the LAL test was the most accurate and repeatable after centrifugation of the boiled serum at $100^{\circ}C$. Moreover, the endotoxin was accurately and repeatedly measured from the prepared sera of mice that had been administered an intraperitoneal injection of purified lipopolysaccharides (LPS) or E. coli. Therefore, the application of centrifugation to remove impurities from boiled serum gives an accurate measurement of endotoxins in the sera of normal subjects or patients, and this will lead to the improved diagnosis and prevention of diseases caused by endotoxins. In addition, the centrifugation of boiled serum samples should be considered and included in the development of endotoxin test kits.

• Biomedical Science Letters
• /
• v.19 no.1
• /
• pp.9-16
• /
• 2013

Elevated blood triglyceride (TG) levels correlate with development of atherosclerosis suggesting that TG may promote the development of this disease. During atherosclerosis, TG is taken up by tissue macrophages which result in dramatic changes in various secreted factors. One such factor is the family of matrix metalloproteases (MMP) which are involved in tissue remodeling during both physiological and pathological processes. In this study, we examined the MMP expression profile in PMA-differentiated THP-1 macrophages treated with TG. We found that TG-treated THP-1 macrophages showed decreased expression of MMP-3, MMP-7, MMP-8 and MMP-9 in a time- and dose-dependent manner. In contrast, expression of MMP-1, MMP-2, and MMP-10 remained relatively unchanged after TG treatment. In addition, we found that expression of select MMPs was affected by various inhibitors of signaling pathways. In particular, expression of MMP-3 was slightly recovered by cRAF and PLC signaling pathway inhibitors. These data suggests a possible role of MMPs in macrophages during TG-induced atherosclerosis.

• Biomedical Science Letters
• /
• v.20 no.4
• /
• pp.237-243
• /
• 2014

Triglyceride (TG) can cause death of macrophages and formation of foam cells thereby increasing inflammation in atherosclerotic plaques. Accumulation of cholesterol in macrophages is another critical event that promotes development of inflammatory cardiovascular diseases. Several proteins are known to transport intracellular cholesterol outside of the cell and these proteins are thought to be protective against atherosclerosis pathogenesis. It is unknown whether TG can affect cholesterol efflux in macrophages. In the current study, we examined mRNA expression levels of genes that promote efflux of cholesterol (ABCA1, ABCG1 and SR-B1). We found that TG treated THP-1 macrophages exhibited an increase in ABCG1 expression in a dose- and time-dependent manner. In contrast, the expression of ABCA1 and SR-B1 remained unchanged. To identify cell signaling pathways that participate in up-regulation of ABCG1, THP-1 macrophages were treated with various cell signaling inhibitors. We found that inhibition of the JNK and p38 MAPK pathway completely abrogated up-regulation of ABCG1 whereas inhibition of MEK1 further enhanced ABCG1 expression in TG treated THP-1 macrophages. Also, TG induced phosphorylation of JNK and p38 MAPK in THP-1 macrophages. These results suggest that TG may potentially influence cholesterol efflux in macrophages.

• Health Policy and Management
• /
• v.20 no.2
• /
• pp.69-88
• /
• 2010

The effective administration of hospital with innovation and human resource practices is a matter of grave concern because hospitals are becoming bigger and more specialized. Biomedical engineers who manage medical machineries and tools used to deliver healthcare services in a hospital setting play an important role in providing customers good quality services. Maintaining job satisfaction of biomedical engineers is, thus, important in the delivery of quality care. This is a descriptive cross-sectional study aiming to determine factors affecting job satisfaction of biomedical engineers working in general hospitals. The study population consisted of biomedical engineers at 79 general hospitals of 26 regions based on the registry of the Korea Medical Engineering Association (KMEA). The data were collected using a self-administerd questionnaire between May and July of 2009. Job satisfaction was assessed with 19 items covering 3 dimensions of work-external, work-internal, and organizational aspects (Cronbach's ${\alpha}=0.884$), resulting in an average summary score. Statistical analysis was conducted with SPSS for Windows version 15.0. The mean score of job satisfaction was 3.50 (${\pm}0.04$). There were statistically significant differences in job satisfaction according to age, health status, job position, duration of work as a biomedical engineer, years in the current workplace, difficulty at work, intent to change job, and the amount of support from superiors and colleagues. In multiple regression analysis, the factors affecting job satisfaction of biomedical engineers were salary, health status, and support of superiors and colleagues ($r^2=0.512$). Effective motivation-plans, taking into account organizational characteristics and the working environment of the hospital, may help to improve the job satisfaction of biomedical engineers.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.232-235
• /
• 2016

The purpose of this study is to develop the treatment planning system (TPS) based on Monte-Carlo simulation for BNCT. In this paper, we will propose a method for dose estimation by Monte-Carlo simulation using the CT image, and will evaluate the accuracy of dose estimation of this TPS. The complicated geometry like a human body allows defining using the lattice function in MCNPX. The results of simulation such as flux or energy deposition averaged over a cell, can be obtained using the features of the tally provided by MCNPX. To assess the dose distribution and therapeutic effect, dose distribution was displayed on the CT image, and dose volume histogram (DVH) was employed in our developed system. The therapeutic effect can be efficiently evaluated by these evaluation tool. Our developed TPS could be effectively performed creating the voxel model from CT image, the estimation of each dose component, and evaluation of the BNCT plan.