• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.2
• /
• pp.59-62
• /
• 2006

Seaweed biotechnology is a multidisciplinary subject to produce food, pharmaceuticals, chemicals, and environmental remediation materials from seaweed resources. It uses various techniques of cell culture, enzyme reaction and genetic manipulation to increase the production efficiency of useful seaweeds or their products. Firstly, an overview of key topics will be introduced in the fields of seaweed tissue culture, strain improvement, genetic analysis briefly as basic techniques. Secondly, some biologically active substances such as anti-inflammatory and antifouling substances that have been screened in my laboratory will be focused.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.27-30
• /
• 2005

New possibilities are discussed for cholesteric liquid crystals (CLC) as sensor materials for detection of ionizing radiation, biologically active UV radiation, and the presence of hazardous vapors in atmosphere. A distinguishing property of CLC-based detectors is their 'bioequivalence', i.e., mechanisms of their response to external factors essentially imitate the corresponding mechanisms of biological tissues. Such detectors can ensure sufficiently high sensitivity to make feasible their use as alarm indicators or in biophysical studies. Specific examples ate given of sensor compositions and their response characteristics.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.691-709
• /
• 2007

Concerns on environmental waste problems caused by non-biodegradable petrochemical-based plastic packaging materials as well as consumer's demand for high quality food products has caused an increasing interest in developing biodegradable packaging materials using annually renewable natural biopolymers such as polysaccharides and proteins. However, inherent shortcomings of natural polymer-based packaging materials such as low mechanical properties and low water resistance are causing a major limitation for their industrial use. By the way, recent advent of nanocomposite technology rekindled interests on the use of natural biopolymers in the food packaging application. Polymer nanocomposites, especially natural biopolymer-layered silicate nanocomposites, exhibit markedly improved packaging properties due to their nanometer size dispersion. These improvements include increased mechanical strength, decreased gas permeability, and increased water resistance. Additionally, biologically active ingredients can be added to impart the desired functional properties to the resulting packaging materials. Consequently, natural biopolymer-based nanocomposite packaging materials with bio-functional properties have huge potential for application in the active food packaging industry. In this review, recent advances in the preparation and characterization of natural biopolymer-based nanocomposite films, and their potential use in food packaging applications are addressed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.1
• /
• pp.9-18
• /
• 2007

Nanocomposite has been considered as an emerging technology in developing a novel food packaging materials. Polymer nanocomposites exhibit markedly improved packaging properties due to their nanometer size dispersion. These improvements include increased barrier properties pertaining to gases such as oxygen, carbon dioxide, and water vapor, as well as to UV rays, and increased mechanical properties such as strength, stiffness, dimensional stability, and heat resistance. Additionally, biologically active ingredients can be added to impart the desired functional properties to the resulting packaging materials. New packaging materials created with this technology demonstrate an increased shelf life with maintaining high quality of the product. Nanotechnology offers big benefits for packaging. Nanocomposite technology paves the way for packaging innovation in the flexible and rigid packaging applications, offering enhanced properties such as greater barrier protection, increased shelf life and lighter-weight materials.

• Applied Biological Chemistry
• /
• v.36 no.2
• /
• pp.134-137
• /
• 1993

Yongia sonchifolia Max. has been used as raw materials of traditional Kimchi and medicinal herb in Korea. This study was performed to investigate biologically active components in the plant. First, the writer carried out the experiment of antitumor screening test against Sarcoma-180A and the cytotoxic activity against Chinese hamster V-79 cells with methanol extract of the plant. And the aqueous solution of the extract from roots of Youngia sonchifolia Max. was partitioned into n-hexane. The concentrated extract of n-hexane layer was chromatographed on silica gel column and developed with n-hexane and ethylacetate. Two yellow elutes, on concentration, were recrystallized from ethylacetate, and the $R_f$ value of TLC of the crystal was 0.43. After analysis by $^{1}H-NMR$, $^{13}C-NMR$ and MS to confirm the structure, the author could identify the compound as bauerenyl acetate, a naturally occurring pentacyclic triterpene. The crystal was colorless plate and m.p. was $280{\sim}282^{\circ}C$.

• Journal of Life Science
• /
• v.17 no.11
• /
• pp.1555-1561
• /
• 2007

In order to know the effects of scoria, germanium, charcoal, ginger, stevia, and CLA(Conjugated Linoleic Acid) as biologically active materials on pathogenic microbes and rumen anaerobic microbes, the growth rate of pathogens (including Escherichia coli O157, Salmonella paratyphi, Listeria monocytogenes and Staphylococcus aureus) and in vitro lumen microbial growth, gas production, ammonia concentration, carboxymethyl-cellulase (CMCase) activity, and microbial populations were investigated. The growth of pathogenic microbes was inhibited by the supplement of 0.10% ginger. Ginger had powerful antimicrobial properties on all the pathogens used in this experiments. Additionally in the antibacterial assay by paper disc method, we could observe the clear zone of similar area with the positive control(antibiotics) for E. coli as applied with the 10% stevia or the 10% CLA only. The supplements of ginger, stevia and CLA in vitro rumen fermentation inhibited populations of rumen bacteria and protozoa. Particularly supplement of ginger resulted in remarkable reduction of the protozoa population, which means it might serve as a source inhibiting material of methane creation in the rumen.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.174-180
• /
• 2009

Chemical modification of titanium/titanium oxide (Ti/$TiO_2$) substrates has recently gained a great deal of attention because of the applications of Ti/$TiO_2$-based materials to biomedical areas. The reported modification methods generally involve passive coating of Ti/$TiO_2$ substrates with protein-resistant materials, and poly(ethylene glycol) (PEG) has proven advantageous for bestowing a nonbiofouling property on the surface of Ti/$TiO_2$. However, the wider applications of Ti/$TiO_2$ based materials to biomedical areas will require the introduction of biologically active moieties onto Ti/$TiO_2$, in addition to nonbiofouling property. In this work, we therefore utilized surface-initiated polymerization to coat the Ti/$TiO_2$ substrates with polymers presenting the nonbiofouling PEG moiety and subsequently conjugated biologically active compounds to the PEG-presenting, polymeric films. Specifically, a Ti/$TiO_2$ surface was chemically modified to present an initiator for atom transfer radical polymerization, and poly(ethylene glycol) methacrylate (pEGMA) was polymerized from the surface. After activation of hydroxyl groups of poly(pEGMA) (pPEGMA) with N,N'-disuccinimidyl carbonate, biotin, a model compound, was conjugated to the pPEGMA films. The reactions were confirmed by infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle goniometry, and ellipsometry. The biospecific binding of target proteins was also utilized to generate micropatterns of proteins on the Ti/$TiO_2$ surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.78-78
• /
• 2016

For the past three decades, extensive research has been performed in the surface design of new polymers for a variety of medical applications. Great progress in therapeutics and diagnostics can be attributed to these scientific advances in biomedical polymers. A variety of bioinert materials or bioactive materials using drugs, cells, and growth factors are widely utilized for the implants, devices and tissue regeneration. These materials provide an improved biocompatible materials to host, to significantly decrease or increase the host/tissue/blood response to the foreign materials. In the future, biomaterials will play a different role in modern therapeutics. New materials will be tailored to interact more on a protein and cellular level to achieve high degree of biocompatibility, biospecificity and bioacitivity. In this presentation, various biocompatible materials based on surface/bulk engineering will be demonstrated, which can be utilized as therapeutics implants and therapeutic vehicles for biologically active molecules such as cell, protein /peptide and gene.

• The Journal of the Korean dental association
• /
• v.12 no.8
• /
• pp.619-622
• /
• 1974

The purpose of this study was to investigate biological tissue reactions to various restorative dental materials. An experimental pellects was implanted into subdermal tissue in dog subjects observing 1 week, 3 weeks, and 8 weeks respectively. The obtained histo-pathological findings were as follows: 1. Experimental pellets such as gold, ticonium and amalgam alloy are considered biologically acceptable. 2. Experimental results in 1 week dog showed acute inflammatory changes. 3. Experimental results in 8 week dog showed fibrotic and chronic inflammatory changes. 4. Active irritans such as silicate cements revealed acute inflammatory changes in all observed period. 5. Biological tissue to irritants observed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1077-1083
• /
• 2005

Electro-Active Paper (EAPap) is one of attractive electro-active polymer (EAP) materials for artificial muscles due to its many advantages such as light weight, biologically degradable, low cost, large displacement output, low actuation voltage and low power consumption. However, drawbacks of EAPap actuators include low force output and humidity dependence. To enhance the performance of EAPap, conductive polymer (PPy) and SWNT/conductive polymer (PANI) are coated on EAPap PPy as conductive polymer is coated on cellulose EAPap by means of electrochemical deposition. Two different dopants are used in PPy through conducting polymer processing. SWNTS are mixed with PANI in emeraldine base along with different dopants. The compound materials are coated on cellulose EAPap using spin coating system. The performance of PPy/EAPap and SWNT/PANI/EAPap are evaluated in terms of bending displacement, blocked force, and the effects of dopants, humidity, coaling time, voltage and frequency are investigated. Comparing with EAPap actuators, SWNT/PANI/EAPap actuators show $200\%$ improvement of bending displacement and $300\%$ increment of blocked force.