• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.113-120
• /
• 2013

Miscanthus is one of the promising energy crops for producing bioethanol or bioenergy in many countries. A field of about 180 ha for miscanthus plantation was started for demonstration near Geum River in 2011. Since the size of the field is much larger than those of traditional cultivation for one single crop in this country, questions were raised if there are any environmental impacts from the energy crop plantation, particularly on water quality. In this study, water quality of runoff water from three different plots was analyzed for assessing the impacts of energy crop production. The results showed that there were no substantial differences among the plots; control, the first, and the second year growth fields. The concentrations of COD, T-N, and T-P were lower than those in runoff water from agricultural crop fields. The second year field showed a slight higher values of COD and T-N concentrations due to the biodegradation of residue of miscanthus which was not cultivated for observation. Commercial planation of miscanthus in a large scale would not result in a water quality problem when avoiding application of fertilizer as practiced in agricultural crop fields.

• Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.181-193
• /
• 2006

The hydrophilic or hydrophobic characteristics of dissolved organic matter (DOM) from different origins in lake and river waters were investigated using spectrometric and chromatographic analyses of water samples. DOM in a deep, mesotrophic lake (Lake Unmun) was fractionated using three types of ion exchange resins and classified into aquatic humic substances (AHS), hydrophobic neutrals (HoN), hydrophilic acids (HiA), hydrophilic neutrals (HiN), and bases (BaS). The DOM fractionation provided insight into the understanding of the nature of heterogeneous DOM molecules present in different water sources. The UV/DOC ratios were determined for samples from the influent river and lake waters during DOM fractionation and incubation. AHS prevailed over DOM in the lake and river waters. After biodegradation, the relative contribution of AHS in the total DOM became more significant. It indicates that the AHS fraction would increase while water stay long time in the lake.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.97-103
• /
• 2010

The biodegradable oil absorption resin was prepared by the suspension polymerization of the modified starch and 2-ethylhexyl acrylate (2-EHA). The highest oil-absorption capacity of B-PEHA prepared showed at the condition of the modified starch content of 10 g and ethyleneglycol dimethacrylate (EGDMA) of 0.133 wt%. Its maximum oil absorption capacity per g of oil absorber was chloroform 30.88 g, toluene 19.75 g, xylene 18.78 g, tetrahydofuran (THF) 15.96 g, octane 11.43 g, hexane 9.5 g diesel oil 12.80 g, and kerosene 13.79 g, respectively. The biodegradation of poly-2-ethylhexylacrylate (B-PEHA) determined by enzymatic hydrolysis showed approximately 17~20%. The results showed that the preparation of the biodegradable oil absorption resin is available using the modified starch.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.220-222
• /
• 1998

Three microbial consortia were screened for their ability to degrade phenolic resin, resole as a sole carbon source. These microbial consortia were derived from soil samples collected from a phenolic resin manufacturing plant site. Among the consortia, the test consortium, designated as MS2, displayed approximately 70% degradation of the substrate, 100 mg of resole per liter, within the fist twelve days of incubation but the degradation was inhibited. During the incubation period, pH was decreased from 7.0 to 2.7, and the resole degradation became inhibited under the conditions. UV-scans of spent culture showed that the wavelength of maximum absorption was 261 nm for resole.

• Advances in environmental research
• /
• v.1 no.3
• /
• pp.201-210
• /
• 2012

The bioavailability of sorbed organic contaminants is one of the most important factors used to determine their fate in the environment. This study was conducted to evaluate the bioavailability of slow-desorbable naphthalene in soils. An air sparging system was utilized to remove dissolved (or desorbed) naphthalene continuously and to limit the bacterial utilization of dissolved naphthalene. A biological air sparging system (air sparging system with bacteria) was developed to evaluate the bioavailability of the slow-desorption fraction in soils. Three different strains (Pseudomonas putida G7, Pseudomonas sp. CZ6 and Burkholderia sp. KM1) and two soils were used. Slow-desorbable naphthalene continuously decreased under air sparging; however, a greater decrease was observed in response to the biological air sparging system. Enhanced bioavailability was not observed in the Jangseong soil. Overall, the results of this study suggests that the removal rate of slow-desorbable contaminants may be enhanced by inoculation of degrading bacteria into an air sparging system during the remediation of contaminated soils. However, the enhanced bioavailability was found to depend more on the soil properties than the bacterial characteristics.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.263-271
• /
• 2018

The objective of this work was to analyze organic matter removal, nitrification, biomass growth and membrane fouling in a submerged flat-sheet membrane bioreactor, fed with synthetic wastewater, of similar composition to the effluents generated in a fish meal industry. After biomass acclimatization with saline conditions of 12 gNaCl/L and COD/N ratio of 15 in the bioreactor, results showed that the organic matter removal was higher than 90%, for all organic loading rates (0.8, 1, 1.33 and $2gCOD/L{\cdot}d$) and nitrogen loading rates (0.053, 0.067, 0.089 and $0.133gN/L{\cdot}d$) tested during the study. However, nitrification was only carried out with the lowest OLR ($0.8gCOD/L{\cdot}d$) and NLR ($0.053gN/L{\cdot}d$). An excessive concentration of organic matter in the wastewater appears as a limiting factor to this process' operating conditions, where nitrification values of 65% were reached, including nitrogen assimilation to produce biomass. The analysis of membrane fouling showed that the bio-cake formation at the membrane surface is the most impacting mechanism responsible of this phenomenon and it was demonstrated that organic and nitrogen loading rates variations affected membrane fouling rate.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.680-684
• /
• 2011

Seed oil of Balanites aegyptica was transesterified to produce biodiesel and its quality and biodegradability assessed. The specific gravity (SG), density and flash point of the methyl esters were found to be 0.897, 0.89 g/$cm^3$ and $163^{\circ}C$ respectively. Biodegradability of the biodiesel assessed by the standard $CO_2$ evolution method using two different inoculums revealed that the Balanites aegyptica biodiesel was readily biodegradable in both inoculums (82.58% and 86.98%), compared with the $D_2$ diesel which was partially biodegradable (27.02% and 27.33%). These suggest that Balanites aegyptiaca seed oil is a potential source of environmentally friendly biodiesel.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.172-178
• /
• 2013

PURPOSE. The purpose of this study was to assess the difference in efficacy between calcium metaphosphate (CMP)-coated implant fixtures and conventional resorbable blasted media (RBM) processed implant fixtures. MATERIALS AND METHODS. This study targeted 50 implants from 44 patients who visited Dankook University Dental Hospital. Implantations were done separately for RBM treated and CMP-coated implants, although their design was the same. Calcium metaphosphate has a quicker biodegradation process through hydrolysis compared to other phosphate calcium groups. For the first year of the implantation, the resorption volume of marginal bone analyzed via radiography and perio-test value were measured, under the check plan. Their analyses were composed of a non-inferiority trials test. A 95% level of reliability was used. RESULTS. In the comparative analysis of the resorption volume of marginal bone and the perio-test value, no statistically significant difference was found between the CMP-coated implants and RBM implants. CONCLUSION. One year after the implant placement, CMP-coated implants were found not to be inferior to the conventional RBM implants.

• Journal of Microbiology
• /
• v.42 no.2
• /
• pp.87-93
• /
• 2004

Twelve mecoprop-degrading bacteria were isolated from soil samples, and their genetic and phenotypic characteristics were investigated. Analysis of 16S rDNA sequences indicated that the isolates were related to members of the genus Sphingomonas. Ten different chromosomal DNA patterns were obtained by polymerase-chain-reaction (PCR) amplification of repetitive extragenic palindromic (REP) sequences from the 12 isolates. The isolates were found to be able to utilize the chiral herbicide meco-prop as a sole source of carbon and energy. While seven of the isolates were able to degrade both (R)-and (S)-mecoprop, four isolates exhibited enantioselective degradation of the (S)-type and one isolate could degrade only the (R)-enantiomer. All of the isolates were observed to possess plasmid DNAs. When certain plasmids were removed from isolates MPll, MP15, and MP23, those strains could no longer degrade mecoprop. This compelling result suggests that plasmid DNAs, in this case, conferred the ability to degrade the herbicide. The isolates MP13, MP15, and MP24 were identified as the same strain; however, they exhibited different plasmid profiles. This indicates that these isolates acquired dif-ferent mecoprop-degradative plasmids in different soils through natural gene transfer.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.334-341
• /
• 1989

Toluate degradative plasmid from Pseudomonas cepacia SUB37 was determined to be molecular weight as $79.3\times 10^6$