• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.282-293
• /
• 2018

This paper attempts to address the motion parameter skip problem associated with three-dimensional trajectory tracking of an underactuated Autonomous Underwater Vehicle (AUV) using backstepping-based control, due to the unsmoothness of tracking trajectory. Through kinematics concepts, a three-dimensional dynamic velocity regulation controller is derived. This controller makes use of the surge and angular velocity errors with bio-inspired models and backstepping techniques. It overcomes the frequently occurring problem of parameter skip at inflection point existing in backstepping tracking control method and increases system robustness. Moreover, the proposed method can effectively avoid the singularity problem in backstepping control of virtual velocity error. The control system is proved to be uniformly ultimately bounded using Lyapunov stability theory. Simulation results illustrate the effectiveness and efficiency of the developed controller, which can realize accurate three-dimensional trajectory tracking for an underactuated AUV with constant external disturbances.

• Advances in robotics research
• /
• v.2 no.1
• /
• pp.1-11
• /
• 2018

To monitor the environment and determine the source of a pollutant gradient using a multiple robot swarm, we propose a hybrid algorithm that combines two bio-inspired algorithms mimicking chemotaxis and pheromones of bacteria. The algorithm is implemented in virtual robot agents in a simulator to evaluate their feasibility and efficiency in gradient maps with different sizes. Simulation results show that the chemotaxis controller guided robot agents to the locations with higher pollutant concentrations, while the pheromone marked in a virtual field increased the efficiency of the search by reducing the visiting redundancy. The number of steps required to reach the target point did not increase proportionally as the map size increased, but were less than those in the linear whole-map search method. Furthermore, the robot agents could function with simple sensor composition, minimum information about the map, and low calculation capacity.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.264-269
• /
• 2019

This paper presents mechanical design and control of a bio-inspired legged robot. To achieve a fast legged running mechanism, a novel linkage leg structure is designed based on hind legs of domestic cats. The skeletomuscular system and parallel leg movement of a cat are analyzed and applied to determine the link parameters. The hierarchical control architecture is designed according to the biological data to generate and modulate desired gaits. The effectiveness of the leg mechanism design and control is verified experimentally. The legged robot runs at a speed of 46 km/h, which is comparatively higher speed than other existing legged robots.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.416-424
• /
• 2007

The Bio-Inspired system is a computing model that emulates the objects in ecosystem which are evolving themselves and cooperate each other to perform some tasks. Since it could be used to solved the complex problems that have been very difficult to resolve with previous algorithms, there have been a lot of researches to develop an application based on the Bio-Inspired system. However, since this computing model requires the process of evolving and cooperating with a lot of objects and this process takes a lot of times, it has been very hard to develop an application based on this computing model. This paper presents a parallel simulator for a Bio-Inspired system that is designed and implemented with OMNeT++ on PC clusters, and proves its usefulness by showing its simulation performance for a couple of applications. In the proposed parallel simulator, the functions required in the ERS platform for evolving and cooperating between objects (called Ecogent) are mapped onto the functions of OMNeT++, and they are simulated on PC clusters simultaneously to reduce the total simulation time. The simulation results could be monitored with a GUI In realtime, and they are also recorded into DBMS for systematic analyses afterward. This paper shows the usefulness of the proposed system by analyzing its performances for simulating various applications based on Bio-Inspired system on PC clusters with 4 PCs.

• Journal of Internet Computing and Services
• /
• v.15 no.5
• /
• pp.1-7
• /
• 2014

WireWireless sensor networks(WSNs) are generally comprised of densely deployed sensor nodes, which causes highly redundant sensor data transmission and energy waste. Many studies have focused on energy saving in WSNs. However, delay problem also should be taken into consideration for mission-critical applications. In this paper, we propose a BISA (Bio-Inspired Scheduling Algorithm) to reduce the energy consumption and delay for WSNs inspired by biological systems. BISA investigates energy-efficient routing path and minimizes the energy consumption and delay using multi-channel for data transmission. Through simulations, we observe that the BISA archives energy efficiency and delay guarantees.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1317-1341
• /
• 2021

Nowadays, the Internet of Things (IoT) is adopted to enable effective and smooth communication among different networks. In some specific application, the Wireless Sensor Networks (WSN) are used in IoT to gather peculiar data without the interaction of human. The WSNs are self-organizing in nature, so it mostly prefer multi-hop data forwarding. Thus to achieve better communication, a cross-layer routing strategy is preferred. In the cross-layer routing strategy, the routing processed through three layers such as transport, data link, and physical layer. Even though effective communication achieved via a cross-layer routing strategy, energy is another constraint in WSN assisted IoT. Cluster-based communication is one of the most used strategies for effectively preserving energy in WSN routing. This paper proposes a Bio-inspired cross-layer routing (BiHCLR) protocol to achieve effective and energy preserving routing in WSN assisted IoT. Initially, the deployed sensor nodes are arranged in the form of a grid as per the grid-based routing strategy. Then to enable energy preservation in BiHCLR, the fuzzy logic approach is executed to select the Cluster Head (CH) for every cell of the grid. Then a hybrid bio-inspired algorithm is used to select the routing path. The hybrid algorithm combines moth search and Salp Swarm optimization techniques. The performance of the proposed BiHCLR is evaluated based on the Quality of Service (QoS) analysis in terms of Packet loss, error bit rate, transmission delay, lifetime of network, buffer occupancy and throughput. Then these performances are validated based on comparison with conventional routing strategies like Fuzzy-rule-based Energy Efficient Clustering and Immune-Inspired Routing (FEEC-IIR), Neuro-Fuzzy- Emperor Penguin Optimization (NF-EPO), Fuzzy Reinforcement Learning-based Data Gathering (FRLDG) and Hierarchical Energy Efficient Data gathering (HEED). Ultimately the performance of the proposed BiHCLR outperforms all other conventional techniques.

• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.506-516
• /
• 2015

Wireless sensor networks (WSNs) are generally comprised of densely deployed sensor nodes, which results in highly redundant sensor data transmissions and energy waste. Since the sensor nodes depend on batteries for energy, previous studies have focused on designing energy-efficient medium access control (MAC) protocols to extend the network lifetime. However, the energy-efficient protocols induce an extra end-to-end delay, and therefore recent increase in focus on WSNs has led to timely and reliable communication protocols for mission-critical applications. In this paper, we propose an energy efficient and delay guaranteeing node scheduling scheme inspired by biological systems, which have gained considerable attention as a computing and problem solving technique.With the identification of analogies between cellular signaling systems and WSN systems, we formulate a new mathematical model that considers the networking challenges of WSNs. The proposed bio-inspired algorithm determines the state of the sensor node, as required by each application and as determined by the local environmental conditions and the states of the adjacent nodes. A control analysis shows that the proposed bio-inspired scheme guarantees the system stability by controlling the parameters of each node. Simulation results also indicate that the proposed scheme provides significant energy savings, as well as reliable delay guarantees by controlling the states of the sensor nodes.

• The Magazine of the IEIE
• /
• v.24 no.10
• /
• pp.63-72
• /
• 1997

Application of MEMS to biologic system mainly categorized into bio-electronics and micro-medical systems, Bio-electronics concerns on the biocompatible electronic device, in-vivo sensors, the sensors based on biological materials, biological materials for electronics and optics, the concepts and materials Inspired by biology and useful for electronics, the algorithm inspired by biology, artificial sense, and the biologic-inorganic hybrids. Micro-medical systems are utilited into the drug delivery systems, micro patient monitoring systems, micro prosthesis and artificial organs, cardiology related prothesis, analysis systems, and the minimal invasive surgery tools based on the m icrom achining technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.3
• /
• pp.143-150
• /
• 2014

In this paper, we propose an energy efficient and delay guaranteed node scheduling scheme inspired by biological systems, which have gained considerable attention as a computing and problem solving technique. With the identification of analogies between cellular signaling systems and WSN systems, we formulate a new mathematical model that considers the networking challenges of WSNs. The proposed bio-inspired algorithm determines the state of the sensor node, as required by each application and as determined by the local environmental conditions and the states of the adjacent nodes. A control analysis shows that the proposed bio-inspired scheme guarantees the system stability by controlling the parameters of each node. Simulation results also indicate that the proposed scheme provides significant energy savings, as well as reliable delay guarantees by controlling the states of the sensor nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2205-2217
• /
• 2015

Bio-inspired routing protocol uses a principle of swarm intelligence, which finds the optimal path to the destination in a distributed and autonomous way in dynamic environments, so that it can maximize routing performances, reduce control overhead, and recover a path failure quickly according to the change of network topology. In this paper, we propose a bio-inspired routing protocol for mobile ad hoc networks. The proposed scheme uses a function of overhearing via wireless media in order to obtain the routing information without additional overhead. Through overhearing, the pheromone is diffused around the shortest path between the source and destination. Based on this diffused pheromone, a probabilistic path exploration is executed and the useful alternative routes between the source and destination are collected. Therefore, the proposed routing protocol can ensure the up-to-date routing information while reducing the control overhead. The simulation results show that the proposed scheme outperforms the typical AODV and AntHocNet protocols in terms of routing performances and significantly decreases the routing overhead against the AntHocNet.