• KSBB Journal
• /
• v.26 no.6
• /
• pp.483-490
• /
• 2011

Bioactive peptides (BAP) showed excellent cosmetic activity than bio-materials such as caffeic acid (CA), gallic acid (GA), and nicotinic acid (NA). Caffeoyl tripeptide-1 (CT-1) is a BAP that is stabilized with Gly-His-Lys (GHK) tripeptide and CA by using Fmoc solid phase peptide synthesis. Digalloyl tetrapeptide-19 (DT-19) is stabilized by combining Lys-Glu-Cys-Gly with GA and nicotinoyl tripeptide-1 (NT-1) is synthesized by GHK and NA. According to experiments, CT-1 has an excellent anti-oxidant function even with a very small amount of 10 ppm CT-1. DT-19's tyrosinase inhibition activity has the better effect of about 28.57% in 0.01% and 33.33% in 0.005% of concentration and about 7.89% in 0.001% concentration than vitamin-C. In addition, NT-1 is safer than the NA. Almost BAPs like pal-KTTKS, acetyl hexapeptide, and copper tripeptide-1 have the anti-wrinkle effect while DT-19 and NT-1 are applicable for potential BAPs focused on the whitening effect. The three kinds of BAPs like CT-1, DT-19, and NT-1 consisting of amino acids are safe to the skin, and have more excellent stability than bio-materials which are found to be unstable and cause skin irritation. Due to the high biological activity of BAP in the field of skin care, its utilization will increase constantly.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.301-307
• /
• 2011

Purpose: If the tooth structure is damaged, then it is impossible to regenerate the tooth. The materials used to restore the tooth structure are not related to the composition of the tooth. The materials used to restore the structure can't replace the natural tooth because they just fill the defective structure. Calcium phosphate cement remineralizes the dentin and almost replaces the natural tooth, but there are some disadvantages. We conducted basic tests with Biomimetic CPC (Bio-CPC) to make sure of the possibility of the biomaterial to remineralize the defective tooth structure. Methods: In this study, the bioactivity and biocompatibility of Bio-CPC were evaluated for its potential value as the bio-material for regeneration of damaged tooth structure by conducting a cell toxicity assay (WST-1 assay), a cytokinesis-block micronucleus assay, a chromosomal aberration test, total RNA extraction and RT-PCR on MDPC-23 mouse odontoblast-like cells. Results: The in vitro cytotoxicity test showed that the Bio-CPC was fairly cytocompatible for the MDPC-23 mouse odontoblast-like cells. Conclusion: Bio-CPC has a possibility to be a new biomaterial and further study of Bio-CPC is needed.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.05a
• /
• pp.87-87
• /
• 2014

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.27-35
• /
• 2013

Cotton linter pre-treatment methods using electron beam and sulfuric acid were investigated to prepare high quality regenerated fibers for fabrics. So far, NaOH was used to reduce the degree of polymerization (DP) of the cotton linter for ease of dissolving by cellulose solvent. Two pre-treatment methods were developed to reduce the consumption of the chemicals (NaOH) and to control the DP of cellulose more precisely. Changes in ${\alpha}$-cellulose contents and brightness by the pre-treatments were also important concerns. Both electron beam irradiation and sulfuric acid were shown to be effective on controlling the DP of cellulose and to reduce the chemical consumption, but reduced ${\alpha}$-cellulose contents as well in this study. Sulfuric acid pre-treatment, which needed additional washing process after the pre-treatment when comparing to the electron beam irradiation method, gave the highest brightness and the highest reduction of ${\alpha}$-cellulose content.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.417-428
• /
• 2016

In this review, an attempt is made to calculate one-dimensional (1-D) electron density profiles from experimentally determined (00l) XRD intensities and possible structural models as well in an effort to understand the collective intracrystalline structures of intercalant molecules of two-dimensional (2-D) nanohybrids with heterostructures. 2-D ceramics, including layered metal oxides and clays, have received much attention due to their potential applicability as catalysts, electrodes, stabilizing agents, and drug delivery systems. 2-D nanohybrids based on such layered ceramics with various heterostructures have been realized through intercalation reactions. In general, the physico-chemical properties of such 2-D nanohybrids are strongly correlated with their heterostructures, but it is not easy to solve the crystal structures due to their low crystallinity and high anisotropic nature. However, the powder X-ray diffraction (XRD) analysis method is thought to be the most powerful means of understanding the interlayer structures of intercalant molecules. If a proper number of well-developed (00l) XRD peaks are available for such 2-D nanohybrids, the 1-D electron density along the crystallographic c-axis can be calculated via a Fourier transform analysis to obtain structural information about the orientations and arrangements of guest species in the interlayer space.

• Molecules and Cells
• /
• v.25 no.1
• /
• pp.20-29
• /
• 2008

Cytoplasmic male sterility (CMS), one of the most important traits in crop breeding, has been used for commercial seed production by $F_1$ hybrid cultivars of pepper (Capsicum annuum L.). To develop reliable molecular markers for allelic selection of the Restorer-of-fertility (Rf) gene, which is known to be a major determinant of pollen fertility restoration in peppers, a sequence of approximately 10 kb flanking an RAPD fragment closely linked to the Rf locus was obtained by genome walking. A homology search revealed that this sequence contained an LTR retrotransposon and a non-LTR LINE-like retrotransposon. Sequencing of this Rf-linked region to search for polymorphisms between a dominant and recessive allele revealed 98% nucleotide sequence identity between them. A third polymorphic haplotype of the Rf-linked sequence, which has 94-96% nucleotide sequence identity with the two previously isolated haplotypes, was identified among a large number of breeding lines. Utilizing polymorphic sequences in the haplotypes, PCR markers were developed for selection of particular haplotypes and used to examine the distribution of the haplotypes in diverse breeding lines, cultivars, and C. annuum germplasms. Surprisingly, the third haplotype was the predominant type in C. annuum germplasms, while its frequency in $F_1$ hybrid cultivars was relatively low. Meanwhile, analysis of breeding lines whose Rf allele genotypes and male-sterility phenotypes were already known revealed that the third haplotype was mainly present in exotic breeding lines that cause unstable male-sterility when combined with sterile cytoplasms.

• The Journal of Korean Society of Virology
• /
• v.29 no.3
• /
• pp.145-153
• /
• 1999

We have now constructed a novel recombinant baculovirus Autographa californica nuclear polyhedrosis virus (AcNPV) producing polyhedra with Bacillus thuringiensis (Bt) CryIAc crystal protein. The recombinant polyhedra produced by the recombinant baculovirus, Btrus, in insect cells was characterized. The recombinant baculovirus has two independent transcription units in opposite orientations with two promoters, p10 or polyhedrin gene promoter each initiating transcription of either native polyhedrin or fusion protein with polyhedrin and Bt Cry1Ac crystal protein. Surprisingly, this recombinant baculovirus stably produced recombinant polyhedra which were nearly similar to those of wild-type AcNPV. The immunogold staining experiment showed that the recombinant polyhedra were assembled with polyhedrin and Bt Cry1Ac crystal protein, and contained virus particles. Insecticidal toxicity of recombinant polyhedra of Btrus to the fall webworm, Hyphantria cunea, was strikingly improved in comparison with the wild-type AcNPV.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.345-351
• /
• 2011

Two feeding trials were conducted to investigate the optimum feeding rates in juvenile olive founder Paralichthys olivaceus fed practical expanded pellet(EP) containing 58.1% crude protein, 10.7% crude lipid, and 10.8% ash at low and high water temperatures. In the first experiment, triplicate groups of 15 fish with average weight of 7.7 g were fed at one of seven feeding rates(0, 1, 1.5, 2, 2.25, or 2.5% of body weight/day or to satiation) for 4 weeks at low water temperature. In the second experiment, quadruplicate groups of 20 fish with average weight of 5.5 g were fed at one of eight feeding rates(0, 3, 3.5, 4, 4.25, 4.5, or 4.75% of body weight/day or to satiation) for 4 weeks at high water temperature. Based on growth performance, we estimated that the optimum feeding rates for juvenile olive flounder were 1.97-2.51% and 4.82-6.36% of body weight/day at low and high water temperatures, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.273-278
• /
• 2002

Two-step fed-batch fermentations were carried out to overproduce Bacillus licheniformis maltogenic amylase (BLMA) in recombinant Escherichia coli. The first step was to increase the cell mass by controlling the feeding of a glucose solution, while the second step was designed to improve the amylase expression efficiency by supplementing organic nitrogen sources. The linear gradient feeding method was successfully adopted to maintain the glucose concentration below 0.2 g/l during the fed-batch mode, as effectively minimizing acetic acid formation. When the dissolved oxygen (DO) level became limiting, an accumulation of acetic acid and drastic decrease in specific BLMA productivity were observed. Glucose and organic nitrogen sources consisting of yeast extract and casein hydrolysate were simultaneously supplied in the pH-stat mode to further increase the specific BLMA expression efficiency. An organic nitrogen source consisting of 200 g/1 yeast extract and 100 g/1 casein hydrolysate was found to be the best among the various combinations tested. The feeding of an organic nitrogen source in the second-step fed-batch period was highly beneficial in enhancing the BLMA production. The optimized two-step fed-batch culture resulted in 78 g/l maximum dry cell mass and 443 U/ml maximum BLMA activity, corresponding to 1.5-fold increase in the dry cell mass and 3.7-fold enhancement in BLMA production, compared with the simple fed-batch fermentation.

• Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.93-104
• /
• 2011

Two hepcidin paralogs (ojhamp1 and ojhamp2) were isolated and characterized from a euryhaline Javanese ricefish (Oryzias javanicus: Beloniformes). The ojhamp1 cDNA encoded 90 or 91 amino acids (aa) of a typical HAMP1 preproprotein. This preproprotein is believed to cleave and yield the 66 or 67 aa-proprotein, followed by the 26 aa-mature peptide, composed of 8 conserved cysteine residues and the QSHL amino terminal motif. The ojhamp2 cDNA encoded 89 aa of HAMP2 preproprotein, cleaved to yield a 65 aa proprotein, and subsequently the 25 aa-mature peptide. The mature OJHAMP1 possessed a cationic isoelectric point (pI), whereas OJHAMP2 had an anionic charge. At the genomic level, both ojhamp1 and ojhamp2 share a conserved tripartite structure (three exons interrupted by two introns) with other vertebrate hepcidin genes. However, the ojhamp1 was shown to exist as two distinct mRNA species, encoding 90 or 91 aa, due to alternative splicing at the junction site between intron I and exon II. Both ojhamp1 and ojhamp2 transcripts were detected in a wide range of tissue types with varying levels of basal expression, although the highest expression was observed in the liver for both isoforms. Transcriptional response to bacterial challenge using Edwardsiella tarda showed that ojhamp1 was moderately upregulated in the liver but remained unchanged in the kidney. However, the ojhamp2 was significantly suppressed in both the kidney and liver, suggesting a potential diversification between the two paralogs.