• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.510-514
• /
• 2002

A simple method for a time delay measurement of a chirped fiber grating by using bidirectional modulation of a Mach-Zehnder modulator has been proposed. The bidirectionally modulated light with time difference makes an interference fringe in the RF domain. The time delay of a chirped fiber grating can be obtained by measuring the period of the RF interference fringe for different wavelengths. We have measured the time delay of a chirped fiber grating with a chirped length of 5 cm and a bandwidth of 3.16 nm. The average slope of the time delay has been measured to be 183 ps/nm and its uncertainty has been less than $\pm$1.7%.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.287-291
• /
• 2022

In general, as the amplitude and phase information of the physical layer channel impulse response change rapidly in time and frequency according to the high-speed movement of the vehicles in V2X communication systems, it is difficult to accurately estimate these channels at the receiving end. In order to effectively overcome this problem, midamble-based channel estimation methods in which mid-ambles are periodically inserted into a packet have been recently considered. However, as the number of midambles increases, we suffer from the spectral efficiency loss. To relieve such a loss, in this paper, we propose a new bidirectional averaging channel estimation method that combines the existing data pilot-based channel estimation methods and the mid-ambles. Finally, through the simulation results, we demonstrate that the proposed method outperforms the existing mid-amble method in terms of packet error rate with fewer number of mid-ambles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.95-101
• /
• 2005

In this paper, some performance characteristics of multimedia traffic for mobile ad-hoc networks is studied with simulations. Synthetic streaming video is considered as the multimedia traffic for MPEG-coded video in the simulation. The synthetic video stream is generated with a video stream generation algorithm. The algorithm generate VBR traffics for MPEG video streams with special predefined GOP(group of pictures) patterns that is consisted of a sequence of I(intra-coded), P(predicted-coded) and B(bidirectional-coded) frames. The synthetic VBR streams is transmitted through UDP protocol with on-demand mobile ad-hoc network routing protocols like as AODV and DSR. And performances for video streams through mobile ad-hoc networks is evaluated, the throughputs is compared between data and video traffics.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.5
• /
• pp.345-351
• /
• 2018

A distributed control method is proposed to improve the power sharing performance of bidirectional distributed generators and the voltage regulation performance of a DC bus in a DC microgrid. Voltage sensitivity analysis based on power flow analysis is conducted to analyze the structural characteristics of a DC microgrid. A distributed control method using a voltage sensitivity matrix is proposed on the basis of this analysis. The proposed method uses information received through the communication system and performs the droop gain variation method and voltage shift method without additional PI controllers. This approach achieves improved power sharing and voltage regulation performance without output transient states. The proposed method is implemented through a laboratory-scaled experimental system consisting of two bidirectional distributed generators, namely, a load and a non-dispatchable distributed generator in a four-bus ring-type model. The experimental results show improved power sharing accuracy and voltage regulation performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.264-270
• /
• 2006

In this paper we verified that the window based TCP performance of throughput can be improved by the traffic connection efficiency. and have studied the performance of traffic congestion control that is controlling transmission rate. In wireless network, the bidirectional node is run by estimating the usage rate of link of error control idle and the throughput is shown by transmitting segments. The throughput rate shows almost no delay due to the bidirectional traffic connection efficiency up to the allowable point as increasing the transport rate by the critical value, depending on the size of end-to-end node queue of the increase of transport rate. This paper reports the performance improvement as the number of feedback connection traffic congestion control increases because of the increase of the number of asynchronous transport TCP connections.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.668-685
• /
• 2019

Provision of higher throughput without sacrificing consistency guarantees in replication systems is a critical problem. In this paper, we propose a novel approach called Bidirectional Chain Replication (BCR) to improve throughput in traditional Chain Replication (CR) through better utilization of computing and communication resources of the chain. Unlike CR where the whole replicated data store is treated as a single unit, in BCR the replicated shared data at each server in the chain is split into two disjoint Logical Partitions ($LP_1$, $LP_2$). This forms two chains running concurrently on the same hardware in two opposite directions; the first chain ($CR_1$) exclusively manipulates data objects in $LP_1$, while the second chain ($CR_2$) exclusively manipulates data objects in $LP_2$, therefore, conflict is avoided and concurrency is guaranteed. The simultaneous employment of these two chains results in better utilization of hardware in the sense that the two chains can evenly share the workload, hence, throughput can be improved without sacrificing consistency. Experimental results showed an improvement of approximately 85% in throughput of BCR over CR.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.347-353
• /
• 2012

In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.386-386
• /
• 2012

We studied a bilateral switching device for spin transfer torque (STT-MRAM) based on 3D device simulation. Metal/P/N+or Metal/N/P+ junction device with $30{\times}30nm2$ area which is composed of one side schottky junction at Metal/P/N+ and Metal/N/P+ provides sufficient bidirectional current flow to write data by a drain induced barrier lowering (DIBL). In this work, Junction device confirmed that write current is more than 30 uA at 2 V, It is also has high on-off ratio over 105 under read operation. Junction device has good process feasibility because metal material of junction device could have been replaced by bottom layer of MTJ. Therefore, additional process to fabricate two outer terminals is not need. so, it provides simple fabrication procedures. it is expected that Metal/P/N+ or Metal/N/P+ structure with one side schottky junction will be a promising switch device for beyond 30 nm STT-MRAM.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.551-557
• /
• 2015

The technology using ARM TrustZone draws attention as a new embedded virtualization approach. The ARM TrustZone defines two virtual execution environment, the secure world and the normal world. In such an environment, the inter-world communication is important to extend function of software. However, the current monitor software does not sufficiently support the inter-world communication. This paper presents a new inter guestOS communication scheme, for each world, for the ARM TrustZone virtualization. The proposed communication scheme supports bidirectional inter-world communication for single core and multicore environment. In this paper, It is implemented on a NVIDIA Tegra3 processor based on the ARM Cortex-A9 MPCore and it showed a bandwidth of 30MB/s.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.253-259
• /
• 2015

In this paper, we propose a transformer of alternating voltage source utilizing a semiconductor, operating in bidirectional fashion. Transformer is a device transferring energy by inductive coupling between its winding circuits. Conventional transformer is a device, composed of a primary coil and a secondary coil, transforming an alternating voltage. The system we propose is designed with a single circuit transforming the level of voltage signal in two ways; from the source to the load, and vice versa. For semiconductor switches, the NPN transistor is connected to the alternating voltage source terminal, and emitter terminal is connected to the inductor in the system as an energy storage element. The control signal is applied to the base terminal of the semiconductors. We have shown that the system we propose, by adopting only one circuit, drives an alternating voltage transformer that changes the amplitudes of voltage signal in reciprocal way.