• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Journal of Chest Surgery
• /
• v.38 no.4 s.249
• /
• pp.284-290
• /
• 2005

We evaluated the early and mid-term results for repair of Ebstein's anomaly. Material and Method: Between January 1989 and June 2004, 29 patients underwent repair of Ebstein's anomaly. The median age was 11.4 years (4 days-50 years). Tricuspid insufficiency equal to or greater than grade 3 was present in 21 $(72.4\%)$ patients. Surgical techniques included tricuspid valve repair with vertical plication of the atrialized ventricle (n=14), Carpentier's technique (n=7), tricuspid valve replacement (n=4), systemic-to-pulmonary arterial shunt (n=2), tricuspid valve repair (n=1), and Fontan operation (n=1). Bi-directional cavopulmonary shunt (BCPS) was required in 5 patients. Among the 2 neonates, one patient underwent successful biventricular repair, and the other patient underwent systemic-to-pulmonary arterial shunt. Follow-up was possible in 21 patients $(75\%)$, and the average follow-up was 37.6 months (3 months-11.3 years). Result: There were $1(3.4\%)$ early and 1 late deaths. Reoperation was required in 4 patients. Two patients underwent tricuspid valve re-replacement, and the other 2 tricuspid valve repair. At recent follow-up, only 2 patients showed tricuspid insufficiency equal to or greater than grade 3, and most patients showed clinical improvement. Excluding the patients who underwent tricuspid valve replacement, the actuarial rate of freedom from reoperation at 1 and 5 years were $94.7\%\;and\;79.0\%$, respectively. Conclusion: Tricuspid valve repair was possible in most patients with good mid-term outcome. Most patients showed clinical and hemodynamic improvement. Indications for the BCPS should be clarified.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.193-200
• /
• 2009

Background: The long-term administration of oral anticoagulant to the patients with a mechanical heart valve prosthesis is mandatory. However, the appropriate intensity of oral anticoagulant therapy to prevent thromboembolic or hemorrhagic complications is still controversial. We tried to apply low intensity anticoagulant therapy for which the International Normalized Ratios ranged between 1.5 and 2.5, and we analyzed the anticoagulation-related long term outcomes. Material and Method: From January 1992 to December 2002, 144 patients who underwent a single cardiac valve replacement were included in the study, and their ages ranged from 15 to 72 years (mean age: $47.4{\pm}15.1$): there were 49 aortic valve replacements (AVR) and 95 mitral valve replacements (AVR). The patients were followed up monthly or bi-monthly at the outpatient clinic with clinical examinations and measuring the prothrombin time to adjust the International Normalized Ratios (INRs) within the low-intensity target range between 1.5 and 2.5. Result: The follow-up period was 835.3 patient-years (mean: $5.9{\pm}3.5$) and the INRs of 7,706 measurements were available for evaluation. The mean INRs of the aortic and the mitral valve replacement groups were significantly different (p<0.01). All the patients' INRs were within the target range in 61.9% of the measurements. The mean INRs $(2.16{\pm}0.23)$ of the patients with atrial fibrillation, which was found in 30.3% of the patients, were definitely higher than those $(2.03{\pm}0.27)$ measured in the patients with regular rhythm (p<0.01). Thromboembolic episodes occurred in 9 patients with an incidence of 1.08%/patient-year. Major bleeding occurred in 2 patients (MVR) with an incidence of 0.24%/patient-year. The patients who displayed better compliance showed a lower incidence of complications (p=0.000). Conclusion: The anticoagulation therapy with a low-intensity target range after MVR or AVR seems to be effective and feasible, and increasing the patients’ compliance should be done for achieving more effective anticoagulation therapy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.4
• /
• pp.217-224
• /
• 1988

Changes in lipid components of Gul-bi, salted-dried yellow corvenia, during processing and storage were studied. Raw fishes contained $6.7\%$ total lipid (TL) which consisted of $83.3\%$ neutral lipid (NL), $6.5\%$ glycolipid (GL) and $10.2\%$ phospholipid (PL), and salted-dried sample at 30 days storage contained $11.1\%$ TL which consisted of $86.1\% NL, $7.1\%$ GL and $6.8\%$ PL. The NL was mainly consisted of trigly ceride (TG), free sterol (FS), free fatty acid (FFA), and the main lipids in PL were phosphatidyl choline (PC), phosphatidly ethanolamine (PE) and sphingomyelin (SPM). The contents of TG, PC, PE decreased, while that of FFA, SPM increased during processing and storage. Total fatty acid contents of raw fish, salted sample, salted-dried sample (product) and product at 30/days of storage were 847.9, 764.0, 633.5 and 588.mg/g-lipid, respectively, taking $C_{23:0}$ as the internal standard material. Most fatty acid con tents of TL revealed a tendency to decrease during processing and storage, highly unsaturated fatty acid such as $C_{22:6},\;C_{20:5}$, decreased largely. The major fatty acids in TL, NL, GL and PL were generally $C_{16:0},\;C_{16:1},\;C_{18:1},\;C_{20:5},\;C_{22:6}. Percentage of $C_{16:1},\;C_{18:1}$ in NL and GL and GL are higher than those in PL, while $C_{22:6},\;C_{20:5},\;C_{20:4}$. Peroxide value in salted-dried sample is 121.6 meq/kg and decreased rapidly with storage period, carbonyl value and brown pigment formation showed tendency of increase during processing and storage.

• Journal of Life Science
• /
• v.24 no.6
• /
• pp.642-647
• /
• 2014

Although it is not a pathological symptom, Dentinal Hypersensitivity (DH) describes pain felt by patients whose tooth roots are exposed outside of the gums and are therefore sensitive to external stimuli. DH is caused by tooth brushing or gum diseases and treatment to reduce the sensitivity can include use of materials having stimulation activity for DH or a resin material applied periodontally. This study examined the hypersensitivity treatment effects of a four-week treatment with a toothpaste containing hydroxyapatite and tricalcium phosphate (Hap-TCP toothpaste). The Hap-TCP toothpaste was made by mixing a commercially available fluorine-containing toothpaste with 10% (W/W) hydroxyapatite and 19% (W/W) tricalcium phosphate (both 99% purity based on XRD analysis). The tooth hypersensitivity treatment effect was surveyed by scoring VRS values, and showed no significant initial difference compared with the control. However, after 1 week of use, the pain reduction value was 8% in the treatment group compared to the control group. This value increased to 30% and 60% after 2 and 4 weeks, respectively. Hypersensitivity to cold stimulation, which was used as a VAS value, showed no initial significant differences compared with the control, but was significantly decreased after 1, 2, and 4 weeks in the experimental group, with more than a 3-fold difference after 4 weeks. These findings confirmed that remineralization can alleviate DH as hydroxyapatite fills dentinal tubules and calcium, phosphorus, and tricalcium phosphate ion equilibrium is established.