• 한국해양학회지:바다
• /
• 제29권1호
• /
• pp.56-76
• /
• 2024

동해에서 수행된 국내 최장기 수중글라이더 운용 및 연속 단면 관측 결과를 보고한다. 본 연구팀은 수중글라이더를 활용하여 2020년 9월 18일부터 12월 21일까지 총 95일 동안 국립수산과학원(NIFS) 정선 관측 106 라인에 거의 일치하는 37.9 °N 위도선을 따라 동경 129.1 °E ~ 131.5 °E 사이를 6회 왕복하는 국내 최초의 연속 물성 단면 관측을 성공리에 수행하였다. 본 수중글라이더는 2020년 9월 18일 129.1 °E 위치에서 투하되어 9월 19일부터 88일간의 비행 관측을 수행하였고, 2020년 12월 15일부터 6일간 129.2 °E 위치에서 위치 제어 유지(Virtual Mooring)후 회수되며 전체 운용을 마무리하였다. 표층부터 800 dbar 수심까지 톱니형태의 궤적을 그리면서 총 수평거리 2550 km를 비행하는 동안 글라이더의 경로 이탈은 RMS 거리 262 m를 벗어나지 않을 정도의 매우 안정적인 경로 추종 모드를 보여줬다. 비행 관측을 통해 획득한 총 12개의 고해상도 물성 횡단면 자료로부터 수온과 염분의 연속적인 변동이 보이는 아중규모 특성을 확인하였고, 국립수산과학원(NIFS)의 격월 선박 관측 자료와 비교함으로써 시공간 해상도 차이에 따른 뚜렷한 특성을 발견하였다. 첫째는 공간 해상도 차이에 따른 결과로 표층 전선역의 세기 및 이동, 수온약층 강화현상 등 아중규모 현상들이 글라이더 횡단면 자료에서만 뚜렷하게 관찰되었다. 이러한 아중규모 구조는 현행 선박 관측 자료의 정점 간격(25 km) 보다 작다는 특징이 있었는데, 동해 내 아중규모 구조의 이해를 위해서는 고해상도 관측이 필요함을 의미한다. 둘째는 시간 해상도 차이에 따른 결과로 글라이더 자료에서 추출한 평균 7일 간격의 수온과 염분 시계열이 대략 6주 주기를 갖는 월중변동(Intramonthly variation) 특성을 보인다는 것과 대략 1주 동안 급격한 관측치의 변동이 나타난다는 것을 확인하였다. 이는 격월 정선 관측 자료에는 확인되지 않는 특징이다. 따라서, 정선 관측해역의 물성 변동을 이해하기 위해서는 선박 관측과 비교하여 상대적으로 비용이 저렴하고 효율적인 글라이더 관측을 통한 보완이 필요하다고 여겨진다. 마지막으로 두 플랫폼 간 관측치의 편차를 확인하였는데, 이러한 편차의 요인을 공간 규모에 기초한 정점의 정의 및 시간 규모에 따른 변동성, 그리고 각 플랫폼의 CTD 측정 장비의 교정 관점에서 논하였다.

• 대한영상의학회지
• /
• 제84권2호
• /
• pp.398-408
• /
• 2023

목적 유방의 양성 선근상피종의 영상 소견에 대해 기술하고자 한다. 대상과 방법 최근 20년 동안, 본원에서 조직 확진된 120명의 환자의 유방에서의 선근상피종을 대상으로 하였다. 43명의 환자는 유방암으로 유방 전 절제술을 시행하면서 우연히 발견되어 제외하였으며, 28명의 환자는 절제생검을 하지 않고 경피적 생검만 시행하여 제외하였고, 8명의 환자는 생검에서 양성 선근상피종으로 확인되었으나 완전 절제술 후 다른 질환으로 확진되어 제외하였다. 결과적으로, 완전 절제술 후 조직 확진된 41명 환자의 양성 선근상피종에 대해 후향적으로 임상 정보와 영상 소견을 분석하였다. 결과 유방촬영술에서 병변은 원형 또는 타원형의 모양(56%), 경계가 좋지 않음(62%), 고밀도음영(53%), 종괴형(89%)을 보였으며, 미세석회회가 없었다(95%). 유방초음파에서 병변은 의심스러운 종괴(98%), 경계가 좋지 않음(66%), 저에코(43%), 그리고 종양내 혈관성(63%)을 보였다. 유방자기공명영상에서 의심스러운 종괴(100%), 불분명한 경계(61%) 그리고 조영증강 시 지연기 소실(84%)을 보였다. 양성 선근상피종의 41개 병변 중 16개 병변은 처음 중심바늘생검에서 다른 질환으로 오진되었으며 2명의 환자는 유방암으로 오진되었다. 결론 유방의 양성 선근상피종은 유방촬영술, 유방초음파, 유방자기공명영상에서 악성 종양과 유사한 의심스러운 특징을 보인다. 양성 선근상피종을 다른 질환과 감별하는 것은 중심바늘생검만으로는 어려우며, 올바른 진단을 위해서는 완전절제술이 필요하다.

• 한국식품위생안전성학회지
• /
• 제39권3호
• /
• pp.250-259
• /
• 2024

발효주의 잔류물질 실태조사를 위해 울산지역에서 유통되는 발효주 150건을 수거하여 잔류농약 400종과 중금속 납, 카드뮴, 수은을 분석하였다. 잔류농약 분석 결과, 102건(68%)의 검출을 나타냈으며 검출된 농약 종류는 35종으로 그 중 원료 농산물의 기준이 없는 농약은 4종이 검출되었다. 발효주 종류별로 비교하면 와인이 60건의 검사 중 54건(90%)으로 가장 많은 잔류농약이 검출되었고 맥주는 60건 중 37건(61.7%), 막걸리는 30건 중 11건(36.7%)이 검출되었다. 발효주에 대한 중금속 분석 결과는 납 73건(48.7%), 카드뮴은 9건(6.0%), 수은은 36건(24.0%)을 나타내었다. 납은 73건의 검출 중 와인이 57건(78.1%)을 차지해 가장 높은 검출을 나타내었고 카드뮴과 수은은 검출된 9건, 36건 중 막걸리가 7건(77.8%), 13건(36.1%)으로 가장 많이 검출되었다. 각 품목에서 검출된 잔류농약 및 중금속 항목에 대해 인체노출량 평가결과는 모두 1% 미만으로 안전한 것으로 나타났다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 핵의학기술
• /
• 제14권2호
• /
• pp.33-37
• /
• 2010

관상동맥질환의 진단 및 평가에 있어서 myocardial perfusion SPECT검사와 FDG를 이용한 myocardial PET검사 그리고 PET/CT에 장착된 64-slice CT를 이용한 coronary CT angiography를 동시에 실행함으로 검사의 신뢰도와 편의성을 한층 더 높이고자 한다. 먼저 약물부하 myocardial perfusion SPECT검사를 먼저 시행한다. 환자의 피폭경감을 위해서 $^{99m}Tc$-MIBI 10 mCi 로 주사하며 myocardial PET검사를 위해서 지방식을 먹지 않고 ursodeoxcholic acid 100 mg을 생수와 함께 복용하게 하여 1시간 후에 SPECT 영상을 얻는다. 이어서 myocardial FDG PET검사를 시행한다. 혈중의 지방산 농도를 낮추고 심장의 FDG섭취율을 증가시키기 위해 혈중 포도당 농도치에 따라 insulin과 Acipimox를 함께 사용하는 독창적인 경구 당 부하법을 사용하였으며, 환자의 피폭 경감을 위해서 $^{18}F$-FDG 5 mCi를 주사하고 1시간 후에 10분간 gated 영상을 얻으며 필요시 delay 영상을 얻는다. PET검사가 끝남과 동시에 환자는 동일한 position을 하고 연속해서 coronary CTA를 시행한다. 이 검사에서 가장 중요한 것은 심박동수 조절과 환자의 호흡협조이다. 심박동수를 65회 이하로 낮추기 위해 beta blocker 50 mg~200 mg을 의사와 상의하여 복용케 하고 호흡법을 충분히 연습을 시키다. 검사 직전에 isosorbide dinitrate를 3~5회 분무하여 혈관벽의 긴장을 낮추고 혈관을 확장시켜서 coronary artery의 해부학적 형태를 더욱 잘 나타낼 수 있게 한다. 촬영 시 CT 조영제를 4.0~5.0 mL/sec의 압력으로 주입하며 촬영을 한다. Coronary CTA를 이용하면 coronary artery stenosis가 잘 보이며, 약물부하 myocardial perfusion SPECT로 coronary CTA에서 보인 stenosis와 perfusion저하의 상관관계를 검토(culprit vessel 확인)할 수 있으며, FDG PET으로 hibernating myocardium 또는 infarction site의 viability를 확인할 수 있다. 한 가지 검사로 lesion site와 severity 및 치료에 대한 반응 예측이 가능함으로 약물치료, PCI, CABG 등 치료방향을 설정할 수 있다. 또한 모든 검사 과정들이 연속적으로 동시에 이루어지기 때문에 짧은 시간(3시간) 내에 one-stop으로 검사를 종료할 수 있는 큰 장점을 가지게 된다. 그러므로 이 검사법은 ischemic heart disease의 one-stop evaluation에 있어서 유용한 protocol로 보여진다.

• Journal of Nutrition and Health
• /
• 제49권3호
• /
• pp.165-178
• /
• 2016

본 연구는 50세 이상 한국인을 성 연령군으로 나누어 골밀도에 근거한 골 건강상태와 우유류와 두류 섭취 간의 관련성을 조사하고자 수행되었다. 국민건강영양조사 (2008~2011년)에 참여한 만 50세 이상 남성 3,201명과 여성 3,581명을 대상으로 '50~64세 남성', '50~64세 여성', '65세 이상 남성', '65세 이상 여성' 성 연령군 집단으로 나누어 정상, 골감소증, 골다공증의 골 건강상태에 따른 영양소 및 식품 섭취량을 비교하고, 로지스틱 회귀분석에 의해 우유류와 두류 섭취빈도에 따른 골다공증 오즈비를 구하였다. 통계 분석은 SAS 9.3 version을 이용하였으며, 모든 통계처리는 층화, 집락, 가중치를 고려한 복합표본설계 자료 분석 방법을 적용하였다. 50~64세 남성 1,721명 중 3.8%, 65세 이상 남성 1,480명 중 13.1%가 골다공증이었으며, 50~64세 여성 1,950명 중 15.9%, 65세 이상 여성 1,631명 중 63.0%가 골다공증이었다. 여성이 남성에 비해 4~5배 정도 골다공증 비율이 높고, 남녀 모두 연령 증가와 함께 골다공증 발생이 증가 하였다. 모든 성 연령군 집단에서 대상자의 체중과 체질량지수는 정상, 골감소증, 골다공증 순이었다. 에너지, 단백질, 나트륨, 칼륨, 칼슘 및 비타민 C 섭취량은 남성의 경우 전반적으로 정상, 골감소증, 골다공증 순이었으며, 여성도 유사한 경향을 보였다. 칼슘 섭취량의 사분위 섭취량에 따른 골다공증 오즈비 (OR)가 연령, BMI, 에너지 섭취량에 의한 보정 후 50~64세 여성과 65세 이상 남성에서 4사분위 섭취량이 1사분위 섭취량에 비해 유의하였으며, 칼슘섭취량이 많을수록 골다공증이 감소하는 경향성 (p for trend = 0.01)을 나타내었다. 그러나 음주, 흡연, 신체활동도 포함하여 보정한 후 경향성은 각각 p값이 0.055, 0.051 수준으로 낮아졌다. 50~64세 남성에서 골 건강상태가 나쁠수록 우유류와 우유 섭취량은 감소하는 경향성을 보였으며, 50~64세 여성에서는 골다공증군의 우유류와 우유 섭취량이 골감소증군에 비해 유의하게 적었다. 두류와 두부 섭취량은 모든 성 연령군에서 골 건강상태에 따른 유의적인 차이 및 경향성을 보이지 않았다. 50~64세 남성에서 우유 섭취빈도는 골다공증 위험 감소와 유의적인 관련성을 보이지 않은 반면에 65세 이상 남성에서는 우유 섭취빈도가 월 1회 미만에 비해 주 2회 이상일 경우 골다공증 위험 (OR 0.45, 95% CI 0.24~0.85)이 감소하였고, 감소하는 경향성 (p for trend = 0.022)을 보였다. 50~64세 여성에서 우유를 월 1회 미만 섭취하는 것에 비해 월1회~주1회 (OR 0.63, 95% CI 0.41~0.98) 섭취할 경우 오즈비가 유의하게 낮았다. 요구르트의 경우 50~64세 여성에서 섭취빈도가 높을수록 골다공증 위험이 감소하는 경향성 (p for trend = 0.019)을 보였다. 모든 성 연령군에서 두부 섭취빈도와 골다공증 위험과의 연관성은 나타나지 않은 반면에 두유를 주 2회 이상 섭취한 65세 이상 여성군에서는 골다공증 위험이 높게 나타났다. 혈청 25-hydroxy vitamin D 농도는 50~64세 여성에서 골 건강상태가 나쁠수록 뚜렷하게 낮았다. 이상의 결과를 요약하면, 여성의 경우는 50~64세 연령 시기에 칼슘 섭취량, 우유 및 요구르트 섭취와 골다공증 위험 감소 사이에 연관성이 있으며, 남성의 경우 65세 이후 칼슘 섭취량과 우유 섭취와 골다공증 위험 감소 사이에 연관성이 있었다. 반면 두부, 두유 등 두류 섭취는 골다공증 위험 감소에 효과적이지 않았다. 따라서 50세 이상 한국인에서 성 연령군에 적절한 골 건강상태 향상을 위한 식생활 및 생활습관 관리가 필요한 것으로 판단된다.

• 한국수산과학회지
• /
• 제32권6호
• /
• pp.737-747
• /
• 1999

본 연구는 남극반도 북서부에 해당하는 South Shetland 군도 북쪽 해역에서 과학어군탐지기를 이용한 연속 관측 자료를 이용하여 크릴의 공간적인 분포 (수평, 수직분포) 및 자원량 파악을 주목적으로 하였다. 또한 자원량 계산을 위하여 플랑크톤 네트를 이용한 채집을 실시하였으며, CTD를 이용한 연구 해역의 수온 구조의 수직적 특성을 파악하여 크릴 군집과의 상호 관련성을 규명하고자 하였다. 고밀도의 크릴군은 $1^{\circ}C$ 이상인 Circumpolar Deep Water와 연안쪽에서 형성된 Weddell 해에 기원을 두고 있는 $-0.5^{\circ}C$ 이하의 낮은 온도층 사이에 존재하는 전선역 (frontal area)에서 형성되고있다. 크릴군의 분포 유형은 작은 군집을 이루는 표층 분포, 100$\~$200m 수층의 넓은 띠 모양의 연속적인 분포, 200$\~$300m 수층의 연속적인 분포 그리고 300m 이하의 point scatter분포 둥 네 가지 특징을 보였으며, echogram으로부터 분리해 낸 군집의 최대 수평분포는 약 35 mile에 걸쳐 나타났으며, 최대 수직 분포는 최대 275m의 두께를 보이고 있었다. 채집된 크릴의 표준 길이는 최소 30mm에서 최대 51 mm까지 분포를 나타냈으며, 성체 크릴은 41mm에서 하나의 모드만 나타내고 있었으며 30mm 미만의 미성체크릴은 채집되지 않았다. 자원량 밀도를 정선별로 나타낸 결과, 전체적으로 연안역보다는 대륙사면과 외양에서 높은 분포를 보였으며. 전 층의 평균 밀도는 151.0g/$m^2$였다. 해수의 표층 혼합이 강하게 일어나고 관측 자료 중상층부에 해당하는 22$\~$65m 수 층의 분포는 이 수층에서 전 정선의 평균 밀도는 17.0g/$m^2$로 계산되었으며, 이와 같은 분포는 5개의 수 층 가운데 가장 낮은 분포이다. 중층에 해당하는 115$\~$165m 수 층에서는 1,000m 수심을 경계로 대부분의 고농도 군집이 대륙 사면과 외양 쪽으로 치우치고 대륙붕 쪽으로는 대부분이 10g/$m^2$ 미만의 미약한 어군 형성이 나타나는 상반된 특징을 보였다. 이수충의 평균 밀도는 35.9g/$m^2$로 상층부보다 2배 이상 높게 나타났다. 하층으로 접어드는 165$\~$215m 층의 분포도 1,000m 등심선을 경계로 연안역과 대륙사면에서 상반된 분포를 보이며, 전체적으로 120$\~$l70m 수 층과 유사한 분포를 보이고 있다. 이 수 층의 평균 밀도는 40.2g/$m^2$으로 전 수 층 가운데 가장 높은 분포를 보였다. 관측 자료 중 가장 하층인 215$\~$3l5m 수 층의 평균 밀도는 37.8g/$m^2$로 크릴군이 비교적 깊은 수심까지 존재함을 나타내고 있다. 각 수층에서 예측된 자원량으로부터 22$\~$315m 사이의 총 예측자원량은 약 277만 톤 (CV=$19.92\%$)으로 계산되었으며, 수층별로는 22$\~$65m 에서 전체 양의 $11.2\%$ (31만 톤, CV=$16.24\%$), 65$\~$115 m에서 $13.3\%$ (37만 톤, CV=$34.91\%$), 115$\~$l65m에서 $23.7\%$ (66만 톤, CV=$41.5\%$), 170$\~$220m에서 $26.6\%$ (74만 톤. CV=$27.84\%$) 그리고 215$\~$315m에서 $25\%$ (69만 톤, CV=$26.83\%$)를 차지했다. 이러한 결과로부터 전체 예측된 크릴 자원량의 약 $75\%$가 115m 하층에 분포하여 크릴군이 표층보다는 중층 이하에 높게 분포함을 알 수 있었다.

• 벤처창업연구
• /
• 제12권4호
• /
• pp.47-60
• /
• 2017

본 연구의 목적은 창업보육센터의 창업보육 성과에 영향을 미치는 창업보육 서비스 관련 요인이 무엇인지를 살펴보고자 하며, 창업보육 서비스는 전통적인 물리적 서비스에서 비물리적 서비스까지 다양하다. 이러한 창업보육 서비스 유형들 중에서 실제 창업보육 성과에 영향을 미치는 변인을 규명하고자 한다. 따라서 기존의 창업보육센터의 서비스와 입주기업의 성과와의 관련된 연구을 바탕으로 문화콘텐츠 분야의 기업 관점에서도 유의미한지 재 검증해보고, 또한 문화콘텐츠 기업의 특성상 창업아이템의 사업성이 입주기업의 성과에 유의미한 영향을 미치는지에 대해 검증하고자 한다. 또한 문화콘텐츠 분야의 창업보육 시 필요한 서비스를 발굴하고 빠르게 변화하는 문화콘텐츠 시장의 성장에 따른 아이템의 사업성 평가에 따른 차별화된 창업보육 서비스를 통해 성과가 도출될 수 있도록 체계적이고 합리적인 문화콘텐츠 분야의 창업보육시스템 구축의 중요성에 대해서 논의하고자 한다. 본 연구는 창업보육센터 입주기업 창업자를 연구대상으로 하였고 2016년 10월 14일부터 31일까지 18일 동안에 총 180부를 배포하여 178부 중 30부를 제외하고, 148부를 최종 분석 자료로 활용하였다. 기술통계 분석을 통하여 표본의 특성을 파악한 후, 변수의 타당성 및 신뢰성을 검증하였으며, PLS(Partial Least Square)을 통해 연구 가설을 검증하였다. 가설검증을 통해 분석한 결과를 다음과 같다. 첫째, 경기도 문화콘텐츠 분야 창업보육센터의 지원서비스 수준이 창업아이템의 사업타당성에 미치는 영향을 분석한 결과에서는, 공간 및 부대지원서비스, 경영지원서비스, 기술지원 서비스는 창업아이템의 사업타당성에는 유의한 영향을 미치지 않는 것으로 나타났으며, 인적지원 서비스 및 마케팅 지원 서비스는 유의미한 정(+)의 영향을 미치는 것을 확인 할 수 있었다. 둘째, 경기도 문화콘텐츠 분야 창업보육센터의 지원서비스 수준이 입주기업의 성과에 미치는 영향을 분석한 결과에서는, 공간 및 부대지원 서비스, 인적지원 서비스 및 마케팅지원 서비스는 입주기업의 재무적 성과에 유의미한 정(+)의 영향을 미치는 것을 확인 할 수 있었으나, 경영지원 서비스, 기술지원 서비스는 입주기업의 재무적 성과에 유의미한 영향을 미치지 않는 것으로 나타났다. 또한 공간 및 부대지원 서비스, 경영지원 서비스, 인적지원 서비스 및 마케팅지원 서비스는 입주기업의 비재무적 성과에 유의미한 정(+)의 영향을 미치는 것을 확인 할 수 있었으나. 기술지원 서비스는 입주기업의 비재무적 성과에 유의한 영향을 미치지 않는 것으로 나타났다. 셋째, 경기도 문화콘텐츠 분야 창업아이템의 사업타당성이 입주기업의 성과에 미치는 영향을 미치는 것을 분석한 결과 창업아이템의 사업타당성이 입주기업의 성과(재무적,비재무적) 성과에 모두 영향을 미치는 중요한 요소임을 확인 할 수 있었다.

• 한국문헌정보학회지
• /
• 제17권
• /
• pp.11-47
• /
• 1989

This study intends to examine the background and the procedure of the carving of the tablets of the second edition of Dae-Jang-Mock­Lock(재조대장목록). the time and the route of the moving of the tablets. into Haein-sa, and the contents and the system of it. This study is mainly based on the second edition of Dae-Jang-Mock-Lock. But the other closely related materials such as restored first. edition of the Dae- Jang-Mock-Lock, Koryo Sin-Jo-Dae-Jang-Byeol-Lock (고려신조대장교정별록). Kae-Won-Seok-Kyo-Lock (개원석교록). Sok-Kae­Won-Seok-Kyo-Lock (속개원석교록). Jeong-Won-Sin-Jeong-Seok-Kyo­Lock(정원신정석교록), Sok-Jeong-Won-Seok-Kyo-Lock(속정원석교록), Dea-Jung-Sang-Bu-Beob-Bo-Lock(대중상부법보록), and Kyeong-Woo-Sin-Su-Beob-Bo-Lock(경우신수법보록), are also analysed and closely examined. The results of this study can be summarized as follows: 1. The second edition of Tripitaka Koreana(고려대장경) was carved for the purpose of defending the country from Mongolia with the power of Buddhism, after the tablets of the first edition in Buin-sa(부이사) was destroyed by fire. 2. In 1236. Dae-Jang-Do-Gam(대장도감) was established, and the preparation for the recarving of the tablets such as comparison between the content, of the first edition of Tripitalk Koreana, Gal-Bo-Chik-Pan-Dae­Jang-Kyeong and Kitan Dae- Jang-Kyeong, transcription of the original copy and the preparation of the wood, etc. was started. 3. In 1237 after the announcement of Dae-Jang-Gyeong-Gak-Pan-Gun­Sin-Gi-Go-Mun(대장경핵판군신석고문), the carving was started on a full scale. And seven years later (1243), Bun-Sa-Dae-Jang-Do-Gam(분사대장도감) was established in the area of the South to expand and hasten the work. And a large number of the tablets were carved in there. 4. It took 16 years to carve the main text and the supplements of the second edition of Tripitaka Koreana, the main text being carved from 1237 to 1248 and the supplement from 1244 to 1251. 5. It can be supposed that the tablets of the second edition of Tripitaka Koreana, stored in Seon-Won-Sa(선원사), Kang-Wha(강화), for about 140 years, was moved to Ji-Cheon-Sa(지천사), Yong-San(용산), and to Hae-In-Sa(해인사) again, through the west and the south sea and Jang-Gyeong-Po(장경포), Go-Ryeong(고령), in the autumn of the same year. 6. The second edition of Tripitaka Koreana was carved mainly based on the first edition, comparing with Gae-Bo-Chik-Pan-Dae-Jang-Kyeong(개보판대장경) and Kitan Dae-Jang-Kyeong(계단대장경). And the second edition of Dae-Jang-Mock-Lock also compiled mainly based on the first edition with the reference to Kae-Won-Seok-Kyo-Lock and Sok-Jeong-Won-Seok-Kyo-Lock. 7. Comparing with the first edition of Dae-Jang-Mock-Lock, in the second edition 7 items of 9 volumes of Kitan text such as Weol-Deung­Sam-Mae-Gyeong-Ron(월증삼매경론) are added and 3 items of 60 volumes such as Dae-Jong-Ji-Hyeon-Mun-Ron(대종지현문논) are substituted into others from Cheon chest(천함) to Kaeng chest(경함), and 92 items of 601 volumes such as Beob-Won-Ju-Rim-Jeon(법원주임전) are added after Kaeng chest. And 4 items of 50 volumes such as Yuk-Ja-Sin-Ju-Wang-Kyeong(육자신주왕경) are ommitted in the second edition. 8. Comparing with Kae-Won-Seok-Kyo-Lock, Cheon chest to Young chest (영함) of the second edition is compiled according to Ib-Jang-Lock(입장록) of Kae-Won-Seok-Kyo-Lock. But 15 items of 43 vol­umes such as Bul-Seol-Ban-Ju-Sam-Mae-Kyeong(불설반주삼매경) are ;added and 7 items of 35 volumes such as Dae-Bang-Deung-Dae-Jib-Il­Jang-Kyeong(대방등대집일장경) are ommitted. 9. Comparing with Sok-Jeong-Won-Seok-Kyo-Lock, 3 items of the 47 volumes (or 49 volumes) are ommitted and 4 items of 96 volumes are ;added in Caek chest(책함) to Mil chest(밀함) of the second edition. But the items are arranged in the same order. 10. Comparing with Dae- Jung-Sang-Bo-Beob-Bo-Lock, the arrangement of the second edition is entirely different from it. But 170 items of 329 volumes are also included in Doo chest(두함) to Kyeong chest(경함) of the second edition, and 53 items of 125 volumes in Jun chest(존함) to Jeong chest(정함). And 10 items of 108 volumes in the last part of Dae-Jung-Sang-Bo-Beob-Bo-Lock are ommitted and 3 items of 131 volumes such as Beob-Won-Ju-Rim-Jeon(법원주임전) are added in the second edition. 11. Comparing with Kyeong-Woo-Sin-Su-Beob-Bo-Lock, all of the items (21 items of 161 volumes) are included in the second edition without ;any classificatory system. And 22 items of 172 volumes in the Seong­Hyeon-Jib-Jeon(성현집전) part such as Myo-Gak-Bi-Cheon(묘각비전) are ommitted. 12. The last part of the second edition, Joo chest(주함) to Dong chest (동함), includes 14 items of 237 volumes. But these items cannot be found in any other former Buddhist catalog. So it might be supposed as the Kitan texts. 13. Besides including almost all items in Kae-Won-Seok-Kyo-Lock and all items in Sok-Jeong-Won-Seok-Kyo-Lock, Dae-Jung-Sang-Bo­Beob-Bo-Lock, and Kyeong-Woo-Sin-Su-Beob-Bo-Lock, the second edition of Dae-Jang-Mock-Lock includes more items, at least 20 items of about 300 volumes of Kitan Tripitaka and 15 items of 43 volumes of traditional Korean Tripitake that cannot be found any others. Therefore, Tripitaka Koreana can be said as a comprehensive Tripitaka covering all items of Tripitakas translated in Chinese character.