• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 1부
• /
• pp.382-384
• /
• 2011

경계석을 제작하는 제조 공정 중 모서리를 가공하는 공정은 인력의 숙련도와 분진 등의 악조건의 환경에서 인력에 의존하는 강도 높은 제조 공정이다. 특히 인력에 의존하다보니 효율성과 정확성이 현저하게 떨어지는 것이 기존의 상황이다. 본 연구는 이와 같은 일련의 작업을 가공기를 통한 자동화 장비를 통하여 수행 할 수 있도록 설계, 제작하였으며 경계석용 모서리 자동 모따기 가공기를 개발하기 위한 기구적 설계, 제어 방법을 연구하였다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2002년도 춘계학술대회
• /
• pp.322-322
• /
• 2002

치경부 병소는 부적절한 칫솔질, 화학적 침식 및 차아의 굴곡 등의 여러 원인에 의해 크게 cervical abrasion, erosion 및 abfraction의 형태로 나타난다. 최근 노령 환자층의 증가와 치주 치료에 의한 구강내 치아 잔존율의 증가는 치경부 병소의 증가를 가져왔다. 이러한 치경부 병소는 지각과민증, 우식 및 심미적 이유 등으로 수복을 시행하며 구치부위에 작은 우식이 없는 치경부 병소가 있는 경우 환자에게서 지각과민증를 유발하지 않는 경우라면 수복을 시행하지 않을 수도 있지만, 많은 예에서 더 이상의 치아 및 치주 조직의 손상을 억제하고 치수의 보호를 위해서 수복을 시행한다. 특히 전치부의 경우에는 병소가 작고 우식에 이완되지 않았다 할지라도 그 심미적 측면 때문에 수복을 시행하는 예가 증가하고 있다.(중략)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.130-134
• /
• 2005

The objectives of this study are to improve the aerodynamics performance on the down-wind blade system with folding type blade which consists of the folding type rotor blade, wind vane yawing stabilizer and a bevel gearbox. The aerodynamics performance for the new wind turbine system are compared with those of the conventional up-wind blade system. In addition to, a novel multi voltage inverter system is applied for reductions of harmonic.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.139-142
• /
• 2009

As important mechanical elements, gears have been used widely in power transferring systems such as automobile transmission and there have been several researches trying to make gear parts with cold or warm forging in order to reduce cost and time required to gear manufacturing process. Although forging processes of spur and bevel gears have been developed as practical level owing to active previous researches in Korea, the manufacturing of helical gear has been still depended on traditional gear cutting processes such as hobbing, deburring and shaving. In order to manufacture helical gears with cold forging process, a research project supported by government has been conducted by Daegu university, KIMS and TAK and this paper deals with effects of back pressure forming technique to cold forging of helical gear as a fundamental research.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.324-325
• /
• 2005

The primary aim of this paper is to develop an automated welding system capable of adapting to variation in the weld seam center in order to allow higher welding speeds and improved welding quality by using a laser vision sensor. The system is designed to compensate for production problems such as pipe ovality, variation in bevel geometry and track misalignment.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.121-124
• /
• 1990

The purpose of this study was to evaluate the effect of three different retention forms on the bond strength when complete denture repaired. Total 75 samples were divided into 3 groups(Dove-tail form, bevel form, rabbit form). The completed resin samples were compressed in Instron Testing Machine until gross fracture occurred to examine the effect on the bond strength of resin base. The results of the experiment were as follows : 1. The difference of bond strength according to three retention forms were not statistically significant(P>0.05). 2. Dove-tail form was strongest to bond strength among the three retention forms.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.99-103
• /
• 2014

A hypoid gear is a type of spiral bevel gear whose axis does not intersect with the axis of the meshing gear. The size of a hypoid gear is compact and the ratio of contact is high; therefore, the noise is lower than in other types. Due to these characteristics, the hypoid gear is commonly used in manufacturing processes such as those of escalators and subway screen doors. The purpose of this paper is to develop a reducer using the hypoid gear. In order to check the stability of the proposed reducer, 3D modeling is carried out by CATIA, and a structural analysis is performed using FEM (a finite element method).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.289-292
• /
• 2001

A Dual rotor turbines HAWT/VAWT combined wind turbine system that can drastically enhance the power production capability compared to conventional Single Rotor Turbine HAWT system. The combined system that takes advantage of strong point of both horizontal and vertical Axis wind turbine system developed by a venture firm : KOWINTEC of Chonbuk National University. The HAWT/VAWT hybrid system has been successfully field tested and commercial operation since Feb. 12, 2001 in Hae-chang rest park, Bu-an county near the Sae Man-Kum Sea Dike. This paper will briefly describe the field test results performance and a special aerodynamic structure with bevel-planetary gear box of Dual Rotor Wind Turbine system.

• Journal of electromagnetic engineering and science
• /
• 제6권1호
• /
• pp.53-61
• /
• 2006

In this paper, we present parametric studies for the optimum design of a hexagonal plate monopole antenna. The dependence of the antenna performance on various geometric parameters is investigated using a commercial electromagnetic software, from which an optimum design of a hexagonal plate monopole antenna is derived. Guidelines for determining initial parameter values are given. The diameter of the circular ground plane is minimized tlo 1/5 wavelength at the lowest operating frequency. The antenna impedance matching is controlled by adjusting the gap between the plate and the ground plane, the plate base width, and the base bevel angle. The antenna proposed in. this paper shows a reflection coefficient less than -10 dB and a $2.0{\sim}6.2$ dBi gain over $3{\sim}20$ GHz frequencies.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.1-6
• /
• 2000

Adaptive optics(AO) removes or compensates the distortion caused by a turbulent atmosphere or medium. A wavefront sensormeasures the distortion, on which the correction of AO is based. A new idea of pupil plane wavefront sensing, which consists of a relay lens and a pyramidal-shaped prism, was previously proposed. This paper reviews the idea of pupil wavefrontsensing and presents prism, was previously proposed. The simulation shows that pupilwavefront sensing provides full wavefront sensing when the intensity peak of PSF is located within half of the Airy radius from the apex of the sensor. Adding to this, the sensor is shown to have optimum sensor output with a finite bevel size of the pyramidal prism.