• 지식경영연구
• /
• 제25권1호
• /
• pp.155-172
• /
• 2024

이 연구의 목적은 가상환경에서의 다양한 환경 변화를 통한 외국어 학습 효과를 조사하는 것이다. 이를 위해 가상환경 공간을 교실과 식료품점으로 구분한 후, 여기에 각각 세 종류의 자막으로 구성된 텍스트 강화기법을 적용한 몰입형 가상현실 영어학습 콘텐츠를 직접 제작한 후 학습 효과를 비교했다. 실험은 2 × 3 혼합요인설계로 구성됐으며, 가상환경 공간은 실험자 내 요인으로 실험참여자는 학습 공간에 따라 처치 수준이 다른 두 개의 영상에 노출됐고, 텍스트 강화기법은 실험자 간 요인으로 실험참여자는 텍스트 강화기법에 따라 처치 수준이 다른 세 개의 자막 중 무작위로 한 개의 자막에 노출됐다. 가상환경 공간과 텍스트 강화기법에 따른 상호작용 효과 분석 결과, 프레즌스가 통계적으로 유의미한 차이를 보였다. 공간의 주효과를 살펴본 결과, 플로우와 학습 전-후 가상현실 교육 태도에 대해 통계적으로 유의미한 차이가 있었고, 텍스트 강화기법의 주효과를 분석한 결과, 플로우, 가상현실 학습 이용의도, 학습 만족도와 학습 자신감에서 통계적으로 유의미한 차이가 있었다. 결과적으로 가상현실 공간의 제공 환경에 따라 학습자의 교육에 대한 몰입과 태도 차이를 확인할 수 있었고, 자막 제공 방식에 따라 다양한 교육 효과의 차이가 있음을 확인할 수 있었다. 이는 가상환경에서 외국어 교육의 효과를 긍정적으로 확인한 것인데, 학교와 학원 등에서 가상환경을 활용한 영어학습 서비스의 가능성을 제시하고, 다양한 가상환경의 변화에 따라 교육 효과가 달라질 수 있다는 함의를 제공한다.

• Journal of Communications and Networks
• /
• 제12권5호
• /
• pp.459-465
• /
• 2010

A new blind equalization algorithm that is based on maximizing the probability that the constant modulus errors concentrate near zero is proposed. The cost function of the proposed algorithm is to maximize the probability that the equalizer output power is equal to the constant modulus of the transmitted symbols. Two blind information-theoretic learning (ITL) algorithms based on constant modulus error signals are also introduced: One for minimizing the Euclidean probability density function distance and the other for minimizing the constant modulus error entropy. The relations between the algorithms and their characteristics are investigated, and their performance is compared and analyzed through simulations in multi-path channel environments. The proposed algorithm has a lower computational complexity and a faster convergence speed than the other ITL algorithms that are based on a constant modulus error. The error samples of the proposed blind algorithm exhibit more concentrated density functions and superior error rate performance in severe multi-path channel environments when compared with the other algorithms.

• The Korean Journal of Ecology
• /
• 제14권4호
• /
• pp.399-413
• /
• 1991

Benthic macroinvertebrate communities and environments at the upper and lower sites of levees in the middle reaches of paenae stream, a tributary of the naktong river,were investigated in four seasons from August 1989 to may 1990. Current velocities were significantly fast at the loer sites than the upper sites of levees. Substratum compositions were also different between these two sites. Abundances of major species of benthic macroinvertebrates occurring in four seasons were primarily dtermined by temperature. in each location of levees, however, current velocities and substratum particle sizrs were important in determining species were generally higher than upper sites of levees. Biological indices were also high at the lower sites of levees. diversity, evenness and dominance indices were positively correlated with the quantity of the middle-sized large pebbles(3∼5cm in diameter) in stream bed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.107-112
• /
• 2005

Recently proposed stable teleoperation control scheme, base on time domain passivity, is modified to remove several conservatisms. During unconstrained motion and contacting with soft and deformable environments, the two-port time domain passivity approach [21] was excessively dissipating energy even though it was stable without any energy dissipation. The main reason of this conservatism is on the fact that the time domain passivity controller does not include the external energy dissipation elements at the slave manipulator. The measured interaction force between slave and environment allow the time domain passivity observer to include the amount of energy dissipation of the slave manipulator to the monitored energy. With the modified passivity observer, reference energy following idea [24] is applied to satisfy the passivity condition. The feasibility of the developed methods is proved with experiments. Improved performance is obtained in unconstrained motion and contacting with a soft environment.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권4호
• /
• pp.63-72
• /
• 2016

Nominal compounds of 'N1 + N2'in Korean can be classified into the following three major categories: co-compound, sub-compound, and fusion. Among these three major categories, insertion of /t/ in the compounding process and subsequent tensification are found only in sub-compounds. This peculiar phenomenon of /t/-insertion which causes, in turn, tensification in sub-compounds has been long controversial because linguists have not been able to expect in which phonological environment of sub-compounding insertion of /t/ takes place. In this paper, I explore a phonological rule which makes it possible to expect the phonological environments of sub-compounding that allow insertion of /t/ and automatic tensification of the subsequent consonant in the onset of N2. In this process, I show that semantic feature(s) between two combined roots should be considered as one of the important structural descriptions in phonology.

• 통합자연과학논문집
• /
• 제7권2호
• /
• pp.120-123
• /
• 2014

When a hydrophobic and hydrophilic environments of bis(2,2'-bipyridyl) copper(II) ($Cu(bpy)_2{^{2+}}$) are produced in the presence of anionic surfactant sodium dodecyl sulfate (SDS), cyclic voltammetry is used to investigate the microscopic environments which occurs at the glassy carbon electrode. In order to see the relation between ${\Delta}E_p$ and a critical micelle concentration (CMC), ${\Delta}E_p$ vs. -Log[SDS] for the redox couples are plotted. The concentration at the intersection of two lines is 2.57 mM SDS, and this concentration can be determined as the CMC (relative error: below 0.03%; 2.63 mM SDS by surface tensiometry).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.60-61
• /
• 2013

For reinforced concrete structures located in a sea environment, the Impressed Current Cathodic Protection (ICCP) is mostly used as a signature method to prevent steel corrosion. For this research, specimens to which the ICCP is applied were manufactured under the assumption of two following cases the specimens are exposed to various salt damage environments (submerged zone, tidal zone), and deteriorative factors (crack) occur in concrete. For the specimens manufactured, an enhancement experiment for deterioration was conducted through regular cycle change under the temperature between 15 ~ 70℃ with 70 ~ 90% humidity. Afterwards, the method effect was verified through a half-cell method and application of the ICCP derived from salt damage environments was investigated.

• 대한음성학회지:말소리
• /
• 제60호
• /
• pp.145-164
• /
• 2006

This paper proposes class histogram equalization (CHEQ) to compensate noisy acoustic features for robust speech recognition. CHEQ aims to compensate for the acoustic mismatch between training and test speech recognition environments as well as to reduce the limitations of the conventional histogram equalization (HEQ). In contrast to HEQ, CHEQ adopts multiple class-specific distribution functions for training and test environments and equalizes the features by using their class-specific training and test distributions. According to the class-information extraction methods, CHEQ is further classified into two forms such as hard-CHEQ based on vector quantization and soft-CHEQ using the Gaussian mixture model. Experiments on the Aurora 2 database confirmed the effectiveness of CHEQ by producing a relative word error reduction of 61.17% over the baseline met-cepstral features and that of 19.62% over the conventional HEQ.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권1호
• /
• pp.1-9
• /
• 2001

The promise of improved productivity and quality has lead to numerous research investigations in machining process monitoring and control. Recent studies have demonstrated that careful attention must be paid to the regulation of multiple process modules within a single operation such that each module performs its function properly and adverse interactions between modules do not occur. This had lead to the development of supervisory control; particularly to the development of methodologies to systemati-cally construct and implement these controllers. However, no research study has investigated the effect of the production environ-ment on the design of supervisor controllers. In this paper, the design of supervisory controllers for various production environ-ment is studied. The design approach given in Landers and Ulsoy(1998) is applied to construct two supervisory machining control-lers that are experimentally implemented in a face milling operation. Comparisons with an experimental implementation without process control illustrate the benefits of utilizing process controllers that are coordinated properly. The results also show that the given design approach may be used to construct supervisory controllers for different types of production environments.

• Journal of Information Processing Systems
• /
• 제11권3호
• /
• pp.483-494
• /
• 2015

High Efficiency Video Coding (HEVC) is the most recent video codec standard of the ITU-T Video Coding Experts Group and the ISO/IEC Moving Picture Experts Group. The main goal of this newly introduced standard is for catering to high-resolution video in low bandwidth environments with a higher compression ratio. This paper provides a performance comparison between HEVC and H.264/AVC video compression standards in terms of objective quality, delay, and complexity in the broadcasting environment. The experimental investigation was carried out using six test sequences in the random access configuration of the HEVC test model (HM), the HEVC reference software. This was also carried out in similar configuration settings of the Joint Scalable Video Module (JSVM), the official scalable H.264/AVC reference implementation, running on a single layer mode. According to the results obtained, the HM achieves more than double the compression ratio compared to that of JSVM and delivers the same video quality at half the bitrate. Yet, the HM encodes two times slower (at most) than JSVM. Hence, it can be concluded that the application scenarios of HM and JSVM should be judiciously selected considering the availability of system resources. For instance, HM is not suitable for low delay applications, but it can be used effectively in low bandwidth environments.