• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1193-1201
• /
• 2004

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations fur typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). It was also shown that phase-resolved averaged temperature oscillated in phase with pressure cycle, while normalized standard deviations which represent temporal turbulent intensity of temperature showed nearly constant value around 0.1. The characteristics on the occurrence of high temperature also displayed periodic wave form which was very similar to the pressure signal. And the amplitude of this profile went larger as the fuel/air mixing quality became poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.103-108
• /
• 2003

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations for typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). The characteristics on the occurrence of high temperature also displayed periodic wave form which is very similar to the pressure signal. And the amplitude of this profile goes larger as the fuel/air mixing quality become poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• 콘크리트학회논문집
• /
• 제17권2호
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

• Nuclear Engineering and Technology
• /
• 제19권2호
• /
• pp.107-114
• /
• 1987

$^{137}$Cs 용액을 추적자로 사용하여 동시와 역동시 계수방법에 의해 $^{137}$Cs 용액의 방사능을 측정하였다. 본 연구에서의 측정선원은 $^{137}$Cs과 추적자를 혼합하여 제작하였으며 혼합 비율은 동시와 역동시 계수 방법에서 각각 1/3과 1/5로 하였다. $^{137}$Cs용액의 비 방사능은 $\beta$채널 저에너지 문턱 준위 변화와 효율외삽 방법에 의해 산출되었다. 동시와 역동시 계수 방법에 의해 산출된 결과는 기준일 현재 552.78kBq/g과 554.32kBq/g이었으며 합성오차는 각각 1.60kbq/g과 1.51kBq/g이었다. 두 개의 결과는 오차범위 내에서 잘 일치함을 보여준다.

• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.645-653
• /
• 2021

바이오폴리머는 살아있는 유기체에 의해 생성되는 고분자 화합물의 통칭이다. 이 중 미생물의 부산물로 만들어지는 유기성 고분자 화합물인 잔탄, 베타글루칸 등은 물질의 점성을 높이는데 사용되는데 이를 물에 희석하여 모래나 진흙과 혼합하면 압축강도와 전단강도를 높일 수 있다. 본 연구에서는 특수하게 흙의 강도를 높이기 위한 목적으로 개발된 잔탄 및 베타글루칸 계열의 바이오폴리머와 흙을 혼합하여 제조한 배합토를 하천 제방 호안에 도포하고 겨울을 지낸 후의 변화를 3차원 지상 LiDAR를 활용하여 모니터링 하였다. 동절기 전후 지상 LiDAR 측량을 통하여 취득한 3차원 점군자료를 이용하여 테스트베드 주요 구간의 변화를 분석한 결과 바이오폴리머 배합토를 도포한 두 구간에서는 눈으로는 확인하기 어려울 정도로 변화가 없었던 반면 바이오폴리머 배합토를 사용하지 않은 자연제방 구간에서는 세류침식(Rill erosion)으로 인한 토양손실이 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.91-99
• /
• 2007

소나무, 낙엽송, 리기다소나무, 잣나무 등 국내산 침엽수 목분을 기질로 진탕배양했을 때 갈색부후균인 Fomitopsis palustris로부터 분비된 당 분해성 균체 외 효소는 Endoglucanase (EG), $\beta$-glucosidase (BGL) 및 $\beta$-1,4-xylosidase (BXL)와 함께 결정형 셀룰로오스를 분해하는 Cellobiohydrolase (CBH)도 활성을 갖은 것으로 나타났다. 4주간 배양에서 변재는 심재에 비해 큰 효소활성을 나타냈으나, 배양기간을 증가시킴으로써 효소활성이 커지는 것으로 밝혀져 효소에 의한 목질바이오매스 분해의 경우 심변재 혼합처리도 가능할 수 있음이 시사되었다. 그리고, 균체 의 단백질을 SDS-PAGE로 분석한 결과, 대부분의 수종에서 나타나는 효소의 단백질 패턴은 거의 유사한 것으로 나타나 효소를 이용한 목질계 바이오매스 분해의 경구 수종별 혼합처리도 가능함이 시사되었다. F. palustris에 의해 분해된 목분(60 mesh 통과) 셀룰로오스의 결정화도 감소율은 4주 배양에서 약 4.2~20.4%, 8주 배양에서 약 12.9~28.9% 수준으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.163-170
• /
• 2008

Purpose: Biphasic calcium phosphates have been of great interest recently. Mixing adequate ratios of hydroxyapatite(HA) and beta-tricalcium phosphate($\beta$-TCP) allowed to control the resorption rate without distorting its osteoconductive property. This study evaluated the bone formation effect of newly developed biphasic calcium phosphate(BCP) in calvarial defect of rabbits. Materials and Methods: 6 male New Zealand rabbits were used. Four defects with 8mm in diameter were created on each animal. BCP with HA/$\beta$-TCP ratio of 7:3 and particle size of $0.5{\sim}1.0\;mm$ was used as the test group and bovine bone with $0.25{\sim}1.0\;mm$ particle size, as the control group. Both test and control group materials were randomly implanted in the calvarial defects and were covered witha polymer membrane. The animals were sacrificed after 12, 24, and 48 weeks of implantation under general euthanasia. Resin blocks were obtained and were stained by masson's trichrome for histological observation. Results: Overall results were uneventful without any defect exposure or inflammation. The amount of new bone formation and bone maturity increased with increase in healing period at both groups. New bone in test group was mostly formed along the material particle surrounded by osteoblasts, and observation of osteoblastic stream was also present. Bone maturity increased as it was closer to thedefect margins. Under the same healing period, the test group showed more bone formation than the control group with more stable bovine bone particles remaining even after 48 weeks, whereas considerable resorption took place in BCP. Almost total defect closure was observed in test group with new bone formation in the central part of the defect. However, limited new bone formation was observed in the control group. Conclusion: Within the limits of the study, the present study reveals the newly developed BCP to be a good osteoconductive material. However, further studies are needed to be conducted in a different study model with a larger sample size.

• 한국약용작물학회지
• /
• 제27권4호
• /
• pp.247-258
• /
• 2019

Background: Astragali radix (A) and Lithospermi radix (L) have long been used as traditional medicines due to their known anti-inflammatory effects. This study aimed at evaluating, their optimal mixing ratio and their functional compounds by investigating the inhibitory effects of mixed extracts of A and L and their active compounds on matrix metalloproteinases (MMPs). Methods and Results: A and L extracts were obtained by extraction at $80^{\circ}C$ using 50% and 70% fermented alcohol, respectively, and then mixed at a ratio of 5 : 5, 6 : 4, 7 : 3 and 8 : 2 (w/w). The activities of MMP-1, MMP-3, and MMP-13 were evaluated in interleukin-1beta ($IL-1{\beta}$)-induced SW1353 cells. The extract mixtures showed synergistic inhibitory effects on MMP-3 and MMP-13, higher than the effects of the individual A and L extracts. The 7 : 3 mixture (ALM16) showed the most effective MMPs inhibitory activity, while among the active ingredients, calycosin-7-O-${\beta}$-D-glucoside and lithospermic acid exhibited excellent MMPs inhibitory activity. Additionally, an HPLC method was established for simultaneous quantification of the effective components of the extract mixtures, and validated by measuring the linearity, precision and accuracy of the limit of detection (LOD) and limit of quantification (LOQ). Conclusions: ALM16 showed the most effective MMPs inhibitory activity. Calycosin-O-${\beta}$-D-glucoside, calycosin and lithospermic acid were identified as useful candidates, as they were the major functional compounds in the MMP inhibitory activity. Summarily, ALM16 might be a highly effective in osteoarthritis management, owing to its because it exhibits a protective effect on cartilage via excellent inhibition of MMPs.

• Journal of Pharmaceutical Investigation
• /
• 제22권4호
• /
• pp.267-279
• /
• 1992

Microencapsulations of amoxicillin and cephalexin, using Eudragit RS, RL, E, S and L were investigated. The microcapsules were prepared by the solvent evaporation process in liquid paraffin phase, which is based on dispersion of acetone/isopropanol containing the drug in liquid paraffin. Aluminium tristearate was used as an additive for the preparation of microcapsules. The size distribution, dissolution test and observation by SEM were examined. Good reproducibility in microcapsule preparation was observed. The microcapsules obtained were spherical and free-flowing particles. The dissolution rates of amoxicillin and cephalexin from the microcapsules were considerably decreased as compared with those from amoxicillin and cephalexin powder, respectively. As the dispersing agents (aluminium tristearate) increased, the particle size of microcapsules decreased and the dissolution rate increased. In order to control the release rate of drugs, microcapsules were prepared by mixing Eudragit RS/RL or Eudragit S/L. As Eudragit RL ratio in microcapsule of Eudragit RS/RL increased, the dissolution rate increased. As Eudragit L ratio in microcapsule of Eudragit S/L increased, the dissolution rate increased. Furthermore, the release rates of drugs from Eudragit RS/L or RS/polyelthylene glycol 1540 (PEG 1540) were examined. The dissolution rate of drugs increased with increasing of Eudragit L or PEG 1540 ratio. In conclusion, the release rates of drugs from Eudragit RS/RL or RS/PEG 1540 microcapsule could be controlled, and these microcapsules will be convenient for reducing frequency of administration.

• 한국게임학회 논문지
• /
• 제15권2호
• /
• pp.105-114
• /
• 2015

뇌파 및 심전도 생체신호를 복합적으로 이용한 감정인식을 통한 실시간 사용자 인터페이스를 제안한다. 기존에 뇌파를 통한 감정인식의 문제점이었던 낮은 정확도를 개선하기 위해 뇌파의 Theta, Alpha, Beta, Gamma의 상대파워 값과 심전도의 자율신경계 비율을 혼합하는 복합 생체신호 감정 인식 시스템을 개발했다. 기쁨, 공포, 슬픔, 즐거움, 화남, 혐오에 해당하는 6가지 감정을 인식하기 위해 사용자별 확률 값을 저장하는 데이터 맵을 생성하고, 채널에 대응하는 감정 인식의 정확도를 향상시키기 위해 가중치를 갱신하는 알고리즘을 제안한다. 또한 뇌파로 구성된 단일 데이터와 뇌파/심전도 생체신호 복합 데이터의 실험 결과를 비교한 결과 23.77%의 정확도 증가를 보였다. 제안된 인터페이스 시스템은 높은 정확도를 통해 게임 및 스마트 공간의 제어에 필요한 인터페이스로 기기에 활용이 가능할 것이다.