• Water Engineering Research
• /
• 제3권2호
• /
• pp.85-92
• /
• 2002

There has been continuous efforts to manage water resources for the required water quality criterion at river channel in Korea. However, we could obtain the partial improvement only for the point sources such as, waste waters from urban and factory site through the water quality management. Therefore, it is strongly needed that the best management practice throughout the river basin fur water quality management including non-point sources pollutant loads. This problem should be resolved by recognizing the non-point sources pollutant loads from the upstream river basin to the outlet of the basin depends on the landuse and soil type characteristics of the river basin using the computer simulation by a distributed model based on the detailed investigation and application of Geographic Information System (GIS). The purpose of this study is consisted of the three major distributions, which are the investigation of spread non-point sources pollutants throughout the river basin, development of the base maps to represent and interpret the input and outputs of the distributed simulation model, and prediction of non-point sources pollutant loads at the outlet of a up-stream river basin using Agricultural Non-Point Sources Model (AGNPS). For the validation purpose, the Seom-Jin River basin was selected with two flood events in 1998. The results of this application showed that the use of combined a distributed model and an application of GIS was very effective fur the best water resources and quality management practice throughout the river basin

• 품질경영학회지
• /
• 제31권1호
• /
• pp.90-108
• /
• 2003

This study deals with a case analysis on the implementation of ISO 9000/14000 Integrated Management System. The intention is to provide some general guidelines, in particular, to small-to-medium-sized companies that are planning to introduce the Integrated Management System. First we briefly review each of the ISO 9000 series, ISO 14000 series and Integrated Management System. We then investigate the case of a small-sized company that have built and is successfully operating the Integrated Management System. We start with introducing the company, and then examine the background and the procedure for implementing the Integrated Management System. We investigate effects of the Integrated Management System, which are the main focus of this paper. This study is meaningful in that, to our best knowledge, it is the first field report appearing in the literature in regard to the actual implementation of ISO 9000/14000 Integrated Management System in Korea.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권2호
• /
• pp.799-805
• /
• 2016

Background: There is no standard treatment for patients with platinum-resistant or refractory epithelial ovarian cancer. Single agent chemotherapies have evidence of more efficacy and less toxicity than combination therapy. Most are very expensive, with appreciable toxicity and minimal survival. Since it is difficult to make comparison between outcomes, economic analysis of single-agent chemotherapy regimens and best supportive care may help to make decisions about an appropriate management for the affected patients. Objective: To evaluate the cost effectiveness of second-line chemotherapy compared with best supportive care for patients with platinum-resistant or refractory epithelial ovarian cancer. Materials and Methods: A Markov model was used to estimate the effectiveness and total costs associated with treatments. The hypothetical patient population comprised women aged 55 with platinum-resistant or refractory epithelial ovarian cancer. Four types of alternative treatment options were evaluated: 1) gemcitabine followed by BSC; 2) pegylated liposomal doxorubicin (PLD) followed by BSC; 3) gemcitabine followed by topotecan; and 4) PLD followed by topotecan. Baseline comparator of alternative treatments was BSC. Time horizon of the analysis was 2 years. Health care provider perspective and 3% discount rate were used to determine the costs of medical treatment in this study. Quality-adjusted life-years (QALY) were used to measure the treatment effectiveness. Treatment effectiveness data were derived from the literature. Costs were calculated from unit cost treatment of epithelial ovarian cancer patients at various stages of disease in King Chulalongkorn Memorial Hospital (KCMH) in the year 2011. Parameter uncertainty was tested in probabilistic sensitivity analysis by using Monte Carlo simulation. One-way sensitivity analysis was used to explore each variable's impact on the uncertainty of the results. Results: Approximated life expectancy of best supportive care was 0.182 years and its total cost was 26,862 Baht. All four alternative treatments increased life expectancy. Life expectancy of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 0.510, 0.513, 0.566, and 0.570 years, respectively. The total cost of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 113,000, 124,302, 139,788 and 151,135 Baht, respectively. PLD followed by topotecan had the highest expected quality-adjusted life-years but was the most expensive of all the above strategies. The incremental cost-effectiveness ratios (ICER) of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 344,643, 385,322, 385,856, and 420,299 Baht, respectively. Conclusions: All of the second-line chemotherapy strategies showed certain benefits due to an increased life-year gained compared with best supportive care. Moreover, gemcitabine as second-line chemotherapy followed by best supportive care in progressive disease case was likely to be more effective strategy with less cost from health care provider perspective. Gemcitabine was the most cost-effective treatment among all four alternative treatments. ICER is only an economic factor. Treatment decisions should be based on the patient benefit.

• 한국물환경학회지
• /
• 제29권1호
• /
• pp.29-35
• /
• 2013

Recently, various Best Management Practices (BMPs) have been applied at a field to reduce soil erosion. Hourly Runoff and Sediment Model for Best Management Practices (HRSM4BMP) model could be used to evaluate soil erosion reduction for various agricultural BMPs at fields. Runoff and sediment yield from source areas have to be predicted with greater accuracies to evaluate sediment reduction efficiently with BMPs. To achieve this, the best parameters related with runoff and sediment modules of the HRSM4BMP model should be identified with proper calibration processes. Although manual calibration is often utilized in calibrating runoff and sediment using the HRSM4BMP, objective calibration method would be recommended. The purpose of the study was to develop an automatic calibration tool of the HRSM4BMP model with PARASOL method. This automatic calibration tool was applied to Bangdongri, Chuncheon-si to evaluate its calibration performance. The $R^2$, NSE and RMSE value for runoff estimation were 0.92, 0.92, $0.3m^3$, and for sediment yield estimation were 0.94, 0.94, 0.0027 kg. As shown in this result, automatic calibration tool of HRSM4BMP model would be used to determine the best parameters and can be used to simulate runoff and sediment yield with acceptable accuracies.

• 한국농공학회논문집
• /
• 제60권4호
• /
• pp.123-132
• /
• 2018

The purpose of this study was to evaluate the reduction effect of non point source (NPS) pollution in Haean highland agricultural catchment ($62.8km^2$) for 13 BMP scenarios under RCP (Representative Concentration Pathway) 4.5 and 8.5 scenarios. Under the present climate condition, the BMP (best management practices) reduction efficiency of SS (suspended solid), T-N (total nitrogen), and T-P (total phosphorus) showed +25.7%, +4.2%, and +16.1% for VFS (vegetative filter strip), +0.1%, +15.6%, and +5.7% for FC (fertilizer control), and +6.3%, -2.9%, and +3.9% for RSM (rice straw mulching) respectively. In general, effective was the best for SS and T-P reductions, and the FC was the best for T-N reduction. The negative effect of T-N on RSM was induced by increase in infiltration and solute transport to baseflow. Under the future climate change scenarios, the SS, T-N, and T-P reduction efficiency showed the range of +1.9~+11.6%, -1.9~+0.2%, and +5.3~+11.9% respectively. The 3 BMPs (VFS, FC, and RSM) application in the future showed negative and little differences (-0.5~+1.6%) for SS and T-N reduction efficiencies while T-P reduction efficiency showed +0.3~+7.6% comparing with the baseline period. To achieve an increase in the reduction efficiency of future SS and T-N by +2~+10%, the combined application of more than two BMPs is necessary.

• 대한산업공학회지
• /
• 제38권2호
• /
• pp.80-88
• /
• 2012

This paper focuses on small touch key size and spacing that affect the usability of the smart phones. The experiments examined thirty-six different touch key designs, combinations of four touch key sizes (width (mm) ${\times}$height (mm); $4{\times}4$, $4{\times}7$, $7{\times}4$, and $7{\times}7$), and nine spacings (horizontal (mm)${\times}$vertical (mm); $0{\times}0$, $0{\times}1$, $0{\times}3$, $1{\times}0$, $1{\times}1$, $1{\times}3$, $3{\times}0$, $3{\times}1$, and $3{\times}3$). Forty participants volunteered in the experiment. The completion time, error rate, identification discomfort, and control discomfort were measured. The results revealed that the touch key sizes of $7{\times}7$ and $7{\times}4$ provide the best performance in terms of the error rate measure, while the touch key size of $7{\times}7$ provides the best results for other measures. In addition, touch key spacings of $1{\times}1$, $1{\times}3$ and $3{\times}1$ are regarded as the best for all the measures. The results of this study suggest a practical approach for the small touch key design for the smart phones.

• 한국건설관리학회논문집
• /
• 제11권2호
• /
• pp.124-136
• /
• 2010

2000년 이후 국제적 건설시장의 이례적인 침체기가 지속됨에 따라 글로벌 무한경쟁체제 속에 국가경쟁력을 확보하기 위해서는 독보적인 기술력 보유와 더불어 선진화된 건설관리기법의 도입이 절실하게 요구되는 시점이다. 반면 국내 공공공사 입 낙찰제도는 1951년 최저가낙찰제 도입을 시작으로 그 동안 제도 개선이란 명분아래 수차례의 개정을 거듭해 왔지만 그때마다 정책적 이슈와 기대감에 빗대어 괄목할만한 성과를 가져다주지 못했음이 현실이다. 본 연구에서는 2007년 10월 도입이 결정된 최고가치 낙찰제도의 성공적인 국내정착 및 시행의 활성화를 위해 유럽, 미국, 일본 등 선진국의 성공사례를 분석하여 국내실정에 적합한 입찰자 평가체계를 구축하였고 실제 평가에서 활용이 용이한 평가 Tool을 고안하여 제시하였다. 본 연구는 선진국의 동일제도와 국내 유사제도 분석을 토대로 평가요소를 정립하였기에 제시되는 결과물들이 다소 일반적인 건설공사에 국한되는 한계점을 가지며 향후 본 연구에서 보다 발전하여 해당 사업유형에 적합한 특성화된 평가기준의 정립이 필요할 것으로 사료된다.

• Journal of Preventive Medicine and Public Health
• /
• 제29권2호
• /
• pp.215-225
• /
• 1996

Decentralization to local governments and amending of Health Center Law are to promote the efforts of health planning at the level of local agencies. In the health facility planning, it is important to take into account that what to be built, where to be located, how far should be service area and so forth, because health facilities are immovable, and require capital as well as personnel and consumable supplies. The aim of our study, answering to the question of 'where to be located?', is to determine the best location of urban health sub-center. At the local level, planning is the matter of finding the best location of specific facilitiy, in relation to population needs. We confine the accessibility, which is basic to location planning, to geographic one. Location-Allocation Model is used to solve the problem where the location is to maximize geographic accessibility. To minimize the weighted travel distance, objective function, $R_k=\sum{\sum}a_{ij}w_{i}d_{ij}$ is used. Distances are measured indirectly by map measure-meter with 1:25,000 Suwon map, and each potential sites, 10 administrative Dongs in Kwonson Gu, Suwon, are weighted by each number of households, total population, maternal age group, child age group, old age group, Relief for the livelihood, and population/primary health clinics. We find that Kuwoon-Dong, Seodun-Dong, Seryu3-Dong, according the descending orders, are best sites which can minimize the weighted distance, and conclude that it is reasonable to determine the location of urban health sub-center among those sites.

• 한국환경농학회지
• /
• 제33권2호
• /
• pp.144-147
• /
• 2014

BACKGROUND: It is essential to prioritize the exact and clear understanding of agricultural nonpoint source pollution (NPS) controls. The realistic policies and systems should also be developed based on this understanding. Therefore, this study aimed to present agricultural Best Management Practices (BMPs) applicable for the fields based on the Delphi survey result. METHODS AND RESULTS: This study deduced the evaluation items to assess each BMP for agricultural NPS control and conducted the surveying using the Delphi method based on agricultural BMP experts. In addition, its on-the-spot application were evaluated. Considering its importance, technical, social and economic proprieties showed that political support was ranked first and followed by cost investment, labor investment, reduction effect and resident participation. The survey findings by agricultural BMP experts showed the good performance of on-the-spot application can be achieved from fertilization by soil testing, residue and green manure application and contour plowing which are applicable within a field. Agricultural BMPs, highly applicable for the fields, were the countermeasures that farmers who are the principal bodies of agricultural NPS control could be participated directly. CONCLUSION: The active participation of farmers is essential for effective control of agricultural NPS. It is necessary to establish various incentive systems.

• Environmental Engineering Research
• /
• 제15권4호
• /
• pp.215-223
• /
• 2010

This study attempted to develop and suggest a more appropriate method for the determination of event mean concentration (EMC) and pollutant removal efficiency of a stormwater best management practice (BMP) considering rainfall. The stormwater runoff and hydrologic data gathered from 22 storm events during a 28-month monitoring period on a swirl and filtration type of BMP were used to evaluate the developed methods. Based on the findings, the modified EMC method resulted in lower (average) values than the overall EMC, although the differences were not significant (P>0.05). By comparison, the developed 'Rainfall Occurrence Ratio' (ROR) method was most significantly correlated (r=0.967 to 988, P<0.009) with the other existing removal efficiency determination methods such as the 'Efficiency Ratio' (ER), 'Summation of Loads' (SOL) and 'Regression of Loads' (ROL) methods. In addition, the ROR method gave the highest efficiency values, with no significant differences with any of the pollutant parameters, unlike the other three methods. These results were obtained because the ROR method integrated both pollutant loading and rainfall, which are not considered by the other three methods. Therefore, this study proved the suitability of the modified EMC and ROR methods for application in other BMP monitoring studies.