• Fibers and Polymers
• /
• v.2 no.4
• /
• pp.184-189
• /
• 2001

Continuous photografting/crosslinking of polyethyleneglycol dimethacrylate oligomers onto cotton using a water-soluble benzophenone photoinitiator was investigated. Photografting increased with increasing irradiation dose, oligomer concentration and photoinitiator concentration. Maximum grafting efficiency of DM 400 and 600 were 83% and 79%, respectively. the photografting increased the wrinkle resistance of cotton implying surface crosslinking of cotton. bothsurface crosslinking and bulk crosslinking of cotton were accomplished via dual curing of a mixed formulation containing both a thermally curable component (BTCCA/SHP) and a UV-curable component. The wrinkle resistance of the crosslinked cotton was found to be higher when cured by thermal curing due to the facile post-polymerization of the UV active component. The presence of crosslinks in the dually crosslinked cotton was verified with FT-IR and thermogravimetric analysis.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.43-52
• /
• 2006

Three t-amines, 4-(dimethylamino)benzoic acid (ABA), 4-(dimethylamino)benzaldehyde (MBA), 4-(dimethylamino)benzophenone (MBP), were investigated as new visible light photoinitiators for a dental resin composite of UDMA in order to improve photopolymerization effect. Three t-amines mixed with three photosensiizers, CQ, PD and DA, respectively. And the photopolymerization effect of photoinitiators were compared with that of 4-(dimethylamino)ethyl methacrylate (AEM), the most widely used photoinitiator. The photopolymerization efficiency of UDMA containing the photoinitiator increased with irradiation time. The increase was in the order: MBP

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.384-392
• /
• 2004

The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.

• Macromolecular Research
• /
• v.9 no.5
• /
• pp.253-258
• /
• 2001

Crosslinked poly(ethylene glycol)s (PEGs) were prepared by ultraviolet irradiation of low molar mass, liquid PEGs in the presence of benzophenone (BP) as a photoinitiator. The networks obtained have been characterized by DSC, IR, and contact angle measurements, and their water absorption and equilibrium swelling have been examined. The percent of gel formed and degree of swelling of the networks in water were dependent on the amount of BP in the reaction mixture, irradiation time and molar mass of PEG. Gel fraction yield exceeded 84%, and equilibrium swelling in water varied from 49 to 244%.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.1-7
• /
• 2008

Methacryloxypropyl trimethoxysilane (MAPTMS), a hybrid organic-inorganic monomer, was photografted onto PET fabric using benzophenone (BP) as a photoinitiator. It was found that a UV energy of 43.2J/$cm^2$ was required to optimally photograft the MAPTMS onto PET fabrics which was applied with an aqueous formulation of 10% MAPTMS, 20% BP and 0.5% N-Methyldiethanol amine (MDEA). The MDEA additive was efficient in reducing atmospheric oxygen inhibition of polymer radicals which eliminated compulsory nitrogen inerting. The surface grafting of PET fabrics was verified by fourier transform infrared spectroscopy (FT-IR) and scanning electron spectroscopy (SEM). The grafted PET fabrics with the hybrid monomer showed higher thermal stability due to the introduced silane component in the monomer as ascertained by higher char content at 800$^{\circ}C$, which increased to 14.5% for the 15.8% grafting compared to 8.2% for the untreated.

• Rapid Communication in Photoscience
• /
• v.4 no.1
• /
• pp.12-15
• /
• 2015

Intramolecular photocycloaddition of ferulic acid derivatives proceeded in high yields to give head-to-head intramolecular photodimers as three atropisomers. The photocycloaddition was sensitized by triplet sensitizers such as benzophenone, whereas photocycloreversion was promoted by 9,10-dicyanoanthracene (DCA) as an electron-transfer photocatalyst. On the other hand, intermolecular photocycloaddition afforded a head-to-tail photodimer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.34-35
• /
• 2016

Most of the construction adhesive may contain harmful component to the human body with an organic adhesive. In addition, when the adhesive caused hydroquinone, alkyl benzophenone, etc, also it raises the skin diseases to workers. Therefore, the inorganic adhesive development is necessary. This study was a study to know adhesive strength properties that adhesive using a magnesium oxide according to the addition ratio of the retarder. It has experiments to two types of magnesium oxide and type and ratio of retarder differently.

• Journal of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.520-524
• /
• 1976

A model compound for pyrimidine bases, N-methyllutidone, was irradiated with benzophenone in acetonitrile at 313 nm. Three of the four photoproducts were isolated by column chromatography and characterized. N-(Benzhydrylmethyl) lutidone, lutidone, and N-(4-benzoylbenzyl) lutidone were formed with quantum yields of $5.07{\times}10^{-3},\;1.84{\times}10^{-3},\;and\;1.43{\times}10^{-3}$ respectively.

• Korean Journal of Pharmacognosy
• /
• v.31 no.4
• /
• pp.459-461
• /
• 2000

From the n-hexane layer of the MeOH extract of the roots of Polygala tenuifolia, three compounds (2-hydroxy-4,6-dimethoxy benzophenone, 3,4,5-trimethoxycinnamic acid ethyl ester and 1,2,3,6,7- pentamethoxyxanthone) were isolated. 2-Hydroxy-4,6-dimethoxybenzophenone and 3,4,5-trimethoxycinnamic acid ethyl ester were first isolated from Polygala genus. Their structures were elucidated employing 2D-NMR, IR, UV, and MS techniques.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.4
• /
• pp.193-202
• /
• 2009

In the preparation of anion charged asymmetric ultrafiltration membranes by the conventional phase inversion method, several variables could be adjusted to control membrane permeations. The anion charged materials and its original polymer have good solubility in N-methyl-2-pyrrolidone. The membranes having a hydrophilic property were less fouled the membrane prepared from the original polymer. The preparation conditions, operation conditions, and hydrophilicity of polymer have played an important role in determining the permeation properties of membranes.