• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• Journal of Ship and Ocean Technology
• /
• 제3권3호
• /
• pp.1-12
• /
• 1999

Spectral fatigue damage calculations has been performed on four ships in order to assess the effect that the probabilistic modeling of sea states has on the estimated fatigue life. The damage estimation method is based on the Miner- Palmgren fatigue damage formulation and a spectral approach is used to determine the necessary variances of the stress processes. Both the horizontal and vertical hull girder bending induced stress process together with the local water pressure induced stress process is taken into account. The wave scatter diagrams are applied in the calculations and their fatigue severity is assessed by analyzing the results obtained with the ten scatter diagrams and the four ships. All four ships are analyzed both in full load and ballast conditions and while traveling at both full and reduced speed. It is found that the fatigue severity of a wave scatter diagram is dependent on several parameters, some of these being the extreme wave hight extrapolated from the scatter diagram and the mean zero up-crossing period in conjunction with the ship length . Based on these three parameters and expression is derived in order to calculate one single number describing the fatigue severity of a scatter diagram with respect to a certain ship.

• 한국음향학회지
• /
• 제19권5호
• /
• pp.35-40
• /
• 2000

본 연구에서는 먼저 압전형 쇄석기에 의한 충격파 조사시에 발생하는 파쇄대상물의 진동과 그 때 들려오는 방사음과의 관계에 대하여 검토한다. 다음에 대상물에 있어서의 초점위치와 고유진동과의 관계에 대해서도 조사한 결과를 제시한다. 아울러 동일한 실험을 파쇄가능한 대상물에 시행하여 대상물의 진동과 그 파쇄효율과의 관계에 대해서도 실험적으로 검토한다. 그 결과, 초점위치에 따른 대상물 고유진동의 피크 주파수 파워와 파쇄효율과의 상관성을 명확히 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1480-1487
• /
• 2005

Metal matrix composites(MMCs) have been rapidly becoming one of the strongest candidates for structural materials fur many high temperature application. However, among the various high temperature environments in which metal matrix composites was applied, thermal shock is known to cause significant degradation in most MMC system. Due to the appreciable difference in coefficient of thermal expansion(CTE) between reinforcement and metal matrix, internal stresses are generated following temperature changes. Infernal stresses affect degradation of mechanical properties of MMC by causing microscopic damage in interface and matrix during thermal cycling. Therefore, the nondestructive evaluation on thermal shock damage behavior of SiC/A16061 composite has been carried out using ultrasonics. For this study, SiC fiber reinforced metal matrix composite specimens fabricated by a squeeze casting technique were thermally cycled in the temperature range 298$\~$673 K up to 1000cyc1es. Three point bending test was conducted to investigate the efffct of thermal shock damage on mechanical properties. The relationship between thermal shock damage behavior and the propagation characteristics of surface wave and SH-ultrasonic wave was discussed by considering the result of SEM observation of fracture surface.

• 한국항해학회지
• /
• 제24권1호
• /
• pp.85-95
• /
• 2000

In the country where the population concentrates in the metropolis with the narrow land, development of the ocean space is necessary. Recently, mega-float offshore structure has been studied as one of the effective utilization of the ocean space. And very large floating structures are now being considered for various applications such as floating airports, offshore cities and so on. This very large structure is relatively flexible compared with real floating structures like large ships. when we estimate dynamic responses of these structures in waves, the elastic deformation is important, because vertical dimension is small compared with horizontal. And it is necessary to examine the effect of ocean wave external force received from the natural environment. In this study, the mat-type large floating structure is made to be analytical model. And the analysis of the dynamic response as it receives regular wave is studied. The finite element method is used in the analysis of structural section of this model. And the analysis is carried out using the boundary element method in the fluid division. The validity of analysis method is verified in comparison with the experimental result in the Japan Ministry of Transport Ship Research Institution. In order to know the characteristics of the dynamic response of the large floating structures, effects of wavelength, bending rigidity of the structure, water depth, and wave direction on dynamic response of the floating structure are studied by use of numerical calculation.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.397-405
• /
• 2022

The existing researches on the dynamics of the fluid-conveying pipes only focus on stability and vibration problems, and there is no literature report on the wave propagation of the fluid-conveying pipes. Therefore, the purpose of this paper is to explore the propagation characteristics of longitudinal and flexural waves in the fluid-conveying pipes. First, it is assumed that the material properties of the fluid-conveying pipes vary based on a power function of the thickness. In addition, it is assumed that the material properties of both the fluid and the pipes are closely depended on temperature. Using the Euler-Bernoulli beam equation and based on the linear theory, the motion equations considering the thermal-mechanical-fluid coupling is derived. Then, the exact expressions of phase velocity and group velocity of longitudinal waves and bending waves in the fluid-conveying pipes are obtained by using the eigenvalue method. In addition, we also studied the free vibration frequency characteristics of the fluid-conveying pipes. In the numerical analysis, we successively studied the influence of temperature, functional gradient index and liquid velocity on the wave propagation and vibration problems. It is found that the temperature and functional gradient exponent decrease the phase and group velocities, on the contrary, the liquid flow velocity increases the phase and group velocities. However, for vibration problems, temperature, functional gradient exponent parameter, and fluid velocity all reduce the natural frequency.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.103-112
• /
• 1992

선박의 최종굽힘 모멘트는 설계에 적용되는 주요강도로써 이를 추정하는 여러방법들이 제안되었는데, 판과 보강재로 이루어진 구조요소의 압축 최종강도에 대한 추징에서 시작되는 것이 일반적이다. 본 논문에서는 최종굽힘 모멘트를 구하기 위해 보강판의 압축 강도추정을 지금까지 제안된 여러가지 방법을 정리하여 소개하고, 실선 설계에 적용될 수 있는 유용성 측면에서 검토하였다. 그 결과를 이용하여 3척의 살물선에 대한 신뢰성 해석을 수행하였다. 선박에 작용하는 파랑굽힘 모멘트는 선급규정에 의해 계산하였다. 본 연구의 신뢰성 해석 문제는 안전여유식의 형태가 비선형임을 고려하여 Advanced First-Order Reliability Method를 이용하였다. 몇가지의 해석예로부터 선체구조의 신뢰성 검토측면에서 최종강도 추정방법을 비교하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.84-91
• /
• 2003

본 연구에서는 3 수종(이태리 포플러, 소나무, 굴참나무재)을 공차별(0, 0.15, 0.3, 0.45 mm)로 초산비닐 수지와 레소시놀-페놀 공축합 수지를 이용하여 접합 제작하였다. 휨시험에서 핑거공차에 따라서 검출되는 AE와 휨강도성능 특성을 살펴본 결과는 다음과 같았다. 레소시놀재의 AE파 발생시기가 초산재보다 빨랐으며, 레소시놀재의 AE파 사상총수는 하중의 증가와 함께 계속적으로 증가하였으며 총발생 사상총수도 초산재보다 휠씬 많이 나타났다. 또한, 레소시놀재의 AE파 사상총수는 낮은 하중에서도 많은 개수가 발생하였다. 비례한도 내에서도 레소시놀 접착제를 사용한 경우에는 많은 AE파가 검출되었다. 따라서 레소시놀 접착제로 접착한 핑거 접합재의 휨시험으로부터 얻은 AE 신호는 핑거공차에 따른 접합재의 강도 예측이나 보증에 이용 가능할 것으로 판단되었다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권1호
• /
• pp.1-14
• /
• 2017

The safety analysis of an earthquake is carried out during the operation of a subsea pipeline and an onshore pipeline. Several cases are proposed for consideration. In the case of a buried pipeline, permanent ground deformation by the earthquake and an increase of internal pressure by the acceleration of the earthquake should be considered. In the case of a subsea pipeline, a bending moment is caused by liquefaction of the backfill material on a trenched seabed, etc., which results in a high bending moment of the buried pipeline. The bending moment causes the collapse of the subsea pipeline or a leak of crude oil or gas, which results in economic loss due to enormous environmental contamination and social economic loss owing to operation functional failure. Thus, in order to prevent economic loss and operation loss, structurally sensitive design with regard to seismic characteristics must be performed in the buried pipeline in advance, and the negative impact on the buried pipeline must be minimized by conducting a thorough analysis on the seabed and backfilling material selection. Moreover, it is proposed to consider the selection of material properties for the buried pipeline. A more economical review is also required for detailed study.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.491-501
• /
• 2020

Microtubules buckle under bending and torsion and this property has been studied for free microtubules before using orthotropic elastic shell model. But as microtubules are embedded in other elastic filaments and it is experimentally showed that these elastic filaments affect the critical buckling moment and critical buckling torque of the microtubules. To prove that, we developed orthotropic Winkler like model and demonstrated that the critical buckling moment and critical buckling torque of the microtubules are orders of higher magnitude than those found for free microtubules. Our results show that Critical buckling moment is about 6.04 nNnm for which the corresponding curvature is about θ = 1.33 rad /㎛ for embedded MTs, and critical buckling torque is 0.9 nNnm for the angle of 1.33 rad/㎛. Our results well proved the experimental findings.