• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.72-79
• /
• 2021

본 연구에서는 신개념 항공교통수단으로 활용될 자율비행 개인항공기 개발의 일환으로 자율비행 개인항공기 주익조립체의 등가모델을 생성한 후 고유모드 해석을 통해 생성된 등가모델의 신뢰성을 검증하였다. 주익조립체는 주익, 안쪽파드, 바깥쪽 파드로 구성되어 있다. 먼저, 각 부품의 등가모델을 생성하기 위해서 해당 부품을 몇 개의 구역으로 분할하고, 각 구역의 양 끝단에 등가모델 축상에 놓이는 절점들을 생성하였다. 그리고, 단위하중과 단위모멘트을 부과한 정적해석을 통해 변형량 또는 회전량을 계산하고, 빔 이론식을 적용하여 각 부품들의 등가 축강성, 굽힘강성, 비틀림강성을 계산하였다. 그리고, 각 구역 중앙에 집중질량을 생성하여 질량과 관성모멘트 정보를 입력하고, 빔 요소를 사용하여 등가모델을 생성하였다. 최종적으로 상세모델의 모드해석 결과와의 비교를 통해 생성된 등가모델의 신뢰성을 확인하였다.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.65-70
• /
• 2020

Partial reinforcement of sheet metal parts with CFRP patch is a technology that can realize ultra-lightweight body parts while overcoming the high material cost of carbon fiber. Performing these patchworks with highly productive press equipment solves another issue of CFRP: high process costs. The A-pillar is the main body part and has an undercut shape for fastening with other parts such as roof panels and doors. Therefore, it is difficult to bond CFRP patches to the A-pillar with a general press forming tool. In this paper, a flexible system that applies uniform pressure to complex shapes using ceramic particles and silicone rubber is proposed. By benchmarking various A-pillars, a reference model with an undercut shape was designed, and the system was configured to realize a uniform pressure distribution in the model. The ceramic spherical particles failed to realize the uniform distribution of high pressure due to their high hardness and point contact characteristics, which caused damage to the CFRP patch. Compression equipment made of silicone rubber was able to achieve the required pressure level for curing the epoxy. Non-adhesion defects between the metal and the CFRP patch were confirmed in the area where the bending deformation occurred. This defect could be eliminated by optimizing the process conditions suitable for the newly developed flexible system.

• Advances in concrete construction
• /
• 제14권1호
• /
• pp.45-55
• /
• 2022

In this article, the flexural and shear capacity of ultra-high-performance fiber-reinforced concrete beams (UHPFRC) using two kinds of rebars, including GFRP and steel rebars, are experimentally investigated. For this purpose, six UHPFRC beams (250 × 300 × 1650 mm) with three reinforcement ratios (ρ) of 0.64, 1.05, and 1.45 were constructed using 2% steel fibers by volume. Half of the specimens were made of UHPFRC reinforced with GFRP rebars, while the other half were reinforced with conventional steel rebars. All specimens were tested to failure in four-point bending. Both the load-deformation at mid-span and the failure pattern were studied. The results showed that utilizing GFRP bars increases the flexural strength of UHPFRC beams in comparison to those made of steel bars, but at the same time, it reduces the post-cracking strain hardening. Furthermore, by increasing the percentage of longitudinal bars, both the post-cracking strain hardening and load-bearing capacity increase. Comparing the experiment results with some of the available equations and provisions cited in the valid design codes reveals that some of the equations to predict the flexural strength of UHPFRC beams reinforced with conventional steel and GFRP bars are reasonably conservative, while Khalil and Tayfur model is un-conservative. This issue makes it essential to modify the presented equations in this research for predicting the flexural strength of UHPFRC beams using GFRP bars.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• Geomechanics and Engineering
• /
• 제29권1호
• /
• pp.25-40
• /
• 2022

In this study, 3D coupled-consolidation numerical parametric study was conducted to predict the deformation mechanism of a 20 storey building sitting on (4×4) piled raft (with length of piles, L_p=30 m) to adjacent 6 m diameter (D) tunnelling in stiff clay. The influences of different tunnel locations relative to piles (i.e., z_t/L_p) were investigated in this parametric study. In first case, the tunnel was excavated near the pile shafts with depth of tunnel axis (z_t) of 9 m (i.e., z_t/L_p). In second and third cases, tunnels were driven at z_t of 30 m and 42 m (i.e., z_t/L_p = 1.0 and 1.4), respectively. An advanced hypoplastic clay model (which is capable of taking small-strain stiffness in account) was adopted to capture soil behaviour. The computed results revealed that tunnelling activity adjacent to a building resting on piled raft caused significant settlement, differential settlement, lateral deflection, angular distortion in the building. In addition, substantial bending moment, shear forces and changes in axial load distribution along pile length were induced. The findings from the parametric study revealed that the building and pile responses significantly influenced by tunnel location relative to pile.

• Steel and Composite Structures
• /
• 제44권6호
• /
• pp.845-865
• /
• 2022

In this study, the performance of shear deficient reinforced concrete (RC) beams with rectangular cross-sections, which were externally bonded reinforced (EBR) with high strength CFRP and GFRP strips composite along shear spans, has been experimentally and analytically investigated under vertical load. In the study, the minimum CFRP and GFRP strips width over spacing were considered. The shear beam with turned end to a bending beam was investigated by applying different composite strips. Therefore various arising in each of strength, ductility, rigidity, and energy dissipation capacity were obtained. A total of 12 small-scaled experimental programs have been performed. Beam dimensions have been taken as 100×150×1000 mm. Four beams have been tested as unstrengthened samples. This paper focuses on the effect of minimum CFRP and GFRP strip width on behaviours of RC beams shear-strengthened with full-wrapping, U-wrapping, and U-wrapping+longitudinal bonding strips. Strengthened beams showed significant increments for flexural ductility, energy dissipation, and inelastic performance. The full wrapping strips applied against shear failure have increased the load-carrying capacity of samples 53%-63% interval rate. Although full wrapping is the best strengthening choice, the U-wrapping and U-wrapping+longitudinal strips of both CFRP and GFRP bonding increased the shear capacity by 53%~75% compared to the S2 sample. In terms of ductility, the best result has been obtained by the type of strengthening where the S5 beam was completely GFRP wrapped. The experimental results were also compared with the analytically given by ACI440.2R-17, TBEC-2019 and FIB-2001. Especially in U-wrapped beams, the estimation of FIB was determined to be 81%. The estimates of the other codes are far from meeting the experimental results; therefore, essential improvements should be applied to the codes, especially regarding CFRP and GFRP deformation and approaches for longitudinal strip connections. According to the test results, it is suggested that GFRP, which is at least as effective but cheaper than CFRP, may be preferred for strengthening applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.369-372
• /
• 2021

요즘 시대에는 사람들이 학업이나 일 때문에 앉아있는 시간이 많아지고 있다. 또한 휴식 시간에도 사람들이 컴퓨터, 스마트폰, 태블릿 PC를 많이 사용하므로 자세가 더 나빠지고 있다. 장시간 동안 이러한 자세를 유지하면 목, 어깨, 척추와 관련된 근골격계에 문제가 발생한다. 또한 육체 피로와 자세 변형 등의 문제는 다양한 연령대로 확대될 것으로 추정된다. 따라서 본 연구에서 개발 중인 시스템의 핵심 기능은 본인의 자세가 올바른지 확인하고 제작된 모바일 애플리케이션을 사용하여 경고 알림을 수신하게 하는 것이다. 이를 위해 휨 센서, 압력 센서, 기울기 센서를 부착하여 활용한다. 휨 센서는 자세의 휘어짐을 감지하여 비교하여 아두이노 우노 보드로 송신한다. 또한 몸의 밸런스, 기울기 등의 정보를 취합하여 지금의 자세가 올바른지 판단한다. 자세가 올바르지 않을 때 경고하는 방법은 모바일 애플리케이션을 통하여 알림을 받으며, 사용자와 보호자의 애플리케이션에 본인의 자세가 올바르지 않는다는 것을 표시한다. 본 연구에서 제안한 시스템을 통하여서 앞으로의 자세관련 연구에 큰 도움이 될것이 기대된다.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.447-455
• /
• 2006

순수변위 비선형 4절점 쉘요소의 정식화를 제안하여 철근 콘크리트, 강재및 복합재료등 범용 목적의 구조물의 해석에 적합하도록 하였다. 기하강성의 정식은 2차 운동역학적 관계를 이용하여 쉘이 중립면에서 정의되었고 이러한 기하강성은 면내응력, 휨 모멘트와 수직 전단력의 형태로 구성되어 두꺼운 판 및 쉘의 해석에 효과적이다. 가정된 자연 변형률 방법을 사용하여 전단잠김 문제를 제거한 복합 쉘 요소는 얇은 판및 쉘의 경우에도 정확한 해를 구할 수 있다. 콘크리트 경우 소성이론 및 탄소성 파괴역학에 근거한 비탄성 해석이 가능하며 강재경우 폰미스의 항복이론과 이바노브의 항복이론을 이용한 소성해석이 가능하다. 복합 재료의 수직전단 강성 행렬은 평형방정식으로부터 유도하여 구성하였다. 본 연구에서 제안한 쉘 요소는 해석 예제들이 참고문헌과 잘 일치하여 정확성이 입증되었으며 범용목적의 박판구조 해석에 적합한 것으로 사료 되었다.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.484-492
• /
• 2023

본 연구에서는 전기화학적 염화물 추출(ECE) 완료된 RC 보의 구조적 거동을 기존에 주로 사용되었던 부착 강도 측정이 아닌 3점 재하 시험을 통해 분석했다. 그 결과, ECE 처리에 의해 콘크리트 보의 휨 강성은 저하되었으나, 최대하중 측면에서 강도는 향상되는 것으로 나타났다. 또한, ECE에 의해 인장 변형률이 증가하여 인장 균열에 대한 저항성은 향상되었으며, 관성 모멘트 감소율은 감소하였다. 이러한 구조적 거동 측면의 이점에도 불구하고 연성 및 휨 강성은 저하되었다. 콘크리트보의 휨 강성은 선형 탄성 범위에서 유효 단면적의 손실로 인해 감소됐고, 실제로 인장변형에 의해 파손된 상태에서 단면 2차 모멘트는 약 70 %의 손실되었다. 그러나 이러한 단면 손실에 의한 관성 모멘트 감소율은 ECE에 의해 더 낮아졌는데, 이는 균열에 대한 저항성이 증가되는 반면, 변형량이 증가되어 사용성 측면에서의 위험성은 더 증가됨을 의미한다.