• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.473-478
• /
• 2009

The purpose of this study is to evaluate the behaviour of the plastic deformed zone at crack tip on the standard Charpy specimens which were taken from the multi-passed weld block of the pressure vessel steel. Notch was machined on the standard Charpy test specimens and pre-crack which was located around the fusion line was made under the repeat load. Four point bend and acoustic emission tests were carried out simultaneously. The size of plastic region at crack tip was calculated using stress intensity factor. Relationships between characteristics of acoustic emission and plastic zone size at crack tip were discussed through the cumulative AE energy. Regardless of the specimens, AE signals were absent within the elastic region almost and most of AE signals were produced at the plastic deformation region from yield point to the mid-point between yield and maximum load. More AE signals for the weldment were produced compared with the base-metal and PWHT specimen. Relations between plastic deformed zones at crack tip and cumulative AE energy for the weldment and PWHT specimen were different quietly from the base-metal. Besides, number of AE counts for the weldment was the larger than those of the base-metal and PWHT specimen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3833-3838
• /
• 2009

This paper introduces a measurement system for mechanical properties of sport shoes using an industrial robot. The robot system used in this paper is a commercial Puma type robot system(FARA AT2 made by SAMSUNG Electronics) with 6 joints and the end-effector is modified to produce a human walking motion. After analyzing human walking with a high speed video camera, each joint angle of the robot system is extracted to be used in the robot system. By using this system, ground impact forces were measured during stepping motion with 3 different shoe specimens made of 3 different hardness outsoles, respectively. As other mechanical properties, both bending moments to bend the toe part of the same specimen shoes and pronation quantities during walking motion were measured as well. In the impact test with the same depth of deformation under the ground level, the effect of the outsole hardness was clearly appeared such that the harder outsole produces the higher ground reaction force. The bending test and the pronation test also show proportional increments in the bending stiffness and the moment Mx according to the outsole hardness. Throughout such experiments, the robot system has produced consistent results so that the system could be used in obtaining valuable informations for a shoe designing process.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.471-475
• /
• 2006

The summary of a study of efficacy of Rose essential oil and Lavender essential oil against skin-inflammation caused to surfactant is as follows. As a result of protein analysis, although Rose essential oil and Lavender essential oil stimulates skin, there is no much alteration of protein. The alteration of protein's bend to be under part of 43Kd is appeared in the group treated Rose essential oil and Lavender essential oil. The stratum of the group treated by surfactant is more, the stratum of the group treated by surfactant is more thick. As the observed result of alteration of basal layer, it is seen that the group treated Rose essential oil and Lavender essential oil takes the shape of cell layer constant, and the group treated Rose essential oil is made the basal cell layer of normal structure than that of Lavender essential oil. As the observed result of alteration of Mast cell group treated by Rose essential oil and Lavender essential oil for 3 weeks Luna's stain(${\times}20$), (${\times}100$), it is observed that the damaged group treated by Lavender essential oil is numerous in alteration of mast cell's number, and Mast cell's size is larger than the damaged group.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.111-115
• /
• 2006

Jinbudlsongyi mushroom (Agrocybe aegerita) was bred in Mushroom Research Institute, Gyonggi Province A.R.E.S in 2005. It was bred with mating between moookarytic strains isolated from Budlsongyi#1 and KME45202. The temperature of optimal mycelial growth was $24{\sim}26^{\circ}C$ on PDA and $18{\sim}20^{\circ}C$ in sawdust medium. To harvest fruiting body of Jiobudlsoogyi the period required for colonization after inoculation was 37days and the period of cultivation was 13days after scratching of inoculum. The major characteristics of the mushroom was shown a lot of primordia, light brown colored stipe and convex-shaped pileus. Compared with Budlsongyi#1, it was shown dark brown-colored pileus and straight stipe. The fruiting body yield was $115g{\pm}6/850cc$ bottle. It was demanded proper circulation at the time of primordia and put it around with cloth that is prevented to be bend the stipes.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.529-535
• /
• 2011

In this study, evaluation of acoustic emission signals characteristics for the post weld heat treated (PWHT) multi-pass weldment and weldment was dealt. Charpy standard specimens were taken from the lowest, middle and highest regions of the weld block. Pre-crack was made using the repeated load. Four point bend and AE tests were conducted simultaneously. Regardless of the specimens, AE signals were absent within elastic region and produced in the process of plastic deformation. AE signals for all specimens were not emitted after the maximum load. Value of signal strength for the all PWHT specimens was lower than that of the weldment. Besides, relations of plastic deformation zone size and accumulated AE counts for the PWHT specimens were more simple compared with the weldment. In case of the PWHT specimen, particles on the fractured surface decreased prominently compared with the weldment due.to PWHT. From these results, it can be concluded that PWHT was effective in reducing the AE sources for the weldment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.352-360
• /
• 2018

The purpose of this study was to examine the level of human rights sensitivity and the types of perception in regards to the human rights of college students to enhance their human rights sensitivity. The study methodology included a t-test and variance analysis for the level of human rights sensitivity, and a Q-factor analysis for the perception types of human rights. As a result of examining whether there is a difference in human right sensitivity, it was found that female students were higher than male students, and juniors and seniors were higher than freshmen and sophomores. The human rights sensitivity of the students in the social and science department were the highest, and those who had volunteer experiences were more susceptible to human rights than those who did not. Students who registered for organ donation were higher than those who did not, and those who received human rights education showed higher human rights susceptibility than those who did not. Four perception types of human rights were analyzed 'universal social moralists', those who have an idealistic mindset and make decisions based on moral standards, 'practical realists', those who have no intention of breaking out of the social norm and who do not want to take any risks for human rights, 'social system advocates', those who have a clear understanding of the basic human rights concept, but don't think that they should break the rules of society for the sake of individual rights, and 'social contracts advocates', those who are willing to bend the rules of society for human rights, but not to the extent of ruining relationships. These study results are expected to contribute to the possibility of the social viewpoint that human rights sensitivity can be developed in the context of social experience as well as perception.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.503-507
• /
• 2007

In this paper, the ultra-widebend, microstrip patch antenna with the bandwidth of 3 GHz was implemented for ultra-wideband(UWB) wireless communication applications. In order to cover the very wide bandwidth of 3 GHz, a multi-resonance antenna was designed, each resonance frequency was separated into five frequency bend, 7.5, 8.1, 8.7, 9.3, and 9.9GHz with the interval of 600MHz BW. And for wideband characteristics of each antenna, U-slot antennas were designed at each center frequency. Designed five U-slot antennas were connected in series for multi-resonance of 3GHz BW and wideband matching was also designed for impedance matching transmission line calculated. The relative dielectric constant, the height, the loss tangent of the PCB substrate were ${\epsilon}_r=4.8,\;h=0.6$ and loss tangent=0.0009 respectively. The implemented antenna's radiation patterns and gain were directivity characteristics and $1.46{\sim}4.08dBi$ at the five separated center frequency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.200-210
• /
• 2017

This Research is focused on ancient battle formation basing on the layout drawing of Yijinchongbang (manuals of learning military formations) in a strategy book in the late Joseon dynasty. The research topic is the principles of organic composition of battle formation and battlefield operating system by reforming the basic model of ancient battle formation. The research method is comparative analysis by reforming the battlefield operating system of types of disposition such as Obangjindisposition(Bangnjin; battle formation, Jikjin; direct battle formation, Gokjin; bend battle formation, Wonjin; round battle formation, and Yejin; keen battle formation), and Hyunmoojindo; turtle battle formation, Paljindo; all-rounder battle formation, Yookhwajindo; six flowers battle formation, Gugunjindo; nine forms battle formation. From the study results, Standoff Bombing of the battle formation in the late Joseon Dynasty basically started out from magic battle formation, but was then transformed into square, rectangle, pentagon, and circle. Also, the battle array composition used a 5-linear structure and was composed of 5 systems of circulation such as rectangle, square, diagonal, curve, and circle. The research findings elucidate the battlefield of the Joseon dynasty by establishing the real battle formation, and thus have military and academic value in suggesting possible tactics that can be used by modern training of military.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.209-221
• /
• 1995

The purpose of this study was to obtain the lingual morphology(angulation, inclination, horizontal and vertical contour) and lingual arch form of Korean adult with normal occlusion in order to provide the basic datas for lingual brackets and ideal lingual archwire. Dental models of thirty person with normal occlusion(Male : 16, Female :14) were selected for this study. Crown angulation, inclination. horizontal and vertical contour of lingual surfaces from Lt. 1st molar to Rt 1st molar of both upper and lower arch were measured. Lingual arcform was studied from copied papers of dental models attached Fujita lingual bracket. The results of this study were summarized as follows: 1. The average angulation and inclination of lingual surfaces of all tooth types for Korean adults with normal occlusion were obtained. 2. The average horizontal and vertical contour of lingual surfaces of all tooth types were obtained. 3. There were similar figures in horizontal and vertical contour of lingual surfaces between upper and lower molars, upper and lower premolars, upper and lower canines, upper central and lateral incisors and lower central and lateeral incisors respectively. It was possible that the use of those contour of bracket bases in common. 4. The average of lingual archform was provided, which was arch-shaped from canine to canine, linear along the premolars and molars with small offset bend between them, and where canines and premolars met, it was bent in a crank- shape. 3. There was no difference between lingual archform of male and that of female, although lingual archform of female was smaller than that of male in lower arch.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.55-61
• /
• 2015

Stretchable electrode materials are focused to apply to flexible device such as e-skin and wearable computer. Used as a flexible electrode, increase in electrical resistance should be minimalized under physical strain as bend, stretch and twist. Carbon black is one of candidates, for it has many advantages of low cost, simple processing, and especially reduction in resistivity with stretching. However electrical conductivity of carbon black is relatively low to be used for electrodes. Instead graphene is one of the promising electronic materials which have great electrical conductivity and flexibility. So it is expected that graphene added carbon black may be proper to be used for stretchable electrode. In this study, under stretching electrical property of graphene added carbon black composite electrode was investigated. Mechanical stretching induced cracks in electrode which means breakage of conductive path. However stretching induced aligned graphene enhanced connectivity of carbon fillers and maintained conductive network. Above all, electronic structure of carbon electrode was changed to conduct electrons effectively under stretching by adding graphene. In conclusion, an addition of graphene gives potential of carbon black composite as a stretchable electrode.