• Membrane and Water Treatment
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2011

A bench-scale test has recently been proposed as a predictive tool to minimize the scope of pilot-scale testing or to optimize the operation of full-scale membrane filtration systems. Consequently, a bench-scale testing unit was developed for this purpose and systematically evaluated in this study. This unit was capable of accommodating commercially available, low pressure, hollow fiber (LPHF) membranes with various configurations for testing under conditions comparable to real-world applications. Reproducibility of this unit in assessing membrane fouling and microbial removal efficiency of LPHF membranes was tested and statistically comparable results were obtained. This unit serves as a useful apparatus for academic researchers and utilities to evaluate the performance of LPHF membranes used for water treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.554-562
• /
• 2004

It was recommended for all ship engaged in international voyages to carry the Satellite Emergency position Indicating Radio Beacon according to Global Maritime Distress ＆ Safety System but also it is tending to be diffused to require the satellite EPIRB installed in small vessel such as a fishery boat by domestic regulations of each countries. Otherwise the domestic regulation can't evaluate exactly the compatibility with the satellite system and the performance of the equipment itself required by international regulation. And even if it is required the performing of the performance inspection in accordance with international regulation, it is difficult to grasp the characteristics of equipment by a generalized measuring equipment. Hence this study performed the measurement for the matters related with an wave forms, modulation characteristics, frequency and the power, etc through the design and implementation of the test bench capable of ensuring most of test items regulated by international regulation. Through this study, it has been paved the way being capable of preparation of the standard regarding to transmission repetition period, phase variation and frequency stability related with the system compatibility and in conclusion, it is enable to improve the performance of a main distress communication equipment directly connected with the life of a survivor.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.423-433
• /
• 2023

As aerial application increasing, with social concerning in pesticide drift rises, so this study attempts to establish a test bench that can repeatedly and continuously evaluate this. To this end, this study first analyze ISO 22866 and ASABE S561.1 among the international standard test methods related to pesticide fugitive evaluation. A test bench was established at the Naju practice field of Chonnam National University in accordance with international standards, and field tests were carried out (ISO 22866, ASABE S561.1) to verify effectiveness. A test bench that established in this study and a pesticide drift recovery protocol by aerial application can improve the experimental environment where field experiments were complex and it was difficult to achieve the same conditions. In addition, it will be possible to construct a database of pesticide drift that takes into account various factors that affect pesticide drift substances, which is expected to improve the reliability of the data, as well as quantitative evaluation of pesticide drift in the air.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.13-13
• /
• 2000

일반적으로 고체추진 로켓 모타의 개발단계 때 공통적으로 수행되는 주시험(main test)으로는 추력, 압력, 회전률 등의 성능측정을 하기 위한 정적연소시험(static firing test), 내부 정수압(hydrostatic pressure)에 의한 폭발 압력 시험, 연소중이나 연소 후 케이스에 대한 굽힘 강성 시험, 이외에 노화 시험, 환경시험 등이 요구된다. 그러나 신궁과 같은 휴대용 대공 시스템의 추진기관 개발의 경우에는 사수를 보호하기 위해 여러 가지 안전장치들이 설계되고, 이러한 장치들의 성능에 대한 요구 조건들을 확인하기 위한 특수시험(specific test)들이 필요하게 된다. 이러한 특수시험을 위한 각종 시험대들을, 위에서 언급한 주시험을 위해 사용되는 정적시험대(static test bench)들과 구분하기 위해 동적 시험대(DTB : Dynamic Test Bench)라고 한다. 본 연구에서는 신궁 추진기관의 사출모타 점화에서 비행모타 점화에 이르는 일련의 비행절차를 확인하기 위한 동적 시험대 설계 및 제작, 계측장치 구성 및 데이터 획득 방법 등에 관한 내용을 소개하며, 동적 시험대에서 수회에 걸쳐 수행된 동적 시험 결과를 분석/정리하였다.

• Tribology and Lubricants
• /
• v.13 no.4
• /
• pp.33-39
• /
• 1997

In order to establish a new temperature criterion to prevent the pistons from ring sticking due to deposit formation, bench test and engine test were performed. The effects of oil degradation and temperature on deposit formation was studied by a modified panel coking test. Oil degradation was analyzed by FTIR. Oil oxidation and nitration were selected as a factors to evaluate oil degradation. Bench test results show that oil oxidation is more effective to the deposit formation than oil nitration. And the temperature increase accelerates deposit formation and deposit formation increase rapidly above 26$0^{\circ}C$. Especially, in case of degraded oil, the deposit formation increases so rapidly that ring sticking can occur. The effect of piston temperature on the deposit formation was confirmed by engine test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.507-513
• /
• 2008

In this paper, we present a development of an Avionics Hot Bench(AHB) used for the verification of operational flight programs and fault analysis using various simulation and stimulation software. We propose an application of the open system architecture to develop the AHB which can be used for the development of a real aircraft avionics system. In the design of the AHB, to reduce the development period and cost we use as many as commercial off-the-shelf hardware and software items. The developed AHB is compared with the existing proven AHB which was used for T-50 avionics system development. Thorough comparison between the test results using the developed AHB and those using the existing AHB is performed and the overall comparison results are very satisfactory.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.75-78
• /
• 2004

Engine power cylinder parts are faced with more severe wear and friction environment. For instance, emission gas recirculation (EGR), one of the most valid technologies related to emission legislation, is known to accelerate wear of piston ring and cylinder liner. Therefore, advanced materials and surface treatments have been developed and adopted successively so that a need exists for an accurate and repeatable friction and wear bench test for various combination of piston ring and cylinder liner that more closely relates to engine test result. This paper introduces accelerative bench wear test method for piston ring and cylinder liner, presents the experimental result of friction and wear properties of piston ring surface treatments that noticed in substitution for hard chrome plating.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.589-600
• /
• 2022

In order to verify the reliability of Dry Test Bench (DTB) used for testing the output energy from ballistic extracorporeal shock wave therapeutic devices, the measurements with DTB were compared with the acoustic energy measured with a Laser Doppler Vibrometer (LDV) for a commercial ballistic ESWT device. It was shown that the mechanical energy detected with DTB had variability maintained within 5 % at the same output power setting and also had a linear correlation (adj. R² = 0.991) with the acoustic energy measured with the LDV for the entire output power settings. Using the correlation between the two methods and the correlation on the acoustic energy measured in between air and water with the LDV, the DTB measurement can be used to estimate the energy flux density in water with an average error of 7.85 % for the entire output power settings of the ballistic shock wave generator considered in the experiment. DTB provides information limited to the output mechanical energy and therefore it is not suitable for testing the various acoustic output parameters required in IEC61846 and IEC63045. However, DTB that is simple in measurement principles and easy to use is expected for manufacturers and clinical users to monitor the performance of ballistic Extracorporeal Shock Wave Therapy (ESWT) devices.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.305-311
• /
• 2002

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. A braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two types of brake with different sizes in stop and hold braking modes. Plasma spray coating technique was also used to coat the discs with ceramic powder. During the test four commercial brake pads were coupled with discs. Ceramic coated discs showed good stability in friction coefficient at high speed and high energy braking conditions. But they caused large wear loss of pad mass compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc. it showed fluctuating friction coefficient at high speed but small wear loss of pad mass compared with ceramic coated discs.