• 자원환경지질
• /
• 제30권4호
• /
• pp.341-352
• /
• 1997

Retention ponds have been dug along some of the motorways in France to minimize environmental pollution by keeping pollutants from spreading over the surrounding area. In order to study heavy metal pollution and diagenetic behaviour of sediments, eight core samples were collected from the bottom of a retention pond located along the A-71 motorway in Sologne. The metal concentrations in interstitial waters and extractable metal concentrations in sediment layers using sequential chemical extraction method were determined. The depth distributions of Pb, Zn and Cd concentrations in interstitial water and particulate sediments were studied, and distribution coefficients (KD) were also determined to investigate the environmental mobility of these elements. In addition. the index of geoaccumulation and the Fe-normalized enrichment factor were calculated to differentiate the natural accumulation from the anthropogenic pollution. The vertical concentration profiles of heavy metals in core sediments indicate that surface enrichments (0~2 cm) of Pb, Zn, Cd and organic carbon were always observed at each core sample, due to the early diagenesis. However, the major factor contributing to the accumulation of Cd at the sediment surface is attributed to the dissolution of Cd from polluted roadside soil during periods of rainstorms and its subsequent redeposition on the sediment surface after being carried to the retention pond. A comparison of the KD values indiactes that a decrease in the KD values for Pb and Zn was observed with depth while KD values for Cd increase. According to the KD values. the relative mobility of studied metals was determined as following: Mn>Zn>Cd>Pb, for the upper layer, and Mn>Cd>Zn>Pb, for the lower layers.

• 한국전산구조공학회논문집
• /
• 제27권2호
• /
• pp.79-86
• /
• 2014

본 논문에서는 범용 유한요소프로그램 ANSYS와 ABAQUS를 이용하여 냉간성형강으로 조립한 조립기둥의 전체좌굴과 뒤틀림좌굴에 대한 비선형해석을 위한 모델링 기법을 소개한다. 냉간성형강의 경우 두께가 얇아서 국부좌굴 등 비선형거동을 보이기 때문에 좌굴에 대한 해석에 매우 섬세한 모델링이 필요하다. ANSYS의 내연적정적모델링에 의한 해석은 좌굴 극한점 부근에서 수렴의 문제를 발생하였지만, ABAQUS의 외연적동적모델링의 경우에는 좌굴 및 좌굴이후의 부재 거동에 대해서 안정적인 결과를 제공하였다. 또한 수치해석 결과는 좌굴실험을 통해 얻어진 축내력에 비해 높은 내력을 보여주고 있다. 이는 실험과정에서 발생하는 편심에 의한 영향으로서 수치해석에 의한 좌굴내력에 적정한 보정치의 적용이 필요하며 본 논문에서는 기존 실험데이터와의 비교를 통해 0.88의 값을 제시한다.

• 한국비블리아학회지
• /
• 제35권2호
• /
• pp.157-183
• /
• 2024

본 연구는 원격 학습자의 정보추구행동 모델을 활용하여 국내 대학원 전공 공통 과목 연구방법론을 개발하는 것을 목표로 한다. 국내 대학원 교과목 개설 현황 사례 조사, 재학생의 교과목에 대한 수요 조사를 바탕으로 정보추구를 유인하는 요인과 방해하는 요인을 정리하였다. 재학생이 연구방법론을 통한 정보추구를 유인하는 요인은 학위 취득이며, 방해하는 요인은 학업과 직장을 병행하는 환경으로 나타났다. 연구 결과는 유인 요인을 동기부여로 활용하고 방해 요인을 보완하는 방법으로 교과목을 개발하였다. 연구의 결과는 온라인 교과목 개발을 할 때 학생의 정보추구행동에 대한 이해를 높이고 학생의 정보추구 능력을 기르는 교수학습 전략을 수립하는데 기초자료로 활용될 수 있을 것이다.

• 동력기계공학회지
• /
• 제13권2호
• /
• pp.36-41
• /
• 2009

An experimental investigation was conducted to examine the fluid flow resistance in the rectangular channel with two inclined wire screen baffles. Two different types of wire screens; dutch weave and plain weave, were used as baffle devices in this experiment. Three kinds of baffles with different mesh specifications were made up of dutch type and four different kinds of baffles were made up of plain weave type. The stainless steel wire screen baffles were mounted on the bottom wall with varied angle inclination. Reynolds numbers were varied from 23,000 to 57,000. Results show that the mesh number of baffles plays an important role on friction factor behaviour. It is found that the baffle with the most number of meshes (type SA) has the highest fluid flow resistance.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.32-38
• /
• 2004

The chatter behaviour in endmilling is a complex and nonlinear phenomenon, so it is very difficult to detect and diagnose this chatter phenomenon, This paper presents new method for the detection of chatter in endmilling operation based on the wavelet transform. In this paper, the fundamental property of the wavelet transform is reviewed by comparing the spectrum of other algorithm such as FFT. This result using wavelet transform shows the possibiling of the chatter detection in endmilling operation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.410-413
• /
• 2006

The ㄱ type perfobond rib shear connector is a ㄱ type flat steel plate with a number of holes punched through. This connector can be effectively used in girder with high shear. The ㄱ type perfobond rib shear connector exhibit very stiff behaviour under service load conditions and also had the characteristic of retaining a significant amount of load after the attainment of ultimate capacity. The ㄱ type perfobond rib shear connector with safety factor of 3 is applied shear connector of CFT composite girder. From static test result of CFT composite girder, relative displacement of 0.01mm measured at the service load moment. At design of the ㄱ type perfobond rib shear connector, applying safety factor of 3 was more conservative than test result.

• 전기화학회지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2009

This article reviewed transport behaviours of electroactive species in ionic compounds, focusing on chemical diffusion of Li through the transition metal oxide in a current flowing condition. For this purpose, a distinction has been first briefly made between migration and diffusion with respect to current, driving force and charge of electroactive species considered. Then, the equations for chemical diffusion are derived theoretically in open-circuit and current flowing conditions. Finally, the experimental methods such as ac impedance spectroscopy and current (potential) transient techniques are described in details for characterising chemical diffusion. In addition, the role of the thermodynamic enhancement factor in chemical diffusion is discussed.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.10-16
• /
• 2004

The detection and analysis of chatter behaviour in endmilling is very complex and difficult so it is necessary to detect and diagnose this chatter phenomenon clearly. This paper presents a new method for detecting the abnormal chatter in endmilling operation, based on the wavelet transform. Using AR spectrum the data that has chatter phenomenon was verified and the fundamental property of chatter and its characteristics in endmilling by using the wavelet transform is reviewed. This result obtained by wavelet transform proves the possibility and reliability of detecting the chatter in endmilling operation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.527-532
• /
• 1997

Design strength of structural members could be determined by applying a strength reduction factor to nominal strength. At the beginning point of the transition region for the strength reduction factor, P=0.1$\sigma$$_{ck}A_g$, only sectional area and concrete strength are adopted as the variables of P=0.1$\sigma$$_{ck}A_g$. Therefore, P=0.1$\sigma$$_{ck}A_g$ is the empirically adopted which does not consider steel ratio, steel yielding stress, and steel arrangement. So, this research was perpormed the computer program for the analysis of axial force-moment-curvature relationship of reinforced concrete columns by sectional behaviour nonlinear analysis using a concrete compressive stress-strain curve, in order to investigate the ductility of reinforced concrete columns. As a result, ductility indicies of axial force, P=0.1$\sigma$$_{ck}A_g$, represented the lack of consistency of the indicies value for the various sections.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.797-804
• /
• 2001

To obtain representative fatigue crack growth characteristic curve in residual stress field, fatigue crack growth test was carried out at various stress ratio and fatigue crack growth characteristic curve was represented using crack closure concept. Obtained results are as follows;K(sub)op/K(sub)max was independent of K(sub)max when R was lower than 0.5 and crack closure phenomenon was not observed when R is higher than 0.5. therefore neglecting crack closure behaviour, actual fatigue crack growth rate can be underestimated. Thus, considering crack closure phenomenon, fatigue crack growth characteristics curve of A 106 Gr B Steel weldment can be effectively estimated.