• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.107-115
• /
• 2013

Purpose: This study was conducted to investigate the change of soft contact lens parameters after eyeliner deposition and compare the cleaning efficiency and the recovery rate of lens parameters by different cleaning methods. Methods: The eyeliner was deposited on three types of soft contact lenses made of different materials for 1 hour, 4 hours and 6 hours and those lenses were washed by the eyeglasses ultrasonic cleaning and by hands. The changes in visible light transmittance, diameter and surface of those lenses were compared before and after cleaning of the lens. Results: The visible light transmittance of soft contact lenses decreased along with the deposition time of eyeliner. The patterns of the eyeliner deposition on soft contact lens appeared differently depending on the physical properties of the lens material. Thus, the largest eyeliner deposition was found on narafilcon A lens. The diameters of hilafilcon B and etafilcon A lenses were decreased, however, the diameter of narafilcon A lens was increased. The cleaning efficiency of the eyeliner deposition was greater with the multipurpose solution by hands than with the eyeglasses ultrasonic cleaner. However, the recovery of lens parameters such as the lens diameter, visible light transmittance and lens surface due to the eyeliner deposition to its original state was limited. Conclusions: From these results, it is suggested to minimize eye makeup when wearing soft contact lens. Furthermore, the reduced wearing time and shorter cycle of lens replacement may be needed by considering a change of lens parameter when the repeat eye makeup is applied.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2020

It is going to select one X-ray generating device for diagnosis in a radiography laboratory at K university in Gangwon-do to detect bacteria on the surface contamination of tables, IP cassettes, and lead gowns for medical radiation shielding and to inform students of the need for proper disinfection control and hand hygiene. Then disinfection was carried out with tissue, tissue cleaner and 70% alchol and immediately collected with sterile cotton swabs to assess the contamination distribution status and disinfection effects of the surface. The results of measuring the degree of contamination on the surface showed that the largest number of bacteria were detected in Apron, and the evaluation of the disinfection effects according to surface contamination showed a noticeable effect at 70% Alcohol in IP Cassette, and the disinfection effect was the same for Apron. Therefore, in order to prevent bacterial infections among students, basic hand washing and regular disinfection should be performed before the practice to prevent infection.

• Child Health Nursing Research
• /
• v.19 no.3
• /
• pp.159-167
• /
• 2013

Purpose: The purpose of this study is to find out preschool children's health status and their mothers' health management in the vulnerable classes. Methods: The assessment tool was developed, taken into consideration existing studies, materials produced by the customized visiting health care system, and review of visiting nurses of health centers and related experts. Data were collected January to February 2010 from 259 mothers by visiting nurses, and analyzed using SAS program for descriptive statistics. Results: Body weight less than 3 percentile was found for 5.0% children and over 97 percentile for 7.7%. Atopy was found in 17.8% children, no hand-washing after toileting and before meal in 30.9% and 36.7% respectively, no breakfast in 15.8%, and irregular meal in 32.0%. Sex education was made by 45.7% mothers, regular dental check by 56.6%, and hearing and eyesight test by 61.1% and 66.8% respectively. Home environment for upbringing is 34.3 in the scale of 41, and accident prevention 17.5 in the scale of 22. Conclusion: It is necessary to make an intervention on children's weight, personal sanitation and meal time in the vulnerable classes. Mothers need to be educated for appropriate health care, and home environments to improve upbringing and accident prevention.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.170-170
• /
• 2003

An initial study has been conducted with Korea Institute of Geoscience and Mineral resources and National Institute of Environment Research to evaluate the distribution of radon levels and their risk levels of groundwater in Korea. Probability distribution of 616 samples was log-normal one with 1,867pCi/L as arithmetic value, 920pCi/L as median and 40,010pCi/L as maximum during iou. years(1999-2002). In addition, 10% of total samples are in excess of 4,000pCi/L, 20% in excess of 2,700pCi/L, and 30% in excess of 1,700pCi/L, and 15 samples exceeds 10,000pCi/L. Total samples are grouped into 10 areas and 5 rocks unit, and difference of concentrations among areas and rocks are statistically significant(respectively, p<0.0001). The highest area is Daejeon located in ogcheon metamorphic rocks and granitic rocks, and most of all sites with high concentration sites are located in granitic rocks. The lowest area is Jeju located in volcanic rocks. We have estimated excess cancer risks of radon based on these data. To estimate risks, first of all, use patterns of groundwater are categorized with 6 groups: for drinking, household, farming, washing cars, raising stock, and others. We considered risk only for drinking water and household water because radon is rapidly dispersed before it of other use reach human respiratory organs. We select 565 samples for risk analysis, and applied unit risk which is 6.6210-7 per pCi/L to be recommended by NAS committee. Unit risk was derived from considering radon ingestion and radon inhalation from water use. When estimating risk, we analyzed PDF of concentration and represented risk as 50 and 95 percentile values to consider uncertainty with Monte-Carlo simulation. It results in 10-4 level of their excess cancer risk and in 10-2 level in some areas with high concentration of radon. It must be monitor periodically and take adequate actions in these risky sites. We recommend that it needs to take more survey and finally set guideline for radon regulation in groundwater.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.63-69
• /
• 2006

The primary objective of this study is to determine whether a diet supplemented with brown rice koji (BRK) results in a reduced stress response in rats and mice. BRK, which has been suggested as a candidate for use as a stress- and fatigue-fighting supplement, was compared with red ginseng extract (RG) for its stress-reducing potential. The animals in this study were divided into no-stress, stress, RG, and BRK groups of 8 to 10 animals each. Stress was induced by means of immobilization (being restrained in plastic tubes for 30 min and electroshock (0.5 mA in mice or 2 mA in rats for 5 min). The no-stress group was not exposed to stress. Rats in the RG group received oral doses of 200 mg RG extract/kg body weight daily. The BRK group was fed a 30% BRK diet and exposed to stress. Animals were given supplements for 7 days before being exposed to stress, and then were given supplements for 5 days with exposure to stress. When the stress exposure ended, the animals were observed for stress-related changes in behavior and their plasma corticosterone levels were measured. BRK supplementation was associated with a partial blockade of the effects of stress on locomotion and elevated plus-maze test results in rats and mice. It was also associated with a partial reduction in stress-induced behaviors such as freezing, burrowing, smelling, face-washing, and rearing. BRK supplementation did not have a significant effect on plasma corticosterone levels, which were increased in the animals exposed to stress (p<0.01). The mice in the RG group received RG in water (2 mg RG/ mL $H_2O$), and the BRK group received a 30% BRK diet (weight) for 7 days. Both groups were evaluated for signs of fatigue. BRK supplementation increased endurance, as indicated by time on the rota-rod, in cold water, and on the horizontal wire. These results suggest that BRK supplementation partially protects the animal from the effects of stress and may also contribute to resistance to fatigue on physical exertion.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.377-398
• /
• 1993

A survey of infant practices was conducted to provide information on which to base planned nursing interventions. The subjects were a convenience sample of 168 mothers visiting out - patients departments of five general hospitals and one public health center in Seoul for immunizations or treatment for common colds for their infants from two to 12 months of age. Data collection was carried out from July 8th to September 30th, 1991 using a questionnaire of 84 questions, 31 on the type of feeding, 22 on supplementary feeding and 21 on demographic infer mation. The results are summarized as follows : 1) The type of feeding was primarily artificial feed-ing (63.1%), followed by mixed feeding (22%) and breast feeding (14.9%) of the 59 mothers expecting during pregnancy to breast feed, 54. 2% changed artificial feeding and 30.5% went on to breast feed as they had expected. For mothers expecting to continue breast feeding over seven months. only one infant was being breast fed for over seven months. 2) For the 106 mothers using artificial feeding, 70. 8% hed attempted breast feeding, 64% of them for less than a month. Breast milk had been suppressed by for medication (38.7%) : 34.9% had used no specia] means. 3) The major reasons for replacing breast feeding with artificial feeding were the infants' demand for more milk (47.2% ) and insufficient supply of breast milk (49.3％). 4) Most mixed feeding was started at the age of one to three months (59.5%). Only 34.4% gave an artificial feeding after breast feeding : most (46%) alternated breast feeding with artificial feeding. On the whole, the motive for mixed feeding was the lack of breast milk (70.3%). 5) Many mothers (81.8%) were adding vitamin or mineral supplements to artificial milk and 51.5% were adding something to faciliate digestion. As for the method of sterilizing milk bottles and nipples, 56% had sterilized them together in boiling water from the beginning : 27% were just washing the bottles after boiling only once initially when measuring artificial milk powder, 31. 5% of the mothers over filled the measuring spoon rather than to the level. 6) The mother's occupation was related to her way of feeding. Mothers at home full time did more breast feeding than mothers employed outside the home. (x²=5.72, p=〈0.05). 7) Most mothers began supplementary food, from three to four months (48.8%) : 11.2% began later than seven months. Supplementary food was given between milk feedings by 67.2% of the mothers : 19.2% gave it before a milk feeding. Some mothers(26.4%) made their own supplementary food : 19.2% used ready - made supplementary food products for convenience. Recommendations for nursing interventions included : 1. Prenatal education about the advantages of breast feeding and breast care, and home visits after delivery for counselling related to breast feeding. Correct preparation of artificial feeding methods need to be taught in both pre & postnatal periods. In addition, specific education about supplementary feeding needed. 2. Further research is indicated about the Perceived lack of supply of breast milk and about the effectiveness of nursing interventions to Promote breast feeding.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.566-574
• /
• 2001

For decades it has been a clinically accepted requirement, in case of salivary contamination, to re-etch conditioned enamel and dentin to proceed with the adhesive technique. Only a few reports have been so far dealing with the potential of one-bottle adhesive system to bond even when applied after salivary contamination and without re-etching. The purpose of this study was to evaluate the influence of the salivary contamination on the shear bond strength of dentin. The results were as follows: 1. In group II, in which saliva contamination and washing occurred before applying of Prime & Bond NT showed high shear bond strength as in control group. In Group III and IV, in which the cured adhesive was contaminated with saliva, showed significantly lower mean bond strength, 2. Relating long resin tags of $70\sim120{\mu}m$ were observed in samples of all groups under SEM. We could observed hybrid layer, resin tag and many lateral branches in every group. And there were no differences between groups.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.235-241
• /
• 2017

To preserve genetic materials, cryopreservation of the semen from live animals is the main technique to establish cryo-banking system which could be used for artificial insemination and embryo transfer. However, the population of Korean black goat (KBG) becomes to dwindle in number and is now faced genetic erosion by crossbreeding with non-native breeds in small KBG farms. In this study, simple freezing method was used to preserve frozen semen from KBG using spermatozoa of cauda epididymis (CE) and electro-stimulated semen (ES). The negative effects of seminal plasma on fresh sperm was confirmed using precipitation test of Triladyl egg yolk diluent and sperm viability after thawing was compared between CE and ES spermatozoa. When seminal plasma of fresh ES semen was washed with semen washing media (SWM), the rates of live sperm shown no significant difference between CE and ES spermatozoa before freezing. However, the survival rate of frozen/thawed CE sperm was higher than ES ($74.6{\pm}10.6%$ vs $53.8{\pm}5.2%$) with significant difference (p < 0.05). The results of longevity test on frozen/thawed sperm from CE showed healthier sperm than ES. Therefore, spermatozoa from CE could be used for cryo-banking system in KBG lines. The more studies are needed to increase survival rate of ES semen.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.433-439
• /
• 2005

The copolymers were prepared by the emulsion copolymerization of fluoroalky lacrylate-stearylacrylate-m-isopropenyl-${\alpha},\;{\alpha}'$-dimethylbenzyl isocyanate (TMI) in order to obtain water repellent polymers. The respective copolymerization rates of the three monomers considerably depended upon the use of the nonionic emulsifier and the nonionic-cationic mixed emusifier, and the optimum conditions were obtained. The particle sizes of the copolymers were in the range of 105 to 222nm. The particle sizes of the copolymers prepared by the use of the mixed emulsifiers were smaller than those of the copolymers prepared by the use of the nonionic emulsifier. The reactions of both TMI-N-methyl acetamide and TMI-cellobiose did not take place. However, the reaction of TMI-n-butylamine occurred. The water contact angles before and after washing three times for nylon and poly(ethylene terephthalate) (PET) fabrics coated with the copolymer prepared by the use of mixed emulsifier were about $139^{\circ}\;and\;133^{\circ}$ Therefore, the copolymer showed good durable repellency for nylon and PET.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.442-452
• /
• 2010

Our team carried out a new program for public engagement on nanotechnology in Korea. We chose 22 monitors, who majored in science or technology and graduated from universities long time ago. Most of them were married and housewives. This 'focus group' had not only general knowledge about science or technology but also much interest in social activities. The 167 nanoproducts to be monitored were for daily life, e.g. home appliances (washing machine, refrigerator, water purifier, etc), clothing, cosmetics, food, toy, and others. And the period of it was one month. The monitors had a sheet with 10 questions, and filled them out in essay form. All of them submitted 2~3 sheets every weekend to our team. Before monitoring, our team had a meeting for introduction and explanation about the potential risk of nanotechnology as well as benefits from it. Another meeting was held after finishing monitoring to share their experience one another. The main results of the monitoring were as follows: the number of nanoproducts describing both the definition of 'nano' and the size of nanomaterials was just 2 (1.2%) the number of them explaining the technical methods enough was 15 (9/0%) the number of them accounting for the reason of functional improvement enough was 14(8.4%); the number of them doubtful as if there would be exaggeration or false knowledge was 27 (16.2%); the number of them commenting potential hazards to human health or environment was almost zero; the number of them describing about safety certification acceptable was 9 (5.4%). The monitors made a proposal containing recommendation to Government and industry. The contents were as follows: industry should make the manual in detail and correctly, Describe Certificate detailed and correctly, Do research on risk and toxicity continually, Educate employee about nanoproducts at consumer's center; Government should make indication of nanoproducts compulsory, Appoint Certificate Authority and make Certificate Mark guaranteeing the safety on nanoproducts, Make detailed explanation about nanoproducts compulsory.