• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• 한국콘텐츠학회논문지
• /
• 제10권8호
• /
• pp.283-291
• /
• 2010

이 연구의 목적은 인체모형을 이용하여 옮기기 활동을 하는 동안 발의 배치(11자 배치와 $90^{\circ}$배치)와 옮기는 지면의 높이(휠체어 좌석과 같은 높이와 다른 높이)가 허리척추에 미치는 영향을 알아보는 것이었다. 자발적으로 실험참여에 동의한 건강한 남성 15명을 대상으로 4가지 조건에 따라 옮기기 활동을 실시 하였다. 옮기기 활동 동안 허리척추의 작업부담을 알아보기 위해, 위팔두갈래근, 척추세움근, 넙다리근의 근활성도를 표면근전도로 측정하였고, 힘판을 이용하여 수직 지면반발력을 측정하였고, L4/L5에 가해지는 압박력을 3DSSPP를 이용하여 측정하고 분석하였다. 그 결과, 오른쪽 넙다리근의 근활성도를 제외한 나머지 근육의 근활성도는 각 조건 사이 유의한 차이가 없었다. 수직 지면반발력은 각 조건 사이 유의한 차이가 있었다(p<.05). 또한 L4/L5에 가해지는 압박력은 같은 높이인 경우 발의 배치에 따라 유의한 차이가 있었다(p<.05). 따라서 옮기기 시 발을 11자로 배치하는 것보다 발을 90°로 배치하는 것이 체중이 한쪽으로 쏠리는 경향과 L4/L5 압박력을 줄이는데 도움이 되기 때문에 환자 옮기기 시 이를 적용하는 교육이 필요할 것이다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3017-3029
• /
• 2023

In the late in-vessel phase of a nuclear reactor severe accident, the internal heat transfer and crust evolution during the debris bed melting process have important effects on the thermal load distribution along the vessel wall, and further affect the reactor pressure vessel (RPV) failure mode and the state of melt during leakage. This study coupled the phase change model and large eddy simulation to investigate the variations of the temperature, melt liquid fraction, crust and heat flux distributions during the debris bed melting process in the hypothetical severe accident of HPR1000. The results indicated that the heat flow towards the vessel wall and upper surface were similar at the beginning stage of debris melting, but the upward heat flow increased significantly as the development of the molten pool. The maximum heat flux towards the vessel wall reached 0.4 MW/m². The thickness of lower crust decreased as the debris melting. It was much thicker at the bottom region with the azimuthal angle below 20° and decreased rapidly at the azimuthal angle around 20-50°. The maximum and minimum thicknesses were 2 and 90 mm, respectively. By contrast, the distribution of upper crust was uniform and reached stable state much earlier than the lower crust, with the thickness of about 10 mm. Moreover, the sensitivity analysis of initial condition indicated that as the decrease of time interval from reactor scram to debris bed dried-out, the maximum debris temperature and melt fraction became larger, the lower crust thickness became thinner, but the upper crust had no significant change. The sensitivity analysis of in-vessel retention (IVR) strategies indicated that the passive and active external reactor vessel cooling (ERVC) had little effect on the internal heat transfer and crust evolution. In the case not considering the internal reactor vessel cooling (IRVC), the upper crust was not obvious.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4125-4132
• /
• 2011

IPTV 멀티캐스팅 서비스에서 증가되는 네트워크 트래픽 로드에 따른 화상 품질 측정과 화상 품질 변화에 대한 연구는 IPTV 서비스에 대한 관심이 현실화됨에 따라 필요하게 되었다. 본 연구에서는 네트워크 트래픽 로드에 따른 화상 품질의 효과가 주어지는 네트워크 성능 요소의 최적의 값을 파악하기 위하여, 테스트 베드 네트워크를 통하여 테스트 하는 S/W를 개발하였다. 그리고 테스트 환경을 학교 네트워크로 확장하여 실제 IPTV 서비스 환경과 비슷한 학교 네트워크에서 네트워크 트래픽 로드 증가에 따른 IPTV 멀티캐스팅 서비스의 화상 품질 변화를 측정하고자 하였다.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.645-655
• /
• 2022

Granular columns have recently found widespread use in underground construction. The behaviour of granular columns under vertical loads has been extensively studied, specifically in relation to vertical load capacity obtained by bulging of the column body, including the behaviour after encasement of material. Determining the shear strength of loose soils reinforced with granular columns has received less attention. After the observations of lateral deformation near the toe of the embankment, attempts have been made to strengthen the lateral strength of granular columns. The purpose of this research is to look into the effects of different encasement conditions on the lateral load capacity of granular columns. This was accomplished by three-dimensional finite element analysis with FEM software. Various normal pressures and two different encasement configurations, namely single layer encasement and double layer encasement, with differing tensile strengths, were used in this study to determine their effect on lateral resistance. The failure envelope for a single column planted in loose sand was used to analyse the findings for three different granular column diameters, as well as the impact of different encasement conditions. According to the findings, the inclusion of a Granular Column enhanced the shear strength and overall stiffness of the loose sand bed, and the encasement of the Granular Column helped in deriving higher lateral resistance.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.37-40
• /
• 2007

Although masonry buildings fell into disfavour in the 1990's because of factors such ac bricklayers' high labor costs, bad reputation of poorly constructed masonry, masonry face wall is still preferred in korea as well as in other countries for its decorative value. Recently may problems with masonry face wall with opening have been reported, including cracks, deflection, swelling and even wall collapse in old masonry buildings, that mainly induced from the corrosion of connecting materials. So, it is necessary to develop the effective and uncorrosion connector. Therefore, this study aims to investigate the structural performance of masonry face walls with opening constructed by new connectors, spiral stainless anchors and to provide basic data for the field application of this method. The specimen reinforced bed joint has maximum load and displacement any other specimens.

• 한국수자원학회논문집
• /
• 제44권1호
• /
• pp.31-40
• /
• 2011

본 연구에서는 2차원 하상변동 수치모형인 CCHE2D 모형을 이용하여 낙동강하구둑에서의 퇴사저감 방안을 분석하였 다. 현재 매년 시행되고 있는 준설방법에 대한 효과를 정량적으로 분석하였으며 준설방법을 대체할 수 있는 퇴사저감 방법으로 하폭축소를 통한 퇴사저감 방안에 대해 모의를 수행하였다. 분석에 사용된 모형은 각각 유사량 공식과 유사이송 형태에 대해 모형 검보정을 수행하였으며 낙동강하국둑의 경우 Ackers and White (1973) 공식과 소류사 형태의 유사이송 방식을 수치모의 시 사용하는 것이 실제 하상변동 결과와 가장 유사한 것으로 나타났다. 검보정된 CCHE2D 모형을 이용하여 현재 시행되고 있는 준설방법에 대한 분석을 수행하였으며 그 결과, 준설이 수행된 구간에서 평균 0.2m의 퇴적량 감소를 확인할 수 있었다. 또한, 하폭축소를 통한 퇴사저감 분석 결과, 평균 0.4m의 퇴사저감 효과가 있는 것으로 나타났으며 특히 하폭이 축소된 구간에서는 축소전과 비교해 최대 2.0m 정도의 퇴사저감 효과가 있는 것으로 분석되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권5호
• /
• pp.316-322
• /
• 2002

A newly isolated heterotrophic marine bacterium, Vibrio alginolyticus, was used to remove a high load of ammonia gas under non-sterile condition. The cells were inoculated onto an inorganic packing material in a fixed-bed reactor (biofilter), and a high load of ammonia, in the range of ammonia gas concentration of 170 ppm to 880 ppm, was introduced continuously. Sucrose solution and 3% NaCl was supplied intermittently to supplement the carbon source and water to the biofilter. The average percentage of gas removed exceeded 85% for 107-day operation. The maximum removal capacity and the complete removal capacity were$19\;g-N\;kg^{-1}$ dry packing material $day^{-1}$ and $16\;g-N\;kg^{-1}$ dry packing material $day^{-1}$, respectively, which were about three times greater than those obtained in nitrifying sludge inoculated onto the same packing material. On day 82, the enhanced pressure drop was restored to the normal one by NaOH treatment, and efficient removal characteristics were later observed. During this operation, the non-sterile condition had no significantly adverse effect on the removability of ammonia by V. alginolyticus.

• 한국수산과학회지
• /
• 제50권3호
• /
• pp.250-256
• /
• 2017

This study investigated the removal efficiency of organic matter and nitrogen from fish farm effluent by hydraulic retention time (HRT) using an upflow biological filter (ANR system) reactor. The recycling time and influent flow in the reactor were controlled to 14.8, 7.4, 5.5 and 3.2 h to evaluate HRT. In addition, each reactor was coupled to a fixed bed upflow filter charged with media. The results showed that removal efficiency was ${\geq}95%%$ with an HRT of 5.5 h, and nitrification efficiency was reduced to 81% with an HRT of 3.2 h, although nitrification efficiency temporarily decreased due to the shock load as HRT decreased. Total nitrogen removal rate was also reduced to about 65% with an HRT of 3.2 h, which was considered a washout effect of nitrifying and denitrifying microorganisms by increasing the shearing force to the filter media, which decreased organic matter and nitrogen removal efficiency.

• 농업과학연구
• /
• 제38권1호
• /
• pp.101-108
• /
• 2011

In forest work, working conditions are very hard to improve. The proper distribution of work time and good posture is believed to bring about direct improvements such as accident prevention. On this, this study has analyzed forest workers' posture and their working hours in order to improve their working conditions in stone channel work. Authors has chosen several core elements of stone channel work to focus on, which include stone masonry, excavation of bed, moving stone, directing work, choosing stone, and breaking stone. The ratio of real working time over total working time was shown as 84.6%. As for the time ratio of each elemental work over the real working time, the stone masonry was 60.4%, the directing work was 15.1%, moving stone was 12.1%, choosing stone was 7.1%, breaking stone was 3.3%, and excavation of bed was 2.0%. According to the analytical results provided by OWAS, the ratio of category III (Work posture has a distinctly harmful effect on the musculoskeletal system) has shown that moving stone turned out 65.2%, choosing stone was 61.5%, stone masonry was 46.1%, breaking stone was 14.3%, excavation of bed was 12.5% and directing work was 6.8%. Furthermore, the ratio of category IV (Work posture with an extremely harmful effect on the musculoskeletal system) has shown that excavation of bed turned out 37.5%, breaking stone was 28.6%, stone masonry was 27.3%, choosing stone was 7.7%, moving stone was 6.1% and directing working was 4.5%. These results are expected to be utilized for the improvement with respect to both working methods in the stone channel work and the workers' working posture.